Acrobat 9 Distiller Error, Win7 64bit

Hi Guys,
I am having a problem on Acrobat 9 distiller when it creates a pdf it gives this error:
D:\xxxx\ssss\somefile.ps
Cannot open this file.
Please check that correct path and filename are given.
I am using Office 2010 Pro as well.
Please I need help,
Regards,

Similar Messages

Acrobat Distiller Error 5 message when scanning?

Acrobat Distiller unable to create temp folder error 5 message when scanning. I can print no problem cannot scan with error?

Hi,
Similar issues have been resolved in earlier posts - Re: Error 5 from Acrobat Distiller - Cannot print to PDF
Assuming by Error 5 that it is related to Access Denied problem:
1. Clean up the contents of your %temp% folder.
2. Give full permissions to the %temp% folder
Try working with Acrobat after this.

How am I meant to correct my Framemaker files to solve this Acrobat Distiller error?

When I attempt to generate a PDF from Framemaker 9 using Distiller 8.1 I get the following error:
%%[ Error: ioerror; OffendingCommand: imageDistiller; ErrorInfo: DCTDecodeFilter Second SOI or SOFn JPEG marker is disallowed ]%%
Stack:
-dict-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%"
No PDF is created. I've tried 'save as' and 'print'. I have created a PDF from this document several times before with no issues. I haven't replaced any of the screenshots in this version. Where can I find the graphic that is causing the problem? How can I solve this?
Thanks,
Niall.

1. To turn "off" the graphics, simply use the esc v v shortcut (this is a toggle on/off) at the book level (no need to remove anything).
2. Render in Error's context means, then run it again with no graphics visible (but it's obvious from the Distiller error messages that the problem is in a JPEG that can't be properly interpreted).
3. To isolate the page containing the errant graphic, a binary search apporach means do one half at a time, i.e. the first half of the book abd then the second half, to see where the error occurs. Then split the offending half section into two-halves again and re-create the PDF until you've narrowed down to the page with the error-prone file.
However, you indicate that you're able to create the PDFs properly when printing wthout Generate Acrobat Data enabled. What is you default printer instance and which joboptions are specified?

CS3 Acrobat Distiller Error

I am trying to create pdfs from multiple Indesign CS3 files. When I drop the files (or even just one) in distiller I get the following error that I can't figure out. All images are linked and all fonts are available.
Adobe PDF Settings: /Library/Application Support/Adobe/Adobe PDF/Settings/Smallest File Size.joboptions
%%[ Error: undefined; OffendingCommand: Ìıÿ FÂΩ1ÔÁ˛t∑ DOCUMENT p ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Distill Time: 1 seconds (00:00:01)
**** End of Job ****
Thank you.

Check out this script from Peter Kahrel in the Indesign Scripting forum
http://forums.adobe.com/message/1112917#1112917
It references a batch conversion file that he wrote which will do what you want.
The script name is batch_convert_CS3. You'll have to copy the link and paste it into a browser window. The old links have not been reset.

Unable to "save as jpeg" in Acrobat 7 with Win7-64bit

I am using Acrobat 7.1 with Windows 7 64 bit. I already know that I can't install the PDF printer. But now I can't even open a PDF and SAVE AS a JPEG file. I thought I was doing this with the current configuration, but perhaps I am remembering from when I had a different version of windows on my computer.
If this can be done, does someone have any idea what could be wrong and how to fix it?
Thank you.

Have you checked the Adobe Knowledge base about what Acrobat versions are updated for working with Wndows 7?
You should upgrade to version 9 with all patches.

