Acrobat - Conversion from higher to lower version - Problem & Bizhubs printing problem

My team developed a form using Acrobat 7.x that will be triggered from a portal - directly routed to a printer. (that is, a user can print the form directly to the printer just by clicking the form name - no need to open the form).
The form is getting printed in certain Laser Printers but its not printing in Bizhubs.
I suspect that the server that routes the form to printer doesnt have acrobat reader and uses Internet explorer as default application to open. I heard that IE is not much compatible with Acrobat 7.x.
So I tried to convert the form from Acrobat 7.X to Acrobat 6.X (using the Print option -> Adobe pdf)
The form gets converted to Acrobat 6.X but the form misses some properties.
That is, the form holds the Text boxes & text areas in it (in 7.X) when i converted to 6.X all these text boxes are no more.
Could any one please help me over come these problems?
1- Why a form that is routed thru server is getting printed in Laser Printers but not in Biz hubs. (Please note if i open the form in my machine and print directly to any printer it prints. It fails only when invoked thru portal - inturn thru server)
2- why conversion to lower version of pdf misses its properties.
Your timely help is much appreciated. Thank you so much in Adavance.
Thanks,
Aravind Srinivasan.

This is a good read for anyone attempting to convert a PDF to a Word document...
http://www.planetpdf.com/enterprise/article.asp?ContentID=PDF-to-Word_Conversion_-_Why_it_ is_so_hard_to_do&gid=7837&fa

Similar Messages

Import from higher to lower version is possible ?

Hi,
One of my production database is in 10.2.0.3 version and development is in 10.2.0.1 version?
I need to refresh dev database from prod. Export/import is possible in this scenario ?
Thanks,
Dasarath

Cj wrote:
Export/import is possible in this scenario ?
Yes. Its possible.
Use 9i exp/imp to do this.
ThanksWhy 9i ? :-) I believe this is misleading info :-)
You will need to use the lower database version executables (in this case 10.2.0.1) to perform the export and import.
How to Import to lower version database or run network export with exp/imp utilities (Doc ID 1065604.1)
Compatibility Matrix for Export And Import Between Different Oracle Versions [Video] (Doc ID 132904.1)
HTH
Srini

Importing from higher to lower version of oracle database

I have taken user backup from Oracle 9i database.
Now I want to import that user into Oracle 8i database.
Is there any method to do this?

Always use a version of the EXPORT utility that is equal to the lowest version of either the source or the target database.
I suggest you to read this:
Compatibility Matrix for Export & Import Between Different Oracle Versions
Doc ID: Note:132904.1
~ Madrid

SEARCH ARRAY AND COUNT TRANSITION FROM HIGH TO LOW

I have 4 dig inputs. I want to count the number of times each individual input transitions from high to low and display the count I attached the vi as v11. Thanks for any help.
Solved!
Go to Solution.
Attachments:
count.PNG ‏94 KB
9422_Digital_In_mod.vi ‏52 KB

Hello Jootbox,
Are you by any chance using a cDAQ 9181 chassis?
If you are it might be a good idea to use the 4 counters internally available on this chassis.
A simple example about counting edges can be found over here:
https://decibel.ni.com/content/docs/DOC-11412
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Upgrade from Elements 7 to Elements 11 poses printing problems

I upgraded from Elements 7 to Elements 11 and now when I print a photo using Elements 11 it is extremely dark (almost black). I am using an Epson R1900 Photo printer and the same settings for printing in both Elements 7 and 11 and can't figure out why the pictures are too dark in Elements 11. Can anyone help with this?

Thanks for the ideas:
Yes, printing in the OS Print program (Windows 8) does produce better
photos than directly through Elements 11. Also, printing from the Elements
Organizer produces the better photos I am looking for and can obtain from the
Editor in Elements 7. I still wonder why the Elements 11 Editor produces
almost black pictures? But at least I have some alternatives for printing
better photos after I have used the Editor and saved the corrected photo.
Corvettelarry.
In a message dated 1/14/2013 8:19:44 A.M. Eastern Standard Time,
[email protected] writes:
Re: Upgrade from Elements 7 to Elements 11 poses printing problems
created by andaleebfatima1
(http://forums.adobe.com/people/andaleebfatima1) in Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4991885#4991885)

Is there a way to download a text/imessage conversation from your iphone to your computer to print as a document?

is there a way to download a text/imessage conversation from your iphone to your computer to print as a document?

