Acrobat 9 does not install after Microsoft ODBC Setup on windows server 2003

I recently downloaded Acrobat Reader 9 from Adobe website. The package was consisted of one file AdbeRdr90_en_US.exe with an appx. size of 33.4MB. When i double click this file Microsoft ODBC Setup is started instead of Adobe Acrobat Reader 9 setup. I clicked next and in the end receive ODBC has been successfully installed and after that Acrobat Reader 9 setup is never started. Tried several times but the same thing and unable to install the reader on this windwos server 2003+sp1.
Can anybody help me to resolve this problem?
ishqi92

Probably need to ask in the Reader forum, this is not it. The Reader forum link is listed at the top of this forum.

Similar Messages

  • Install ID CS4 Desktop version in Windows Server 2003

    Is it possible to install Indesign CS4 Desktop Version on Windows Server 2003.
    When i tried to install it was showing Warning with the message
         System requirements not met.
    Regards,
    Suresh

    It can be installed.

  • Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

    We have a report package that generates customised reports
    We generate the PDF's by simply "printing" to the Adobe PDF printer
    In Windows XP Pro (32 Bit) the report creates the PDF perfectly
    In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
    Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
    With thanks
    Mark

    I think it will work fine if you use the "Enterprise" authentication option.  It may have dependencies on 32 bit components.  So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS.  That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels.  I'm not sure if that is considered "full support". 
    We are trying to use the LDAP authentication option, but that tab is disabled.  Other tabs such as Active Directory and WinNT are disabled as well.  There maybe another component that we must bring down to 32 bit processing.
    Is there a way to enable the LDAP authentication configuration tab?
    thanks

  • Install NetWeaver CE 7.1 on Windows Server 2003 32bit, Oracle database

    Hi,
    It is possible install NW CE 7.1 for Oracle on Windows Server 2003 32 bit ?
    I have installed NW 2004s on Windows Server 2003 platform, and I need install CE 7.1 and then ESR.
    I have downloaded CE and ESR 7.1 installs from "SAP Installations & Upgrades" location (DVD number 51033843), but it is only 64 bit version.
    Thank you
    BB

    Yes - because successor releases of Netweaver 7.0 are only available as 64bit. 32bit platfomrs are no more available.
    Markus

  • T420 hyper-v does not install after windows 8.1 RTM

    I am a developer and I had to upgrade my system to windows 8.1 RTM.
    My machine was orginally windows 7, I upgraded to windows 8 and after a few patches and updates all was well. I ran hyper-v vms on my machine the last 1 1/2 year successfully. After the upgrade to 8.1 it would not install the hyper-v feature.
    I verified after the install that my BIOS still had both virtualizaiton settings enabled.  i saw other posts that the issue could be attributed the network card, or video card, or USB 3 being enabled. I am suspecting network driver as I used to run CISCO VPN client 5.x on my windows 8. However, on windows 8 Cisco vpn client did not work if I used the wireless adapter. I got around that issue by using ShrewSoft VPN when I needed to use my wireless network adapter for VPN. Both completely stop working, and once uninstalled could NOT be installed again on windows 8.1 system.
    I also saw that Lenovo may not release 8.1 drives until october, but I really need them now as I can't restore back to windows 8.0 because I need the 8.1 kernel for my work, but then I also need hyper-v to work as well. Any help or sugguestions are welcome.
    A quick point about the message: http://forums.lenovo.com/t5/Windows-8/Hyper-V-on-Windows-8-not-working/m-p/844685/highlight/true#M51...
    vmware does not work if he didn't have virtualization BIOS settings set.
    Solved!
    Go to Solution.

    When I tried to do a clean install of windows 8.1, I found out that I had a bad iso image.  I downloaded it again and then did a clean install and everything works fine now.

  • Ref_cursor -procedure does not work for Microsoft ODBC for oracle driver

    Hi,
    I have a stored procedure to retreive record set values from db.
    so i used PL/SQL table type. that is
    type tt1 is table of ........
    but if i replaced the table type with ref_cursor i get an ODBC error :
    "ODBC driver does not support the requested properties.--2147217887".
    The problem is i get a connection string from other module and i cannot change the connection string.
    So is there a way to get it working the ref_cursor using "Microsoft ODBC for Oracle" driver.
    Thanks

    Babu,
    Not sure, a quick Google indicates it should work (given you're using the correct syntax of course :-) )
    Have you tried the Oracle ODBC driver? Are you using the latest version(s)?
    Of course you're likely to have much more luck if you post this question in the ODBC forum :-)
    ODBC
    Cheers,
    Colin

  • Acrobat does not work after one month

    Recently I reinstalled OS in my computer, of course with installation of Adobe CS6. and the acrobat stopped to work after about one month while photoshop and others work as usual. I would sincerely appreciate if someone could tell me how to fix it.

    Hey claudes1837819,
    Could you please let me know what version of OS are you using.
    For Windows, you might refer the KB doc link mentioned below:
    Doesn't launch after 30 days | Installed as part of a CS6 suite
    Hope to hear from you.
    Regards,
    Anubha

  • WebAnalysis does not start after workspace is set on Windows Authentication

    I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
    [WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
    I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
    As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
    It drives me crazy.
    Hopefully its a small matter for you to solve!
    Thanks in advance.

    Dont know exactly whats happened but I presume something went wrong during the update procedure.
    If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

  • Acrobat does not start after installation

    Recently purchased Adobe Acrobat 11 Standard, did the fresh installation and ran the program.  Nothing appears...
    Searched web and forums and tried adobe cleaner, acrofix, renaming cache file but no luck.
    Tried uninstalling / re-installing (using cleaner too) as well.
    I do not have any creative suite products installed on this PC.  (only Adobe products I have installed are: reader, AIR, flash)
    This seems to be a well known issue.  Is there anything I can try other than the ones I mentioned above?

