Acrobat Distiller prompting for administrator username & password

I have built 2 images on 10.6 with the acrobat 9 (patched with latest updates) and im getting problems with distiller launching under standard accounts. All apps a launched under admin and work fine. However users only have standard account privileges and acrobat application works fine but when i launch distiller (patched to latest update) it prompts the user for the administrator login details.
New mac book pro and mac mini
10.6 (fully patched)
acrobat 9 fully patched
works under administrator account
created a local standard account on machine and it has the same problem.
help!!!

extra info - all our users worked in locked down environment so they dont have admin rights. I believe when distiller starts one of its checks/processes needs admin rights to enable to it to start the application. This was checked under the console.app.
i have tried giveing the application full read/write access and permissions but this doesnt resolve issue.

Similar Messages

Prompted for sysman username/ password twice

hello. i've just installed gc 10.2.0.5. when logging on to the console, it prompts me for the username/password twice, even though the information was installed correctly the first time. has anyone seen this behavior, and if so, what is needed to resolve this . thanks

Hi,
* Does the second attempt allow you to login successfuly and Grid Control works?
* Also did you change the sysman password recently?
* Are there any errors logged in OMS_HOME/sysman/log which the first attempt fails?
* Is it a single OMS or multiple OMS with SLB setup.
Regards
Laiju

Prompt for a username/password while accessing a resource in wls 6.0

Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, Prabhat

WL 6.0 doesnot support URL based access control directly but you can read on
docs on these two links and
they helped me to restrict access to certain url's by prompting user for
username and password
http://e-docs.bea.com/wls/docs60/programming/webappdeployment.html
http://e-docs.bea.com/wls/docs60/adminguide/config_web_app.html
"Tom Mitchell" <[email protected]> wrote in message
news:[email protected]..
Prabhat,
You can restrict access to deployed resources by specifying the access
constraints in the deployment descriptors. For things without
deployment descriptors, you can use the console.
HTH.
prabhat wrote:
Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, Prabhat--
Tom Mitchell
[email protected]
Very Current Stoneham, MA Weather
http://www.tom.org

KB2986204 - After installing users being prompted for a username and password

After client machine have installed this update they are now being prompted for a Username and password when launching outlook. Setting up a fresh copy of outlook also prompts.
Is anyone else having this same issue?

For anyone still watching this issue, we're now up to 5 updates that cause this behaviour, we're having to block these on WSUS to prevent our customers being prompted for passwords on domain joined machines using NTLM.
KB2986204
KB2899504
KB2956087
KB2956170
KB2965270
Further progress since my last post in February. We upgraded to CU7 and now CU8 and the problem remains, but we think we have tracked the issue and have a case open with MS. If anyone else is able to test and confirm our findings it would be helpful to know,
below are the key aspects to look for:
- Outlook 2013 has one of the above updates installed.
- The UserPrincipalName ([email protected]) is different to the PrimarySMTPAddress ([email protected]) of the mailbox.
- The computer is domain joined.
- Mapi/HTTP is configured in the Exchange 2013 organisation.
- NTLM/Negotiate is used as the authentication mechanism.
If all of the above aspects are true for your configuration and you are able to re-produce the password prompting try altering the Mailbox PrimarySMTPAddress so that it's the same as the UserPrincipalName.
In our testing the issue went away when the UserPrincipalName and PrimarySMTPAddress matched, not that it gives us a solution as our customers are quite attached to their vanity email addresses, but it does highlight a specific type of behaviour under specific
circumstances.

Firefox no longer prompts for my username. What controls this?

I use firefox v32.0.3 on a Google Nexus 7.
I want it to prompt for my username when I connect to GMAIL/Contacts etc.
I goto settings=>privacy->clear private data.
It prompts for my username the 1st time, and then afterwards it just allows direct contact without prompting for username or password.
How do I disable this?
Thanks
Terry

Looks like you would need to manually sign out after every sign in to get the behavior you want. Google does not provide a "stay signed in" check box to Firefox for Android.
You can ask Google to better support Firefox for Android at https://productforums.google.com/forum/#!forum/gmail

Portal initial Administrator username/password

Hi friends,
I have installed SAP NW portal using rapid installer and want to login into it. What is the default portal administrator username/password?
In EP6SP2, username was sap*.
Regards,
Nilz

STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.

Preview and print a Crystal report prompted for the sa password

Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
Yuka

Hi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don

Repeatedly prompted for air play password?

At work I am repeatedly prompted to enter a password for Air Play though I've never even setup an Air Play password. This just started happening to me recently and is random.....some days it never pops up and days like today It's popped up multiple times. Very frustrating.

Hello leavitt050,
It may help to force close all open apps and reset your device.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still getting prompted for an AirPlay password, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Allen

Connect To Server Hangs Before Prompting For Name And Password

Hi Everyone.
Connect to Server hangs for 25 seconds before prompting for name and password.
I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
Example: smb://192.168.101.11/sharename
Once connected, browsing is fine - it's just the connecting that takes a long time.
I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
Again, once connected, browsing is fine - it's just the connecting that takes a long time.
Any help would be appreciated.
Damian

Something to add ...
Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately.