Yes. I do it regularly to archive my messages.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
I use PhoneView and save my texts as a nicely formatted PDF. But, there are other options.

Import Error - while trying higher to lower version

When I try to import dump from -
Version 10.2.0.1.0 to Version 10.1.0.2.0 ; i'm getting error as
==>
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
IMP-00000: Import terminated unsuccessfully
==>
pls suggest me how import the dumpt.
Subir

...then import with lower version againThe official way should be export with the lowest version of export utility, but import with the import utility in the same version of the target database (where you are importing).
Metalink note 132904.1
Nicolas.

Time Conversion from Local to UTC Help! - Daylight Savings Problem?

Hi,
I am trying to use the generic conversion of local time to UTC time. I thought I had everything working since I use the "Get Date/Time in Seconds" and then convert to "Seconds to Date/Time" witht the "to UTC" flag set true. Then I convert back to a timestamp.
I thought I had everything working until I hit Daylight Savings for the Pacific Standard Time. Now the Labview is off by 1 hour!
Is there an update to the Subvi's that do this? Is this a known error? Please help. Thank you!
Attachments:
test25_LocalToUTC_Time.vi ‏8 KB

Here is the path you are doing that is causing the logic to fall apart for you.
1. You are getting the current time. In your images, it is 12:41 pm PDT which is 7:41 pm GMT
2. You are asking for the date/time record (that cluster that breaks out everything) but are saying it is UTC, so you get a date/time record that 19:41 UTC (7:41 pm). And the DST flag is 0. (Because UTC doesn't observe daylight savings time.)
3. Now you are taking that date/time record and converting back to an actual date/time. You don't wire up the UTC flag so it defaults to false. Thus the date/time record is interpreted as local. That DST flag is still 0 in your cluster. So you are actually converting the time to 7:41 pm PST, which is actually 8:41 PDT. (+1 hour for spring forward based on the month/date info.)
4. You are displaying that time stamp in the indicator labelled "Current Date/Time (UTC)", but it is not truly UTC, it is actually the conversion of a local time from PST to PDT, and it is not even the current local time. It is actually a "local" time 8 hours into the future. If you put the carat into that indicator's display format, you'll see that the UTC time is in the future as well. You call it UTC, but you are displaying a future local time.
The inconsistent conversions from local to UTC, and not accounting for the change of the DST flag from daylight time to UTC are what is confusing you. You kind of get lucky during standard time because the DST flag is 0 for both local standard time and UTC. But the conversions are still wrong, but it is a case of two wrongs are making it look right. Even in standard time your input timestamp and your output timestamp indicator don't match which you would see if you used an Equals? function on them.

Conversion from higher value to lower

Hi,
I have a variable of dec type length 17 which i need to copy in variable of type dec with length 16. Please let me know the shotest solution for the same.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:48 AM

I don't think you can use offsets with packed fields.
I would just check to make sure the amount in the source field is not too large for the destination and then if it's not, just do a MOVE.
Rob

Conversion from trial to subscription version

I purchased a subscription to Premire Pro but when I start the program keeps asking me if I want to continue with the trial version.
how do I convert the trial version to the one I purchased?

Hi Marcosibino,
Welcome to Adobe Forums.
When the trial box appears please click on license this software.
Enter your Adobe ID and Password to activate your Product.
Thanks

Just installed, speed from high to low?

So we just got ours installed a few hours ago, on first test download was 36mb/s and upload was 8mb/s.
Done a couple more tests and its now sitting on 2-3mb/s download and around 6mb/s upload.
Any idea when I can expect it to go back to my proper speed? The engineer who tested the line said it himself "you're looking at 40mb here".

