Acrobat did an update and now the interface is a bit different and I no longer have the ability to delete/insert pages. How do I regain this ability?

I need to delete and insert pages to PDFs. I seems to have lost this ability since the latest update. Can anyone help me?

Thanks for the reply. It helped me debug the situation, like I should have been able to do on my own (to my slight embarrassment). Somehow I must have downloaded the Acrobat Reader DC (don't know exactly what this is) and it became my default app for opening .pdf files. When I opened Adobe Acrobat and opened the file I wanted to modify within that everything is fine. Thanks!

Similar Messages

I just downloaded more themes from Apple for my iDVD. Now the iDVD will not run. How do I fix this?

I just downloaded more themes from Apple for my iDVD. Now the iDVD will not run. How do I fix this?

Where from Apple did you download them? What happens when you try to launch iDVD?
OT

HT4623 I tried to update my ipad but an error was received halfway through download and now the ipad is locked up. How do I fix this?

I was going to update my software for the IPad and I connected it to Itunes it synced up and brought up the ipad but didn't have the name, serial number or anything else but a question mark. After being synced and trying to doa software update of about 15-20 mins it suddenly brought up a dialog box and said it couldn't update the ipad until it was restored. I then hit the restore button and after a couple of minutes it didn't do anything and it disconnected me from itunes and now the only thing on the screen is the apple. I can not get it to do anything. I have tried to sync to itunes but nothing. If you push the button on the screen and the top button at the same time it will shut down. Can somebody please help me????

I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you.

I have Firefox 19.0 on Mac OS 10.6.3. It downloaded an update and threatens to install it next time I run Firefox. How do I prevent this? I don't want it.

I used "Show package contents" to open Firefox.app, and I see a Firefox icon named "updated". Can I just delete this, or will it also remove Firefox entirely? If so, can I get my old version of Firefox back? Until I can figure out how to not install this update, I won't restart Firefox. Thanks!

Sorry, I don't want it. I didn't ask for it to download, and I don't run programs I haven't chosen specifically to install. Is there a way to get my old Firefox back? If not, I won't be using Firefox anymore. Thanks!

After I import pictures, iPhoto no longer gives me the option to delete them. How can I fix this?

Normally when you're finished uploading a selection of pictures to iPhoto, a screen pops up asking if you want to delete the recent import of pictures [from the SD card] but my iPhoto is no longer asking me. How can I fix this? Or is there another way of deleting a selection of pictures from my SD card with out individually deleting them on my camera or formatting the SD card.
Thanks so much for your help!

Never let your computer erase data without you first checking that the data is safe. Specifically never use iPhoto (or any other app) to delete the photos from your Camera Card. Disconnect the camera, check the transfer has gone correctly and then use your Camera to Reformat the Card. This has three advantages:
1. You know your data is safe - because you've taken the time to check it.
2. Reformatting the card is much, much faster - takes a couple of seconds
3. Reformatting also refreshes the Directory Structure on the Card, helping prevent issues with the card and prolonging its life.

I upgrade firefox from 7 to 8 and now when i start firefox everytime it opens "getting start with firefox" page, in options i select the option 'show a blank page" how can i resolve this issue?

i upgrade firefox from version 7 to version 8, now when i start firefox everytime it open self the "getting start with firefox" website, in the options on firefox i select the 'show a blank page' but its not working. i am using firefox on windows XP- SP2.

Try restarting Firefox, the one time page(s) after starting a new release should disappear. Actually this last time with 8.0 they did not come up for me.
If that doesn't work then bring up '''about:config''' and place the url of the page into the filter. Right-click on anything that comes up and use "Reset".

Firefox 4 just updated and I no longer have a Home icon in my toolbars ( and none in the customize section ) . Help

update is missing a Home icon for the toolbars. Can I find this elsewhere ?
[email protected]

If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
Make sure that the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* http://kb.mozillazine.org/Corrupt_localstore.rdf

I'm trying to access my Army OWA using Firefox and a CAC reader but continue to get a blank page, how do I remedy this?

I can access AKO, but can not get to the Army's OWA at https://rw3.army.mil/Exchange/

Try:
* [/questions/752709] Having problems configuring FireFox to use a CAC reader

Hello, I just did an update and now the second Language - Hebrew - does not working. why?

Hello, I just did an update and now the second Language - Hebrew - does not working. why?

More information please.
If you are on adobe cloud, download indesign that support hebrew from CC desktop. Click on the preference gear on the top right then select App language.

TS1702 I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

Click the Bookmarks icon in the Safari toolbar.
On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
edit by cs

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT4623 I recently did an update and now my iPad is stuck showing the USB cord with an arrow pointing to the iTunes icon. It won't let me clear this screen. What do I do to fix it?

I recently did an update and now my iPad is stuck showing the cord with an arrow pointing to the iTunes icon. It won't let me clear this screen. What do I do to fix it?

Well, that illustration is suggesting you plug your iPad into iTunes (current version: 11.0.2).
Have you tried that?

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

I just did my update and now its telling me I have to restore my phone?? HELP

just did my update and now its telling me I have to restore my phone?? HELP

If iTunes is telling you that you need to restore your phone again, I would restore the phone again.
or, what exactly is indicating you need to restore?

When I updated Facebook 6.7.0, It didyn't complete the updating and my Facebook doesn't work so I deleted it. What can I do now to downgrade it ?

when I updated Facebook 6.7.0, It didyn't complete the updating and my Facebook doesn't work so I deleted it. What can I do now to downgrade it ?

If recovery mode did not work, try DFU mode, but don't use the latest backup to restore from after you have set it up "as new ipod" again.
DFU mode

Acrobat did an update and now the interface is a bit different and I no longer have the ability to delete/insert pages. How do I regain this ability?

Similar Messages

Maybe you are looking for