Acrobat crashed - can't enter Javascript code anymore!
I just had Acrobat (8.1.2) crash on me while I was working on the Javascript code I had in the file. When I opened the file after the crash, the javascript code was empty - everything had been obliterated in the code module. And even when I enter new code and close the editor, when I try to open it again, it's empty again.
I have Acrobat set to use an external app (I am using TextWrangler on a mac), so I don't know if that has any bearing on what happened, but the file now seems to be corrupted as any code I enter whether in an external app, or in the Acrobat javascript editor does not get saved. I tested the file on another computer, with the same results. Other files work properly on my computer.
Is there any way to recover the code from the file? I had spent several hours on several parts of the code, and am not looking forward to having to recreate my work.
Read "KT6-LSR and installing Windows on SATA" post (At this moment is the last in this page). There you'll find many posts about Raid problems. 8)
Similar Messages
-
HT1212 my i phone screen is broken and i can not enter my code
my i phone screen is broken and i can not enter my code but i need to sync my phone from my husbands computer so that i can save all my info before getting a new phone. is there a way i can enter or disable my password code so that i can sync my phone? if not is there any other way to sync my broken phone so that i dont loose everything?
Thank you for any help you can give!!i do sync it usualy but im on vacation, so i guess i may just loose those pics. one more question, can i have my screen repaired and then get the info off or is it to broken? the screen is cracked and has green and black stripes all over it.
Thanks again! -
I can't debug javascript code in JDeveloper 11
Hi all!
I'm trying to debug a javascript code in JDeveloper 11. I created a simple html page with a simple javascrit. The page and the call to javascript are ok. When I start the debug I receive some messages,please see below. I can see through window task manager that firefox is started, but it doesn't appear and therefore it is impossible to debug, The messages I receive in JDeveloper console are:
"C:\Arquivos de programas\Mozilla Firefox\firefox.exe" file:/C:/JDeveloper/mywork/js/js/public_html/test.html -oraclejsdebugport=2006
Waiting for debugger to attach on port 2006...
Debugger connected to local process.
Error: emItemsElement has no properties in file: file:///C:/Arquivos%20de%20programas/Mozilla%20Firefox/components/nsExtensionManager.js at line: 2621 and position: 0Debugger unable to connect to local process.Hi Roger,
It was a bug that got fixed recently. Please download the latest version and try. If you are still able to reproduce please let me know the build (Help -->> About).
Another workaround
unselect "Stop on Exception" it can be found from.
Project Properties >> Run/Debug/Profile >> Select JavaScript run configurations >> Edit >> select JavaScript >> unselect "Stop on Exception"
-Vikram -
IOS7 setup: Can't enter PIN code
I had a black-screen issue with my iPhone 4s, and had to reset it. After the reset was done, I got my phone to start up the setup-process (just like when you geet a brand new phone), but i accidently hit the pass button once the "enter SIM"-dialogue popped up. Now I can't enter the SIM's PIN code anywhere, and my phone is useless. I can't enter it on the phone, nor iTunes. What can I do?
I already tried the following:
Restarting the phone
Forcing restart by holding the 2 buttons
Restarting the process
Calling a number (I can't because the sim is not unlocked)
Ejecting the sim card
Connecting to iTunes (on 2 seperate computers)
Any ideas?These are your choices: 1. Get a new sim, without a sim pin; 2. Remove your sim, insert in another phone & remove the sim pin, then re-insert in your phone.
-
i am trying to sign up but getting a message saying "system error"
meaning i can not enter my printer codeHello hamutal,
Welcome to the HP Support Forums. I gather that you are unable to get to the HP Connected or HP ePrintCenter web site to enter the printer’s claim code.
HP Connected has only been rolled out to the USA, the UK, France and Germany. The link will use your computer to reflect your country and language settings, so if you live outside of the countries that have HP Connected you will get a server error message. If you live outside those countries, please try going to HP’s ePrintCenter web page. The link is https://www.eprintcenter.com.
You can reprint the web services information sheet with the claim code to reactivate it for another 24 hours. If you are unsure how to do this, I’ve included the Getting the Printer Claim Code document for reference.
If I have misunderstood, please let me know. In the next post, please also include the following information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer? whatsmyos.com
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
N8 - Can't enter security code when trying to unlo...