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

Acrobat 7.0 Distiller error

I have the complete Adobe Creative Suite Premium package, and I recently have started having issues converting Documents or Spreadsheets to PDF. When I click on "Convert to Adobe PDF", after the PDF window opens, I get a Distiller error message, followed by a pop-up with the option to send an error message to Microsoft, or not to.
The Error Message reads:
Acrobat Distiller
Event Type: InPageError P1: c000009c P2: 00000003
When I clcik on the 'details' tab, it points to the following 2 files:
\\WER047e.dir00\acrodist.exe.mdmp
\\WER047e.dir00\appcompat.txt
I have completely removed Creative Suite and reinstalled it,to no avail. I have also tried to remove and reinstall only Acrobat 7.0, with no luck. I have installed Acrobat 7.0 on another PC to see if it would work, and it did.
I am at a loss as to whether this is an error in Acrobat, Distiller or on my PC, and I do not know what steps to take to repair it.
Any advice would be greatly appreciated.
Thanks,
Dave

Do you happen to be using VISTA?

CS4, Win7 64bit Media Encoder Errors

On a fresh install of Win7 64bit, ASUS P6T Deluxe V2 motherboard 12GB RAM, NVIDIA GTX 260 graphic card and all updates (software/hardware), I'm having a bear of a time exporting even a bars/tone test project from CS4. Here is the sequence of events:
1)Create/edit project, export media, I get warning message that an update of Media Encoder is available (but I've already double checked that I'm running CS4 4.2.1 with multiple computer restarts). AME version I have is 4.2.0.006
2) choose export format, location, etc. (I've tried various export formats with no difference in resulting error messages)
3) dynamic link exports the file to AME...BUT....AME doesn't open
4)When I've manually opened AME beforehand, CS4 will export to the queue
5)On attempt to encode I get the message:
- Source File: C:\Users\Oren\AppData\Local\Temp\Zi8 Test_7.prproj
- Output File: E:\Choco Rehab2.f4v
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:18:29
2/6/2010 9:42:25 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
6) I've looked in the folder and indeed, the source file doesn't exist...but it keeps creating this same message, regardless of what project I try to work on.
I've done a re-install (with cleaner script) TWICE already and it is really a time-killer (especially when I defrag the drive in between installs). I beseech Harm and all the other gurus to offer some sage wisdom. Thank you.

I'm the only user on the computer, and I do have full rights to the C: volume. By default, I should be the administrator, is that correct? Thanks again for your offer to help and your invaluable assistance to all Adobe users. With your help (and the upcoming Mercury engine), I hope to have a Matrox-free system eventually. I still have to use my XP-32 matrox and CS3 system until I can work out the kinks that keep me from exporting completed projects on my newly build Win7 CS4 system.
Let me know if anything stands out to you that I'm missing. I'm a bit frazzled currently.
-Oren

Acrobat Distiller 9 Error - Cannot Print PDF

When I try to print PDFs from any browser or piece of software, try to open Distiller directly, or even scan to PDFs, I receive the following error:
Unable to create the temporary folder.
Error: 5 - Access is denied.
I have had no problems until Monday with this. I did not install any new software. I have done the following:
Scanned the computer for Malware (Malwarebytes) - 0 threats found
Scanned the computer for regular virus/registry issues (AVG 2013) - 0 threats found
Repaired Acrobat 9 PRO installation - no change
Rebooted multiple times - no change
My computer runs Windows 7 64-bit, and I have Adobe Web Premium CS5 (which comes with Acrobat 9 PRO). I currently do not have access to the installation discs, as I just moved.

jlk2011 thanks, I found your thread, and it worked! I'm sharing what I did here and then closing the thread.
By holding the Windows key and R down, I typed %TEMP% into the Run field and hit Enter.
I found a temp folder name Acrobat Distiller 9. I deleted the folder. I then created a new folder with the same name, and I was immediately able to print PDFs again. The issue was resolved.

Application on Win7 64bit throws error -50103, but not on Win XP 32bit host

LabVIEW application newly installed on Win7 64bit host throws error -50103.
Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the Win 7 64bit machine.
My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
Why would I get error on one host but not on the other one?
How do I fix this?
Scientia est potentia!

A common error that you can find numerous posts about with a search
http://forums.ni.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3A170&q=5...

