Acrobat 9 inserting vertical lines after Optimize - Deskew

Hi,
Acrobat 9 Standard, Vista x64, 4gb ram.
Creating a PDF from a series of Tiff images. All is fine so far.
I run the "Optimized Scanned PDF", choose only option as Deskew (all others off), highest-quality setting. Then, I see several pages where there is a vertical black line on the right hand side. This is not visible when printing or viewing on non-Adobe PDF viewers.
Is there a reason this line is here, and can I get rid of it? Thanks.

Remember that as of PDF 1.4, the version number in the PDF header can be overridden via a /Version key in the /Catalog dictionary. In addition, the presence of an /Extension dictionary (ISO 32000-1) will also override the header version.
The header version is JUST A HINT - it is NOT a guarantee of any sort.
Based on both of the above, neither of your "bugs" are bugs.
Acrobat 9 (and I assume X as well) are reporting correctly. If you have a PDF that you believe IS being reported incorrectly, please post!
If the Extensions dict is present, the Save command will NOT override it since it takes precedence.

Similar Messages

Report Painter insert blank line after report header

Hi Expert,
I have a problem to insert a blank line (a spacing) after the report header of my customized report painter.
For example, in standard cost center report, S_ALR_87013611, there is a small box listed information like cost center/group ... and reporting period.
Right after reporting period, the report header box ends, and there is a space line between it and the cost element data ...
For my customized report painter, I cannot make this space line.
I tried edit > row > insert blank line ... but not successful ... kindly advise.
Thanks and regards,
-CK

Hi
In KKO2 go to output tab, here under layout, tick header and then press pencil symbol and in the editor you write your header. I think this will give you desired result.
Regards
Rajneesh Saxena

My hp pavilion dm-1 screen shows red,blue vertical line after switch it on

after switching on boot menu comes ,then the screen turns into a red blue vertical line.what should i do?

Hi,
I've replied to the private message you sent me regarding this issue.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Inserting Blank Line after subtotal in ALV

Hi,
I am using REUSE_ALV_GRID_DISPLAY for my report output and I am displaying the following fields :
Company Code Comp Name Bank Name Amount Data
I am sorting my output based on the company code and displaying the subtotal for each company code.
My requirement is that I need to insert a Blank line after every subtotaled value in the report output. like after the subtotaled value of company code say XXX a blank line should be inserted and then I should start displaying data for company code YYY.
Please let me know if this is possible and if yes how to do that.
In case I am not clear with my question please let me know.
Regards,
Lalit Kabra

Hi,
Following is my code ::
wa_sort-fieldname = 'BUKRS'.
wa_sort-tabname = 'WT_OUTPUT'.
wa_sort-spos = '1'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
wa_sort-group = 'UL'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
wa_sort-fieldname = 'WRBTR'.
wa_sort-tabname = 'WT_OUTPUT'.
wa_sort-spos = '4'.
wa_sort-up = 'X'.
wa_sort-group = 'UL'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
I have put the wa_sort-Group = 'UL' but could not get the desired results.
What my need is that say for one company code there are five line items, and I need to sort the output by company code then after displaying the 5 line items, I need to display the subtotal of amount for that company code , then a blank line and then the data for the next company code should start.
Please suggest how this can be achieved.
regards,
Lalit

Light orange vertical lines after work area preview

Problem:
               I got this funny problem. When I render the work area I get some strange light orange lines when I playback the rendered video (see the attached image).
Things I tried:
               - Imported this video to an AVCHD 1080i sequence where I edited my full HD video before. After I rendere the work area, no lines everything is clear.
               - On the other hand, when I paste the full HD video on DV - PAL sequence and render it, I get same bloody light orange lines as mentioned above.
Video: Widescreen 16:9, 720h 576v, 25 frames, .mpg. (taken from DV camera before)
Sequence: DV - PAL Widescreen 16:9, 720h 576v, 25 frames
PC: Quad Core, ... enogh for this ****** video, have edited full HD on it without any problems...

No image seen in your post. I'll take a guess anyway. Nvidia card?
If so, go to the Nvidia Control Panel and set the 3D application setting to "Let the 3D application decide".
Jeff
EDIT: I see the images now. My fix should solve it.

Vertical lines after sleep, must reboot twice

When waking my iMac G4 (512 MB RAM, 1GHz, 10.3.9) from approximately 5 hours of sleep, I was greeted with not only a frozen screen, but one with thin vertical rainbow pinstripes and one thicker black horizontal line. Key strokes were unable to resolve the problem, and I was eventually forced to cut the power, wait a few moments, and restart.
Restarting was unsuccessful, and I got to a grey screen with barely noticeable grey vertical pinstripes, and was unable to proceed. Once again, I cut the power, restarted, and this time everything seemed fine. I checked permissions, and all seemed to be fine.
I booted from the TechTools CD, set the tests to run, and went to bed.
This morning, I checked the iMac, and found that it was asleep. When I tried to wake it up, I got another screen with the rainbow lines. The hard-drive did spin to indicate that it had woken up, but I couldn't get rid of the lines, and ended up having to cut the power once again.
I tried to reboot, and didn't get the standard chime, but instead a longer higher pitched tone and a blank screen (dark grey or black, it was hard to tell). The hard-drive was spinning, but once again I was stuck.
I was forced to cut power and reboot yet again, and this time the process went fine. I have now set the machine to not sleep (computer and display) and for the moment, things are okay.
I am now convinced that there is a problem, I'm just not sure what it is. Any and all suggestions are very much appreciated.