I can enter my PIN and security code just fine when I turn on the phone and when changing settings. But, when my phone is locked and I have to type security code in to unlock the phone, I can press buttons just fine, complete with haptic feedback and all, but nothing is actually entered into the security code field, rendering my phone useless even for emergency calls until I reboot it.
However, if I disable security code check when unlocking the phone (which means I don't have to enter the security code to unlock the phone), the home screen freezes when I unlock the phone. The screen changes the orientation correctly and I can use the hardware button to call up the task manager, but I cannot press any widgets or buttons on the home screen. If I press the hardware button, the menu won't appear, but I can still use the task manager to open up the menu to select applications and such. At this point the phone unfortunately pretty much craps up. The interface glitches out and the phone becomes unusable until rebooted.
This has actually happened before. The firmware had somehow managed to "downgrade" itself to an older version, so I managed to fix the problem by updating to the newest firmware again. It seems the same trick is not usable this time. The firmware version I have installed is 025.007.
Solved!
Go to Solution.I've managed to fix the problem.
I tried downloading an app from Nokia Store. The app happened to be a Qt application, which requested me to download and install one item with the actual application. After I installed the application the problem was fixed, although I doubt that was the reason it was fixed. -
Someone played with my ipod trying to guess my pass word and locked it up for 21,684,750 minutes how can I fix this so that I can enter my pass code in
Hi,
You will have to place your iPod in Recovery Mode and restore it via iTunes: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
when I try to connect my ipad to my itune account it does not allow me to do that. I've followed the instruction , but keep getting the same result " ITunes could not connect to the iPad because it's locked with a passcode. I have never connected this iPad to This computer.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Why does Acrobat Pro ask to enter license code on start up in adobe cloud?
Every time I want to run Adobe Acrobat Pro, it ask me to purchase or enter a license, even though it should be a part of the Creative Cloud.
What can I do?Hi RamusGus,
You can try these steps:-(You have Creative Cloud Team & the seat is assigned to you)
I suppose you have installed Creative Cloud Desktop App, or Latest Adobe Application Manager (http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773).
You can also try following steps:
Launch the product
On Trial Screen click on License this software
On Sign in Screen, click on “Not My Adobe ID” (if displayed), else click on signin (do this even if it shows a valid ID).
Sign in with your Adobe Id
Software should now be lincensed
Regards,
Rajshree -
How can I use Javascript code to affect the display of textField?
Hi All,
I created a web application using JSF.
And Placed two controls: one Text Field and one Label.
On the Javascript onclick event of Label, I wrote the following javascript:
document.getElementById("form1:textField1").value="test123";
I run the web application, and click on the label, However, the text of the Text Field does not change.
But the following code shows text of the Text Field has been changed. it works.
alert(ocument.getElementById("form1:textField1").value);
So, why the display of the Text Field does not change? How to update the display of the Text Field?
Any suggestion will be helpful!
Thank you.here is a full and correct example, enjoy
1. <html>
2. <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
3. <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
4. <f:view>
5. <head>
6. <title>
7. <h:outputText value="#{msgs.windowTitle}"/>
8. </title>
9. </head>
10. <body>
11. <h:form id="registerForm">
12. <table>
13. <tr>
14. <td>
15. <h:outputText value="#{msgs.namePrompt}"/>
16. </td>
17. <td>
18. <h:inputText/>
19. </td>
20. </tr>
21. <tr>
22. <td>
23. <h:outputText value="#{msgs.passwordPrompt}"/>
24. </td>
25. <td>
26. <h:inputSecret id="password"/>
27. </td>
28. </tr>
29. <tr>
30. <td>
31. <h:outputText value="#{msgs.confirmPasswordPrompt}"/>
32. </td>
33. <td>
34. <h:inputSecret id="passwordConfirm"/>
35. </td>
36. </tr>
37. </table>
38. <h:commandButton type="button" value="Submit Form"
39. onclick="checkPassword(this.form)"/>
40. </h:form>
41. </body>
42. <script type="text/javascript">
43. <!--
44. function checkPassword(form) {
45. var password = form["registerForm:password"].value;
46. var passwordConfirm = form["registerForm:passwordConfirm"].value;
47.