Run the speedtest at http://speedtest.btwholesale.com/ and after the test choose ‘Further Diagnostics’ and post the speeds and the profiles that this gives.
Check for incoming telephone wiring to see if there are any junction boxes that come into the wiring before it reaches the master socket and that have extensions wired off them.
Slightly different advice from Devon_Dave's: Reboot the router/HomeHub each morning until things are stable.
We agree on: Do NOT touch the modem unless things go seriously wrong.

Version management - pretty printer problem.

I have got a change request to change program.
Around 20 developers changed this program. I have changed the program. BUT BY MISTAKE I HAVE PRESSED PRETTY PRINTER button.
AS a result ...later to while checking version managenment, my program won't show changes properly as you all know.
Please suggest me to avoid these pretty printer changes...
Please suggest me.

Hi,
in user settings you can specify 'ignore indenting' for split screen editor. This should enable version management.
Much better is a tool called Winmatch - don't know where to get; I use a version of winmat.exe from 1994.
Regards,
Clemens

High Res PDF 4 color process printing problems

I'm using CS4. Our printer asks for files to be submitted as a high res PDF. When we have files printed digitally, the graphics look great, no problems. When we have files printed on the 4 color press, we have problems...i.e., white dots in the color portion of our logo (which the printer told me was the result of a black screen over the logo)...btw, there is no black screen over the logo, so I don't know what he's talking about.
My point is...I don't think there is anything wrong with the graphics, but maybe I'm not saving the files correctly to send to the printer.
I know this is a question that has probably been asked and answered a hundred times, but what options do I need to select when saving as a high res pdf for 4 color process printing? Also, should those options be different if I'm having something printed digitally?
Thanks...

Exact settings depend on the printer. Most commercial printers these days prefer file transparencies intact. The best setting to use in that instance is PDF/X-4. PDF/X-3 and PDF/X/1a are other choices for commercial print, but both of these outputs flatten transparency.
It is interesting that you don't have problems with digital printing. A common issue is the "Yucky Discolored Box" syndrome. This can occur if you have a drop shadow over top of a vector color fill. When you have this there is raster information adjacent to vector information. Digital presses may treat the raster and vector differently, and sometimes there is an unwanted color shift in the printed result (it's not something you see on-screen).
But if you're having success with the digital printing I wouldn't worry about that at this point. If you need more specific input concerning your file, you might want to post the file or a screen shot so the regular posters here can get handle on the logo problem.
Regarding settings for digital printers, it's best if the printer suggests the settings. Some quick print RIPs prefer RGB input, in which case you would convert to RGB when you output the PDF.

Switched from Cox cable to Comcast and now printer problems

I would like to buy a new printer. Which printer is compatible with comcast? LIke I said, never had this problem before. It is wifi, and comcast should recognize it. It's not worth the time, considering how cheap printers are.

Unless you really want a new printer, you only need to set up your current one. You would still have to set up the new printer, just like you need to do with your current one.
You don't mention what kind of internet setup you have. That information would go a long way in helping us help you. What we need to know is what kind of modem/router setup do you have?

Peoplesoft Project migration from version(PT8.48) to lower version(PT8.45)

Hi all
I would like to know the migration of a project from higher version to lower version
for example PeopleTools 8.49 or 8.48 to PeopleTools 8.43 or 8.44 or 8.45
and the application HR 9.0 or8.9 to HR8.8
Any idea of this !
Look forward to here you.
Thank You.

jim.marion wrote:
I believe the ini file Nicolas is referring to exists when you export a project to file (I didn't see mention of exporting the project to a file in this thread).
If you export a project to a file, then you should be able to import it into another tools release. If you do this, just be sure the project does not contain any PeopleTools definitions.Yes, this is what I was refering to, copy project to a file, modify the .ini (at least that was required on old PT version) as I explained before importing into target. Note if I already tested many time to move project from lower to higher PT version with this methid I never tested it from higher to lower version.
Furthermore, need to be tested, validated, and I'm not really sure it is a supported way (modify PT release in .ini file) to copy project accross version.
Nicolas.

Acrobat - Conversion from higher to lower version - Problem & Bizhubs printing problem

Similar Messages

Maybe you are looking for