    I am experiencing the exact same issues as minc76274552 except that I have the acrobat 11 Pro.
    I have been unable to get any assistance at all from adobe, with the exception of this forum, and this is my first post.  No chat, no phone numbers - really frustrating!
    No errors at installation - I have uninstalled and reinstalled multiple times thinking something must have gone awry.  Nothing helps.  When I try to star the program, either by double clicking on a pdf or from the shortcut, I get a rotating circle for a few seconds (like it is starting) and then it just goes away, nothing happens.
    I haven't tried starting as an administrator, but I'll try that next....

  • Acrobat does not open after update

    After an update on the 18th, my acrobat fails to open, it simply opens for less than a second under task manager and then closes without error. A few repair installs, and a couple of restarts later, and I have yet to find even one message about what is wrong. Any assistance would be much appreciated.
    My workstation is running windows 8, on x64 architecture. Event viewer shows no crash errors, and acrobat display no messages either.

    Hi Johann ,
    Could you please tell what version of Acrobat are you using?
    Does this happen with all the PDF you try to open or any specific one'?
    Try running Acrobat in protected mode and see if what is the output.
    Regards
    Sukrit Dhingra

  • Jdk 1.5.0 does not install after RC2

    I had a RC2 on windows 2000
    It didnot appear in the uninstall list
    Now i cannot install sdk1.5.0 - the repsonse is "already installed" FINISHING
    What shall I do to force an installation!

    This was the solution to my problem: Which was that ms install program thought it had 1.5.0 already
    I removed the 2 1.5.0 entries in this tool and that was it.
    From another topic on uninstall:
    "try downloading this from microsoft or use this link.......
    http://download.microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe
    launch the clean up utility then select java to uninstall,.....after it has been uninstalled, install java back.. It should work, i had the same dilemma but all cleared up because of this utility. "

  • Update 7.1.2 does not install after downloading for around an hour.  Wifi on, back up done, have space for update, turned off and on once completed but still doesn't seem to want to install. Help!

    UPdate to 7.1.2 not installing

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
     Cheers, Tom

  • Firefox does not install after downloading

    I am trying to install Firefox on my laptop. I clicked download from the Mozilla website and it downloaded properly but when I click "run" it does nothing.

    Hello dnicolosi, try from : http://www.mozilla.org/en-US/firefox/all/
    see also : https://support.mozilla.org/en-US/kb/how-download-and-install-firefox-windows
    thank you

  • Ir remote does'not function after upgrading from Vista to Windows 7

    I just upgraded to Windows 7 Pro from Vista Home Premium. I was able to get most of my drivers to work; however, I was not able to find th edrivers/software for my IR remote control. Has anyone else figured this issue out, or what drivers/software I should get fix the error? Thank you.

    ArtAppreciator,  I have the same problem. Installed Windows 7 and now my HP USB TV Tuner is not working. Worked fine on Vista. I can get passed the signal setup but get an error when Media Center tries to detect the IR receiver. Any thoughts?

  • Error while installing SAP IDES ECC6.0 on windows server 2003.

    Hi gurus,
      I am getting error in installing SAP IDES ECC 6.0. In import ABAP step i am not able to execute all 19 services only 1 services is getting fail that is related to sapview.So,can anyone suggest me that how to solve this error and complete installation.
    Thanks in Advace,
    nainesh patadia.

    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726222931
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223305
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Jul 17 2007 01:28:45
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
    (DB) ERROR: db_connect rc = 256
    (DB) ERROR: DbSlErrorMsg rc = 99
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223306
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223709
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Jul 17 2007 01:28:45
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
    (DB) ERROR: db_connect rc = 256
    (DB) ERROR: DbSlErrorMsg rc = 99
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223710
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100811085903
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Jul 17 2007 01:28:45
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
    (DB) ERROR: db_connect rc = 256
    (DB) ERROR: DbSlErrorMsg rc = 99
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100811085911

Maybe you are looking for

  • Swing and Active rendering problem

    Hopefully this is the right place to post. I have a problem with active rendering and swing. Basically my code below messes up when I start rendering the swing either using repaint() or paint(g). If I use repaint() then the gui flickers like mad and

  • OPEN PDF'S IN ACROBAT - NOT PREVIEW

    Don't know if this is the proper forum - but does anyone know how to direct PDF's to be opened in Acrobat as opposed to reader ? Like in the rest of the known universe ? Thanks, Sterne

  • Short dump in every transaction during support pack import  In PRD server

    HI While trying to applying support pack stack, get short abap dump, but after this in every tx same dump is there. Following is the Support stack that we are applying SAPKA70020 SAPKB70020 SAPKIPYM10 SAPKW70022 SAPKNA7017 SAPKH60012 SAPK-60008INFINB

  • What is the use of these filters in atg

    Hi Guys, In my web.xml file i have code like this <filter>         <filter-name>PageFilter</filter-name>         <filter-class>atg.filter.dspjsp.PageFilter</filter-class>     </filter>     <filter>         <filter-name>ForwardFilter</filter-name>    

  • 1003 error at invoke node in .exe

    Hello! I Have a problem at an invoke node when running an .exe and I have no idea what the problem is. There's no problem in the development system. Here's a picture of the code.. Thanks in advance Attachments: exe_error.JPG ‏72 KB exe_error1.JPG ‏72