48. if(password == passwordConfirm)
49. form.submit();
50. else
51. alert("Password and password confirm fields don't match");
52. }
53. -->
54. </script>
55. </f:view>
56. </html> -
Can't save javascript code on WAD
Hi experts,
I used javascript object on WAD, but seems after I changed the java script code, it doesn't affected on server. because after the change, the source code shown the original code but not changed. does it caused by server cache or other something? Any input should be really appreciated.
Thanks,
DelveHi Delve,
At the end of the query/template execution URL add the query string "CACHE=" to see the new java script effects.
Imran... -
Help - I can't enter my password anymore in the device password screen on my Z10
Hope you can help. When I attempt to enter my password in the device screen nothing registers in the field. Also there is a box around the number 1. It feels as if the keyboard has been switched off / linked to some accessibility setting - but as I can't get a password entered I can't get into the device to do any further diagnostics.
Press and hold your power button until you see BlackBerry on the screen. Ignore anything you see before that and continue holding it until BlackBerry appears. Once your phone reboots, try once again to enter your password.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
I'm trying to activate my copy of Dreamweaver on my new i7 Snow Leopard mac laptop. Curiously, I'm not allowed to type letters in the activation code boxes... numbers only. I'm wondering of Dreamweaver CS3 is SL compatible. Any thoughts? Thanks so much.
well then, I can't activate it as part of the production suite. Thank you for that clarification. Now. I wonder why the activation code boxes won't allow letters to be typed. I hear an error sound with every letter, but numbers go in there just fine. Bob, I have the serial numbers and the activation code. I've been running the app for over a year just fine on my desktop. I've loaded it up on my new laptop, de-activated my desktop (now in another state) and am trying to activate the application on my laptop. The activation menu pull-down just doesn't allow me to type in the letters, only the numbers. Rather mystifying
-
Can i enter php code into html snippets?
I am an sql/php newbie ... and have my site hosted by a company which offers me sql and php hosting (unlike dotmac I understand) ...
I have created an sql database on their server and have written a page in html/php to display the results of a simple search ... can I insert this into iweb page using snippet - as I have tried and get a page cannot be displayed message where the snippet box would be on the webpage. (you can see this by clicking on the guestbook link on www.antandcleopuss.com)
I am wondering if iweb can insert php or if it is only html?
If iweb doesn't like php inserts then I will have to export my pages to a folder, then open them in a text editor to insert the php there?? (seems like an awfully long way round)
Any help gratefully received
antYou can add PHP code AFTER publishing the webpage.
Then change the extension to .php.
Here's a page the explains how to do it. It's not PHP specific but the routine is the same.
http://web.mac.com/wyodor/Ajax/
Of course you can add a PHP page to the HTML Snippet with an iframe. -
My Ipad is stuck in an "infinate loop" it goes from the "loading" (white apple) to the openning screen. I can slide to the passcode entery screen but it will not take the passcode. ( when I type it it does not recognize on the screen)
I suggest try getting it back to your stock iOS and forget about jailbreaking.
http://support.apple.com/kb/TS1538
Try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
I'm making an application form and prefer some of the fields to appear in all caps when a user types in information. Is there any way to make text fields font all caps? I looked under the font options but can only change the font, make things bold, i
-
I need to know what version of iOS my mac from 2008 supports
hello I am trying to update my iOS, the one I have is snow leopard on my macbook, but I dont know if theres a newer one that may mac can support
-
Selecting/Removing All Overprints in a Document
I work in the screenprinting field, and use Illustrator CS6 all day, every day to create layouts which are then separated into spot color separations. I found a script that I installed that is supposed to select all overprinted objects. When we blend
-
Hello, I updated the most recent CC 2014 apps available; Photoshop, Bridge, Illustrator and After Effect (This update was mostly centered on Camera Raw 8.7.1.). I was able to download an install the 4 updates in the regular fashion and the apps are w
-
No request generated for batch status active/ inactive settings
Dear Experts , When is make the status "active " for batch in IMG , Logistics general , Batch management , Specify Batch Level and Activate Status Management,Define Batch Status management , THE SYSTEM DOESNT ASK FOR A REQUEST . Plsease tell em if i