Acrobat 9 (Pro) and Acrobat X(10) in the same machine?

Hi,
Is it possible to install both Acrobat 9 and X (10) in the same machine?
I have 32-bit XP machine as well as Acrobat 9 licensed version installed in it. I would like to know if I install Acrobat X (10)'s Trial version from the internet, what would happen to my licensed version 9?
Thanks in Advance!

Adobe does not support installation of two different copies of Acrobat on the same machine.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 20 Sep 2011 10:45:29 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Acrobat 9 (Pro) and Acrobat X(10) in the same machine?
Acrobat 9 (Pro) and Acrobat X(10) in the same machine?
created by Atit Shah<http://forums.adobe.com/people/at0122> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3927669#3927669

Similar Messages

Ei just paid for Adobe Acrobat Pro and I can not download the program, verytime i go to down load it tells me it doesn't download in my language which is english?why is this program I ordered not letting me download

i just paid for Adobe Acrobat Pro and I can not download the program, every time i go to down load it tells me it doesn't download in my language which is English? why is this program I ordered not letting me download

http://www.howtogeek.com/120277/how-to-install-flash-on-the-nexus-7-and-other-jelly-bean-devices/
You do not need a Beta channel build of Firefox (which currently is 32.0b6) to use Flash as the issue was you needed Firefox 27.0 or newer to use the old Flash 11.1 plugin on Android '''4.4'''. after it came out on tablets/phones.
What Nexus 7 version do you have as there was a 2012 and a 2013 model. A easy way to tell if it is a 2013 is it has a camera on each '''back''' and front while 2012 only has one on front.
If it is the 2012 then it has a Nvidia Tegra 3 so the old Flash 11.1 Plugin is disabled.
For reading only as Bugzilla is not a discussion forum or for "me too" comments.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=968219 Bug 968219 - flash does not work on Nexus 7]
*[https://bugzilla.mozilla.org/show_bug.cgi?id=957694 Bug 957694 - Hang/deadlock with Flash on 4.4 on Tegra3]

Can I run 64 bit LabVIEW and 32 bit LabVIEW on the same machine?

If I have a 64 bit OS (Windows 7 64 bit or Server 2008 64 bit) can I install and run 32 and 64 bit LabVIEW on the same machine?
John

LabVIEW 64-Bit vs. 32-Bit Applications FAQ
Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
A. Yes.
The FAQ will likely answer other questions you have regarding the restrictions and issues you will have with having both versions and compiling in one vs the other.

Can I install Web Standard CS4 and Design Standard CS4 on the same machine?

Can I install Web Standard CS4 and Design Standard CS4 on the same machine? My company purchased me a copy of one, and I have a personal copy of the other. Wanted to make sure there wouldn't be any serial number problems in any case...thanks!

Yes, but do a custom install to choose the apps to install to avoid any possibility of conflicts.
Bob

Can Logic Pro and Logic Express coexist on the same computer?

Hi all,
I'm a fairly new user to logic. I started with Logic Express to test the water with it before committing to the Logic Pro. I decided I like it enough and have since purchased the Logic Pro upgrade.
My machine is a MacBook. This machine travels with me, so I am rather concerned about having to maintain a dongle when I am on the move.
Ideally, I would like to have both Logic Express and Logic Pro coexist on the same machine. That way, when I can reserve the use of Logic Pro for when I am in a stable environment but still be able to use Logic Express when moving around. Granted this would be with reduced functionality, but the peace of mind is worth that to me.
So does anyone here know if this is possible and can direct me to some instructions on how to accomplish this?
Thanks!!
Darth Vanva

I'd LOVE to be able to enable two simultaneous instances of Logic to accomplish what I want, but AFAIK that's an impossibility (unless a guru-whiz-type like Justin has some ideas on this...).
OK, here's the deal...
I have 6 gigs of RAM now. While using Logic I can access up to 3G for samples. If I could somehow run another copy of Logic on the same computer (acting solely as a host for additional plugs, not for sequencing) then I'd gladly buy 2 more gigs of RAM so that the second instance of Logic could address 3G more. I'd still have 2G left for system headroom.
And there would be an additional (if not hypothetical) benefit to doing this...
Right now I can run stand-alone instruments outside of Logic (accessed via IAC) in an effort to overcome the 3G limit. But take GPO for example: I can only run 1 instance of it. And, there is no provision for saving any edits or custom made instrument sets in the stand-alone version. So not only would I be limited to 8 individual instrument slots in the lone GPO player, I wouldn't be able to save any custom programming. So much for recall... And of course, EXS is not a stand-alone plug so there's no way I could use it outside of Logic.
BUT... if I had this second instance of Logic running and treating it as a plug-in host, I'd be able to run multiple copies of plugs (just like I'm used to) and never have to deal with any stand-alone players. And of course by saving its song file I thus save all of my custom programming.
So yeah, it would be fantastic if I could run a second instance of Logic on the same computer. Theoretically.
Message was edited by: iSchwartz

