Acrobat 9 MAC, current scanner does not show up, only old ones

Old scanners are not in the Mac OS panel anymore, only in Acrobat. Current scanner shows up in the OS, but not in Acrobat. Strange...
I have uninstalled and reinstalled Acrobat, still only showing old scanners, not the current one.

Does your new scanner support TWAIN properly or does it use a custom driver? That's al lthat matters. Acrobat only uses TWAIN sources and the old scanners are still listed because their source info has been cached. I'm sure there is some .plist file somewhere that can be/ must be flushed to make them disappera and possibly also make Acro scan for devices anew... Anyway, ask in the Acro forum for specifics.
Mylenium

Similar Messages

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Brother DCP8080DN scanner does not show up in Image Capture's list of devic

Hi, I've been printing successfully to a Brother DCP-8080DN for a while now. I have the latest CUPS driver and recently installed the latest Twain driver from Brother. I can scan from the Brother Control Center utility but the printer scanner does not show up in Image Capture nor does it appear in the Print&Fax Print Queue (it's supposed to show up on the right side). Any idea how to get 10.6.6 to recognize the scanner? Rebooting didn't help.

I found the legacy twain_32.8ba however when I try to find the "into" location, and I typed it very carefully..there is no path to this location.
I can't understand why Adobe would do this to me. Do they expect me to go out and buy another scanner? I've written to Microtek. All previous versions of Elements I've had import from this scanner and I've installed the latest scanner software. It's horrible that I have to throw away the money I spent on this so-called upgrade and go back to a previous version. Who thinks up this stuff?
I hope other potential purchasers of 9 understand what they're getting into. I would also like to get rid of the bothersome "ID interface" at the beginning..I would like to get to Photoshop edit is quickly as possible but Adobe is putting me through some sort of merchandising of their "free" web space. I don't want it. I'm spending way to much time on this. - Larry

Mac Pro DVD player not showing picture, only audio

When playing a DVD, my DVD player on Mac Book Pro does not show the picture, you only hear the audio. Any ideas?

This started yesterday for me too--audio works fine, but picture is gone. I tried 4 different DVDs to be sure, and all of them have no picture. The screen is completely black. I guess it's time to go to the Genius Bar...

TS3276 Email does not show contents, only to and from.

Email does not show contents, only to and from up top. Just started doing this last week. Already deleted account and added it again still same problem.

Mac OS version?

Help? my passport for mac (western digital) does not show up on Lion desktop, shows up on older laptop

My new Passport for Mac portable hard drive does not show up on the desktop. when connected to another computer the icon shows up on the desktop. When i first connected it it asked do you want to connect to time machine? I said "later"or "no" because I wanted to research how to use it first. NOw it doesnt show up at all... except in the disk utility section. Please help. I am going on a trip and need to have the storage for films. THanks!

Do you see it in the sidebar of a Finder window, under "DEVICES"?

I registered Adobe Acrobat XI Pro but it does not show up as a registered product in my account.

I completed the registration page and got a "Your account will update in 30 minutes" prompt. That was two hours ago. The product does not show in my "Products" profile. What should I do?

Hey Jan Kovarik,
Could you please let me know how have you registered for Acrobat.
Hope to hear from you.
Regards,
Anubha

My scanner does not show up in the drop down list to get photos from scanner

Deleted scanner is listed and drop down list does not contain my new scanner?

Of course, we don't know what Adobe told you to do. It may well be a bug. Yesterday someone posted on another forum with a similar problem as it relates to PSEv.11.
http://www.elementsvillage.com/forums/showthread.php?t=80876
If you have not done so already, I would exhort you to go to the Canon web site to download the latest driver for your machine. The installation disk may have been produced prior to release of PSEv.12. Nothing to lose!

Current Computer does not show up

I bought Apple Care and One on One for my new computer and since the change to OS Yosemite, it does not recognize my computer. ARRRRRGGGGHHHH! How do I change that? Only my 2007 computer shows.