Preview a Crystal report prompted for the sa password

Dear All,
When our customer preview a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password.
Only two user computer have this problem.
How do I solve it?
Regards,
Karen

I install Crystal Reports Designing Software on those computers which canu2019t preview reports.
Then start the Crystal Reports design software to open the problem report.
It usually asks to enter the column on the interface u201COLE DB (ADO) u2013 Connect Informationu201D.
But it gets into the interface u201COLE DB (ADO) u2013 OLE DB Supplieru201D.
I correct the setup and save the report.
The problem is solved.
I try many methods, but only this one can solve my problem.
If you have another solution, please tell me, thanks!
Regards,
Karen

Building LabVIEW Executables That Prompt For Administrative Rights Under Vista

Hi Everyone,
I've discovered the hard way the differences between Vista and XP... I've got a compiled LabVIEW program that needs administrative privledges to run. However, when a user launches the program without proper rights under Vista, it doesn't prompt for administrative rights, it just runs and produces strange errors. Is there a way to make the program prompt the user for administrative rights so that they don't always have to right-click and select "Run as administrator"? I heard mention of a "manifest" file that can do this, but I haven't found any details.
Thanks!

I have no solution, but do you know why have to be an Admin to run your program? Do you write data to c:\program files? or any other 'forbidden' location?
Maybe rewriting your app is the best option?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

I have OS X 10.8.5 trying to upgrade. Have downloaded latest OS X Maverick but to install I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated.

My system is Mac HD OX S 10.8.5. I want to upgrade 10.9.1 and have downloaded it. However, to install it I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated?

If you have 10.8.5 you don't have a PowerPC Mac (PPC). PPC is for pre-2006 Macs. Go to Apple menu -> About This Mac to make sure you have an Intel Mac and that you didn't flip the 5 and 8 in your operating system indication. If you actually have 10.5.8 but you have Intel it gets a lot more complicated to install 10.9.
10.5.8 is the maximum for PowerPC.
10.6 can be upgraded on Intel with this tip:
https://discussions.apple.com/docs/DOC-2455
And it also help you get up to 10.6.6 or 10.6.8 as needed.
https://discussions.apple.com/docs/DOC-6271
will help someone with 10.5.8 determine if they are ready to jump to 10.7 or later.
If you have 10.8.5, you must install 10.9.0 first (free from the Mac App Store) to get to 10.9.1.
Backup your data:
https://discussions.apple.com/docs/DOC-1992
and check http://www.roaringapps.com/ and your printer, scanner, and peripheral drivers are compatible with third party vendors before upgrading to 10.9.

I keep getting prompted for my exchange password for my work email when I try to update

I keep getting prompted for my exchange password for my work email when I try to check/update for new emails. Any resolution other than "contact IT"?
Thanks

Enter the correct password in the account under Settings > Mail, Contacts, and Calendars.

HT1766 How can I make a NEW backup WITHOUT getting prompted for a (forgotten) password?

Hello! 1st post here,
How can I backup iPhone A to iTunes and then restore into iPhone B without getting prompted for a backup password that I do no know or remember ever setting?
To clarify, I am not trying to read an encrypted backup. I would like to make a NEW backup but I do not want it to be encrypted as I do not know nor remember how a password was set in the 1st place. If I unclick the encryption checkbox, I am prompted to enter the password. Defeats the purpose of clicking on the box, no?
Thanks,
Henry

Have you tried deleting the encrypted back up?

While installing new app prompting for Apple Id & Password

Hi,
Can someone help me out, I have created a new apple id and trying to install new apps(Games), it prompting for apple id & password. When I provide credentials pop up the following message "This Apple id hasn't used in iTunes store yet" .
What should I do now? Help is much appreciated. Thanks.

There is no fee for creating an iTunes or App Store account. But, before you can download anything from the store, you need to associate your AppleID with a store account, which needs to include payment information. You are only charged anything if or when you download a for fee content item or app for the first time (re-downloads of purchased content other than audiobooks is free, as many times as you wish).
Your account will be active within moments of setting it up in iTunes, and it will work as long as your AppleID is valid (so indefinately - mine has been actice since the iTunes store first opened).
Just for clarity - an AppleID by itself is just an identifier and is used to create accounts (and subsequently log in and use) a number of Apple services. You use an AppleID to create accounts for the iTunes and App stores, for using these forums, as well as services like iCloud, iMessage and so forth. The AppleID is just the identification used to create the accounts, but the service accounts need to be created before they can be used. So you need to use your AppleID to create an iTunes store account before you can start downloading content from the store.

Acrobat Distiller prompting for administrator username & password

Similar Messages

Maybe you are looking for