Runing BO 6.5 and Xi 3.0 on the same machine

I have installed 6.5 and Xi 3.0 on the same workstation. Both versions run fine when I run them one at a time (open one, work on it, then exit before starting the other).
However, when I run 6.5 and Xi 3.0 simultaneously, then the next time I try to run either of them, I receive a message asking me to install again.
Has anyone run into this?
Michael O

Hello Constantino,
Is there no way this will work? As I have several customers thinking about or planning an upgrade/migration to XI 3.0, running legacy and new software side-by-side on the same machine is a very important issue, especially as migrations are usually an incremental process, requiring both versions to co-exist for some time.
I have never had any problems running 5.x / 6.x and XI r2 on the same machine, even simultaneous, that's why I'm so surprised at the sudden change.
Any input would be welcome! Thank you!
Kind regards,
Kristof Speeckaert

Iweb 1.1.2 and iWeb 2.0 on the same machine?

Is it possible/safe to run both versions on the same machine? If so how does one do this? If this has already been covered, would someone be so kind as to point me the way?
I cannot trust 2.0 for serious work, but I think that it would be good to have it around in the event that the problems with it are every resolved. But I would like/need to continue to develop a website for a commercial interest and thus need to be working on the previous version.
So, I would appreciate very much if some of you wizards could tell me what is the most effective (and yes safe) way to be able to have both versions running on the same machine -- not at the same time of course.
thanks for your time!

I think I answered one of your posts on this subject in another topic regarding running both versions of iWeb on one computer.
I am doing it but I don't think its very wise unless you are real careful.
I don't publish "serious" websites to .Mac but I do use it for testing sites.
I have two old test sites on .Mac made in iWeb '06 and one made using iWeb '08.
I don't see why they would interfere with each other. They are in separate folders on your iDisk. Publishing to .Mac hasn't caused me any problems but then I really did not care if they got screwed up as I was only testing!
If you are working with more than one website you are better to save the domain.sites2 files in separate folders to make working on them and publishing to a folder easier and to publish each to a server with their own domain names.
The only problems I have had with converting old sites to iWeb '08 is with the page backgrounds and the navigation menu. I just quickly redid the backgrounds and that solved that. I'm not going to bother with the navigation issue because I have decide to rebuild my sites, one by one, in iWeb '08.
The transition from iWeb '06 to '08 was so horrendous for a lot of people that I just want to leave it in the past.
iWeb '08 is working fine for me. Its so easy and fast to use - what's the big deal about rebuilding a website when you get to incorporate the new features!
Message was edited by: Roddy

I want to run an NI GPIB card and a Keithly GPIB in the same machine.

I want to run a NI GPIB and a Keithly in the same machine for software development. Our labs use both types of card. Another employee tried to make it happen, but failed. I would like to use 1 machine due to software licensing issues.

Hi,
There shouldn't be any interaction between the two GPIB drivers. The NI interfaces will use NI-488.2, wil the Keithley interfaces will use their low-level device driver. Each driver will manage the their own hardware.
In LabVIEW, you will use the NI-488.2 Vis to communicate with the NI interface. The Keithley driver has to install their own driver interface VIs.
The only problem is you want to use VISA for both interfaces. I don't know if there is a Keithley implementation of VISA, but there can nly be one installed in the system. The NI_VISA driver will allow you to control the NI interface, but not the Keithley interface. You can still use the Keithley interface using the low-level driver.
Finally, here is a knowledge base I found that has
some information that may be useful to you Using a Keithley PC488 GPIB Interface with LabVIEW
Hope this helps.
DiegoF
National Instruments.

Could CrystalServer 2011 and CrystalReports 2011 exist on the same machine?