Winston Winston, I figured it out! I am so excited!
Thanks for all your help!
First I reset my photo stream.
I realized after going to my photo stream there were actually no pictures in it. I thought I had it all set up right but what I actually had was a file called photo stream in my documents I "sort of attached" that file to the actual photo stream, which at times showed photo's in the photo stream.
When I realized there was really no photos in the actual photo stream, through iCloud, I went to iCloud.com and looked up how to add photos to photo stream manually from my PC.
I am in the process of adding all my photo at the moment and I am so excited each time a new photo appears on my TV through Apple TV.
Thanks for your patience
DJ

Photoshop CS2, Mac version, filter does not show

Hello,
I m compiling Dissolve sample plugin for photoshop CS series.
I succeed to compile CS3 and CS4 version since there is a xcode project.
I can see the plugin in the filter menu after I launch photoshop.
It works perfectly.
BUT, as for the CS2 version, I succeeded to compile it by changing CS4 sample project... But I could not get it to show in the filter menu.
The sample project is codewarrior based, so i cannot use it.
I m using Mac OS 10.5 and xcode3.
Any sample project to compile CS2 filter around?
Thanks in advance

xcode produce only MachO binaries, and CS2 recognize only PEF
From AdobeSDK FAQ:
--- begin ---
3.1.4.7 I want to have one plug-in for CS1, CS2 and CS3
That is a tricky problem that we have not yet found a great solution to. The main problem is that CS1 only sees PEF, CS2 & CS3 see both PEF & Mach-O on PPC, and of course CS3 on Intel only sees Mach-O. The problem occurs when CS2 or CS3 see both the PEF and Mach-O versions and cant decide which to use. Since you can't even build for CS1 from Xcode I'd suggest you at least keep them as separate installs, even if they are shipped together. How you sell and support of course is up to you.
--- end ---
IMHO, there is error in doc -- CS2 can't see Mach-O version, only PEF (exactly as CS1) -- at least in my tests.

Student CC order pending for two days on Mac, but order does not show up on account.

I payed for a CC student account two days ago and have yet to have access to any of the applications. When I track the order using the order number it says the order is pending, but when I check my order history on my account no orders show up. What do I need to do? My credit card has not be charged, and the payment shows up as "pending" on my online bill pay. How long does this process usually take? Im really hoping to have access to these apps today/ I needed access yesterday. Thanks!
Peter

Hi pbquaule,
Please give me the order no. so that I can check the status.
You can even reach our chat support and know the Order status: http://helpx.adobe.com/x-productkb/global/service-b.html
Till the credit card is charged and the Order processed, it will not be reflected under your account.
Regards,
Rave

Win 7 64 bit, office 2010 64bit, acrobat 9.5.4 / pdfmaker does not show up in office apps

I do not get the Adobe add-in in any of the office apps, nor do I get the covert to pdf or combine pdf selections when I get the menu from using the right click on the file. I did used to get these options. I have done a repair, I have also tried the command solution, nothing seems to work. The add-in are not in the add-in menu in the office apps.

You won't - Office 2010 isn't supported by Acrobat 9 and never will be.
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

Scanner does not show up in PSE 9

I've used Photoshop Elements 5 for several years and my Microtek Scanner always appeared as a choice under the "import" menu. Now I spent money on this supposedly improved version of PSE, version 9, and there's NO TWAIN SCANNER. I have to scan through the scanner's software and then open in PSE 9. An extra step I've never had to take in Photoshop Elements or Photoshop before. This is an improvement? I've reloaded the latest version of the Microtek software. Still nothing under the pse9 import menu. Can this be fixed or is this a permanent "improvement" to PSE 9. I'm really put out by having to go through this extra work to get my new version to work as well as my old version. About ready to scrap 9 and count it as a loss and never buy another upgrade to this product. Adobe, why do you do this to me? What's the fix or is there one?

I found the legacy twain_32.8ba however when I try to find the "into" location, and I typed it very carefully..there is no path to this location.
I can't understand why Adobe would do this to me. Do they expect me to go out and buy another scanner? I've written to Microtek. All previous versions of Elements I've had import from this scanner and I've installed the latest scanner software. It's horrible that I have to throw away the money I spent on this so-called upgrade and go back to a previous version. Who thinks up this stuff?
I hope other potential purchasers of 9 understand what they're getting into. I would also like to get rid of the bothersome "ID interface" at the beginning..I would like to get to Photoshop edit is quickly as possible but Adobe is putting me through some sort of merchandising of their "free" web space. I don't want it. I'm spending way to much time on this. - Larry

Scanner does not show for scanning

My Printer is installed though when I try to scan a document ,I donot see scan when I open Printer to scan.

Hi @nray525,
Welcome to the HP Forums!
I understand that you cannot scan, and I am happy to help!
For further assistance, I will need to know:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Acrobat 9 MAC, current scanner does not show up, only old ones

Similar Messages

Maybe you are looking for