Hi Samantha,
Welcome to the discussions.
You need to differentiate whether this is a software issue or a hardware issue. One way to do this is to boot up using a different operating system (such as the one on your OS X installation disc). If the phenomenon disappears when you do this, then some setting within your normal OS is corrupted - that fastest fix for this is an "Archive and Install".
If it still persists, then you may have a hardware issue (most likely your graphics card). This is not good, as in an iMac, the graphics card is intergral with the motherboard - to replace the card, you need to replace the motherboard.
Let us know how you go, please.
Cheers!
Karl

20" iMac screen is gray with blue and gray vertical lines after restart

Hey, I have a 20" Intel iMac that I purchased about 2 years ago. I have had no problems with it at all until yesterday afternoon. I had just woken it from sleep (no problems at all with the screen), used it for 5 minutes to check email and then left for 10 minutes only to come back to this on the screen:
http://www.flickr.com/photos/47548003@N03/4357722284/
I have tried restarting with the same result each time. The computer starts up with a gray screen that fades around the edges to the picture shown above. I am still able to use the computer with an external monitor, so obviously just the screen seems to be affected. Any ideas about what could be wrong?

Welcome to Apple Discussions.
It looks like the graphics card may be failing. If you are covered by AppleCare contact Apple immediately, if you are not I would recommend bringing it into an Apple Authorized Service Provider to be checked out.
Sorry for being the bearer of bad news.
Roger

HP LaserJet MFP M276n prints vertical lines only

We are using this printer as a stand alone printer to copy bulletins for our church each Sunday. It has been printing fine BUT we moved it to another table in the office and it quit copying from the top side. I can run test prints fine from the memory of the machine but it will not copy anything...we get vertical lines up and down the page. What have I done to it!

Hi @jimrob65 ,
I see that you are having issues when copying, you are now getting vertical lines after moving the printer to another table in the office. I will do my best to assist you with this issue.
Most likely the printer is connected to a different power source since moving the printer, which can affect copying and scanning output.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Try another outlet.
I have provided this document for cleaning the scanner glass and the white plastic backing.
Troubleshoot Scan Quality Problems.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Smartwatch blue vertical line

Has anyone else experienced a blue vertical line after powering up the sony smartwatch? Evereytime i power it on, a blue visible line appears. I have talked with customer support and opened a service request #.

Unfortunately this is more likely a hardware issue with the display and as such I would advise returning it for assessment by an authorised repair agent.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advance

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?

Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU!

After updating to v. 6.X.X, vertical lines appear around the cursor when typing in webpages such as Gmail and Facebook that persist, obscuring text and other pixels in the webpage. Didn't happen before this update.

I noticed after updating to Firefox version 6.0.1 that vertical lines the same size and shape as the text cursor remain behind on the screen as the cursor moves (either while typing or by using arrow keys). This is most obvious and annoying in text-heavy applications such as when typing in Gmail, Facebook, and work webmail, for instance. (Interestingly, it's not happening now as I type this.)
This is very annoying because these lines obscure parts or even entire letters in words that have been typed. I thought that it might have been a Firefox customized 'skin' I added at the same time as updating, but I reverted to the default view and the problem remains.

I noticed after updating to Firefox version 6.0.1 that vertical lines the same size and shape as the text cursor remain behind on the screen as the cursor moves (either while typing or by using arrow keys). This is most obvious and annoying in text-heavy applications such as when typing in Gmail, Facebook, and work webmail, for instance. (Interestingly, it's not happening now as I type this.)
This is very annoying because these lines obscure parts or even entire letters in words that have been typed. I thought that it might have been a Firefox customized 'skin' I added at the same time as updating, but I reverted to the default view and the problem remains.

Inserting a new line after each tag of an xml

Hi,
I am having a requirement where i need to insert a newline after each tag<> of an xml. I am sending an xml to target system using JMS adapter and the target system has UNIX as OS.
In unix system if we see the output xml, it will be in a single string as shown
<?xml version="1.0" encoding="ISO-8859-1"?><messages><Field1\><Field2\>.........................</messages>
But the desired output should be in the below format
<?xml version="1.0" encoding="ISO-8859-1"?>
<messages>
<Field1\>
<Field2\>
</messages>
And there should not be any indentation for the xml. It should be in the above format it self.

Hi,
I believe this can be achieved through XSLT or JAVA Mapping.
Please refer to the following link:
XSLT Mapping:
Inserting a new line after each tag of an xml
JAVA Mapping:
In Java Mapping ,all you have to do is to make a code that does a search and replace.
Hope this helps,

Why would I get a bright green vertical line down the center of my screen after playing a game?

Why would I get a bright green vertical line down the middle of my screen after playing a game?

Hi @DustMidnight85
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with the display but if you adjust the position of the display it disappears.
Here is a link to Display Quality Issues that may help.
As you stated it goes away when you reposition the display the connection cable may have become loose or damaged from opening and closing the display.
Here is a link to the HP Pavilion 14 Notebook PC, HP Pavilion 14 Touchsmart Notebook PC, HP Pavilion 14 Touchsmart Ultrabo.... Chapter 4 page 36 has removal instructions that may assist you in checking for that problem.
If your notebook is in warranty or you would like help please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Acrobat 9 inserting vertical lines after Optimize - Deskew

Similar Messages

Maybe you are looking for