Dear all,
I got a pure Windows Server 2008R2 Virtual Machine, and I want to have Crystal Server 2011 & Crystal Reports 2011 on the same machine. I downloaded the trail version of Crystal Server 2011(SP02), and Crystal Reports 2011(SP02). So I tried to install Crystal Reports 2011, and then tried to setup Crystal Server 2011. It pops a runtime error message, and cannot be installed. I tried to remove "Microsoft Visual C++ 2005 redistributable", also did not work. Then I tried from the other hand, I first installed Crystal Server 2011. It was successful. But when I tried to install Crystal Reports 2011, it still pops the runtime error message and could not be installed. Could anyone help me one this?
I tried to download BI Edge 4.0 trial, and it could be installed on the one whcih Crystal Reports 2011 installed.
Could anyone help me?

Hello Dennis,
it's possible to run CrystalServer and CrystalReports on the same machine. Please make sure to use the same Version (SupportPack and Patch Level) of the two applications.
Regarding the runtime error during CrystalReports installation, do you have something more specific like an error message or screenshot?
Best regards,
Thomas Uhde

I started to install Acrobat Pro and I need to stop the installation.

I started to install Acrobat Pro on my Windows 7 machine and the download is stuck at 1% so I tried to cancel and the install window won't close.

Just try a separate download and then do the install. Also be sure you are logged in as the administrator and have anti-virus disabled.

How to open pdf in Acrobat Reader in Firefox window/Tab when both Acrobat Pro and Acrobat REader are

I would like to open pdf files in firefox using Adobe Acrobat Reader.
I have both Acrobat Pro or whatever its called and Acrobat Reader installed.
Presently going to firefox's tools, options, then selecting the file types option I cannot select any plugin to open my pdf's besides what's labeled as "adobe acrobat" but which executes an in-tab instance of Adobe Acrobat Pro, despite the ambiguous language on the plugin which I suspect stems from Adobe's evolving and confusing conventions regarding just what Adobe Reader, Adobe Acrobat, Adobe Acrobat Reader, and Adobe Acrobat Pro really is.
Anyways, how to make pdfs open in-tab instances of Adobe Acrobat Reader while I have both the Reader and the Pro installed?
Is there a sepperate plugin I need or something?
Any help is very Appreciated

eh,
The problem w/ acrobat is that it takes forever to load
I was going to just use reader to read documents, and acrobat to edit, so I could gut reader of all the plugins worthless for 99.9999 of pdfs I use and it'll load fast.
foxit is nice, but won't open in-browser despite their continuing claims of supporting this feature.
That's so bizarre that adobe won't allow you to choose which one you want to run. Its installed as sepperate programs on the uninstall list, on the "open with" context menu, and w/ file associations, so why would it not be possible to only open pdf links w/ one?
Maybe its time to abandon acrobat and just use reader. There's much cheaper programs w/ all the same functionality as acrobat, so I guess I'll move on to those.
If anyone else has suggestions feel free to make em.

Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

Welcome to Apple Support Communities
For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

Hi, Can i sync both my MacBook Pro and My Mac Book with the same iCloud, iPhone, iPad and all the rest?

Hi,
Can i sync my database both on my Macbook Pro and my Macbook? is it possible to work on both computers and share the same iCloud, iPhone, iPad etc?
thanks

@Zizooka : Your question is not very clear ... please re-phrase ... and iCloud is the concept where you share your data through ONLY one account on ALL your devices ...

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

Can i install final cut 4 and final cut 5 on the same machine ?

hi
i currently use fcp 5.14 on my g5 dual 2.3 (pci-x). i am starting to teach fcp at a college where they use fcp 4.5.
i know that i wont be able to prepare assignments for the students on fcp 5 'cause they wont be able to open them up on 4.5.
the system admin at the college gave me a copy of fcp 4 to install on my machine to sit next to my fcp 5.
my question is, can it be done ?
can 2 different versions of fcp exist on my machine without problems ?
do i need to install fcp 4 on a separate drive so it wont conflict with 5 ?
any thoughts on that ?
thank you very much..,
nir

It can be done with a dual boot setup. I'll not speak to whether it should be done, other than to say it works for us.
The text below was from this thread...
http://discussions.apple.com/thread.jspa?messageID=4417897&#4417897
"Have you considered running a dual boot system?
Might check this thread...
http://discussions.apple.com/thread.jspa?messageID=1255258&#1255258
We had to keep FCHD4.5 for awhile, so I archived 10.3.9, wiped the drive, partitioned it and re-installed 10.3.9 on one and 10.4 on another partition.
Then simply boot from different startup disk, depending on which OS you need to work on."<<
K
Message was edited by: Kevan D. Holdsworth
Message was edited by: Kevan D. Holdsworth

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Acrobat 9 (Pro) and Acrobat X(10) in the same machine?

Similar Messages

Maybe you are looking for