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Acrobat Distiller Automation Interface Error

As software developer I try to use the Adobe Acrobat Distiller Automation Interface as described in the document "Acrobat Distiller
API Reference", "Windows Automation".
Now I have found the problem, that if the same user is using the automation interface at the same time, the second user fails with the following error: The server threw an exception. (-2147417851).
I have investigated myself into the problem I discovered that the same user is sharing the acrodist.exe process. How can I now start
an own process to allow parallel execution?
With two different users the problem does not occur.
Thanks for your help
Raphael Affolter

That's what I have done. I have created an own Mutext to synchronize access to the Distiller Interface.
But race conditions exists even with a Mutex on a fast machine because if one process is releasing and the other acquiring the Distiller interface at the same time, the second process may fail.
The documentation says: Each user of the automation interface has its own Distiller instance. There is no sharing of a common Distiller.
Therefore I have tested this and it works fine for different users (even if the EULA prohibits this).
To solve the synchronization and race conditions, even for the same user an own instance should be started or the Distiller should serialize the requests itself (to avoid race condition).
Thanks again
Raphael Affolter

After Acrobat 10.1.8 update, Distiller error

I recently pushed via AutoIT script the Acrobat 10.1.8 Pro update only to users who already had Acrobat X installed (a small test group in IT before deploying to almost 300). After the update ran, all of them got an error message. Title bar: Acrobat Distiller, Message: Error initializing interpreter: Fatal error, with OK and X the only options. They were able to open Acrobat X Pro successfully after this and the update had been applied. I need to get this error resolved before deploying the the rest of the users.
We're on Windows 7 Pro SP1. We did recently upgrade to Adobe Reader 11.0.05, though I'm not sure if these folks have both installed. I always recommend to remove Reader before installing Acrobat Pro.
E Powell
Austin TX

Hi Joseph,
Welcome to the Community!
Check this link for information/solution on 1310 error: http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Thanks!
Ankit

Error Message using Acrobat Distiller

Each time I try to take my Word document I converted to a PDF and changed to Postscript and open it in the Acrobat Distiller I get this error message:
PDF/X Compliance Report
1. Bounding Boxes
   [Violation] Both TrimBoxes and ArtBoxes were found on the following pages:
   Violations: The total found in this section was 125.
2. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 125.
   This document does not pass PDF/X-1a:2001 compliance checks.
</PDFX>
%%[ Warning: Did not pass PDF/X compliance tests. No PDF file produced. ] %%
Can someone tell me what I need to change in Acrobat to pass the PDF/X compilance test???
Please.....

This problem drove me crazy, but I finally (sort of) found the answer. To make a long story short, I eventually realized I had already gotten my file to be in the PDF/X-1a:2001 format even thought I was still getting the TrimBox error. So, my first advice is to go to File > Properties > Custom, and see if PDF/X-1a:2001 is already listed. If so, stop there because you are already good.
If not, you need to run Preflight. Go to View > Tools > Print Production. The menu will show up on the right-hand side. Choose Preflight. Go down to "Convert to PDF/X Compliance" and click it. Then click one of the "Convert PDF/X 1a" options (I don't know what the different options mean, so I just chose the first one). Then click the "Analyze and Fix" button at the bottom. It will prompt you to save this analyzed/fixed document as a different name. If you get any errors, google them and try to fix them. (I was able to figure a few small ones out. My second file didn't have any errors.) Run it again until it is fine.
Here is the key. Go to File > Properties > Custom, and see if PDF/X-1a:2001 is listed. If so, you are good. The mistake I made was at this point to try again to print it to a PDF/X-1a:2001 and I was still getting that Trim Box Art Box error and driving myself crazy until I finally realized that I already had a PDF/X-1a:2001 file even though I was still getting that stupid error.

Acrobat 9 Distiller Error, Win7 64bit

Similar Messages

Maybe you are looking for