Acrobat Distiller Watched Folder problem with OSX 10.9

Probably not Adobe's problem but anyone else getting this?
Just upgraded to Mavericks and now when I try to print to a watched folder from Quark it keeps wanting to save the postscript file onto the desktop rather than directly into the "In" folder of the Distiller watched folder. Got so used to just hitting command/alt/p and then return.
Have recreated the watched folder just in case.
Quark 8 (ok not officially supported for OSX 10.9) but this seems more of a directory issue.
Preference is set to create postscript for later distilling and use watched folder.
Acrobat/Distiller X 10.1.8.
Am going to post this on Quark and Apple sites.
Somebody's costing me an extra few keystrokes per job printed !!!
Cheers.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Folder problem with OSX 10.9.4

    Since updating to the latest version (OSX Mavericks 10.9.4), I am having a problem creating a new folder on my desktop. When I create a new folder, everything that is on my desktop is moved into that folder. I cannot move it out or empty the folder without deleting all of the desktop items.
    I am able to create empty folders elsewhere - Dropbox, for example.
    Would appreciate any suggestions!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Graphic problem with OSX Lion - freezing all windows

    I try to define my graphic problem with OSX Lion. Simply if you have set for example hot cornes and switch between desktop, all windows etc. the move of switchng windows i chopping and freezing. I dont idea why, but it hapennig since I installed Windows 7 via bootcamp. But the problem is still here after I remove Windows. Cleaning cash doesnt work. Can anybody help me please?

    No, it's not Lion. It may be something you installed. If you just bought it you could also take it back to the Apple Store and they may be able to help.

  • Having problems with OSX and mail with the servers?

    Having problems with OSX and the mail servers?  Seems to be happening more and more?

    Hello,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    You may have multiple entries.
    Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
    If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • Watched folder issue with Distiller 9.0 and the Network

    We found that the Distiller watched folders "In" and "Out" creates automatically to some other folders on the network. This is happened only when missing folders occurs in Distiller when network disconnects.
    We just wanted to know how to avoid of creating "In" and "Out" folder automatically when setting up watched folder in Distiller. We have to create the same folders manually in the watched folders assigned directory.
    I need to disable the option "In" and "Out" created automatically through watched folder to the assigned folder.
    For e.g. if I assigned the watched folders to the particular directory on the network, the distiller should not create these two folders automatically, I have to create the same folders ("In" and "Out") on the particular directory before assigning the watched folder.
    Is this work well? Please help me out to solve this issue.

    Questions for Michael:
    If as the OP says; They have no issue doing so with PC versions of Acrobat why would there be a Licensing Issue on the Mac Version?
    So long as each has their own copy of Distiller /Acrobat.
    Also, Why is there not site licenses or seat licenses for Acrobat?
    (Other products such as MS Office has such for all their products, and other companies do as well, Even Adobe has such for other products)
    For the OP:
    What type Network do you use? each of the Macs should most likely be setup to use the same Network as the PC if possibly.
    Is it possibly to link to the hot folder on the PC side (since once created from PC it doesn't disappear). As I understand it only in OSX.5.8 and X.6  support for PC networks are the most reliable.

  • Weird Distiller/ Watched folder issue

    I have encountered an issue in Acrobat Distiller that has me puzzled.
    If I drop a .ps file directly into Distiller, it distills and makes a good PDF file. If I put that same file in my watched folder, it fails every time with the following error:
    Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions:
    /CheckCompliance out of range
    I am not using PDFX4 as my settings file–I am using one of the defaults form Adobe: High Quality Print.
    I can literally take the file that fails from the out folder after failing and drop it in the Distiller window and it distills perfectly. The watched folder is on the Desktop of an Intel iMac, not on a network. Both the OS and all Adobe Creative Suite apps are running all of the latest updates.
    MacOS X 10.5.8
    Acrobat Distiller 9.2.0
    The Mac has been restarted, prefs trashed, the watched folder recreated, etc…
    Any ideas?

    It's a bug in Distiller.
    I entered the entire term in Google:
    Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions:
    /CheckCompliance out of range
    and found a forum with an excellent discussion:
    http://forums.adobe.com/thread/300660
    Darn it. Three hours lost, a good part of it on Adobe.com looking for a Distiller update (none) or trial (not for Macs). Glad I didn't waste time trying to uninstall and reinstall Distiller, which apparently doesn't delete prefs and other system files.

  • Acrobat Distiller Watched Folders

    I seem to be having an issue with watched folders and the .ps or .eps files I use. I create alot of ads, and use a watched folder to create the PDFs to send to clients. The PDF's always produce properly, and replace the old versionbut the .ps or .eps files never replace with the newest version.
    I may have up to 20 revisions made on 1 ad, but the .ps or .eps file will always be the original and the PDF will be current. Is there any way to have the watched folder replace the .ps or .eps files with the newest version?
    Thank You
    Jamahl Umar
    Adobe CS2, PowerMac G5, Mac OS 10.4.11

    Thank you for the response. I understand that you can have Distiller delete the eps or ps after processing, but that is not my problem.The problem I have is that I may modify the eps file multiple times, and Distiller will make the eps into a PDF and the old PDF in the watched folder will be replaced, but not the EPS. I want to have both EPS and PDF be the current file and not a current PDF and an EPS from 18 versions ago. Does that make sense? I appreciate any and all help.
    Thank You
    Jamahl Umar

  • 10.4 client problem with OSX Server 10.5.8

    I have an late 2009 X_server with OSX 10.5.8 running, have binding to AD and enabled system as OD master. I have added an ad user to an od group and set a prefernce in the DOC to add the Group folder to the doc.
    On my MBP mostly all goes well except for a question mark for ther group folder. But on an old G4 tower I'm testing with it just prompts me about not being assigned to a group and gives the option to apply settings. but the settinsg never take place. Has any had this problem before? Thanks in advance. Art

    I've got the Audiotron working again. I found some info on basically opening the entire share to guest access. Reference this thread: http://discussions.apple.com/thread.jspa?threadID=392697
    I tried changing "encrypt passwords" (global section) to "no" and that didn't help. Then I added this to the music share and everything works. Probably not the best security solution, but I'm behind a firewall.
    In /etc/smb.conf added for the music share:
    public = yes
    only guest = no
    writable = no
    printable = no
    (I still left "encrypt passwords = no" in the global section. I'm not sure if that made a difference or not.)

  • Mega problem with OSX - XP - VISTA sharing

    hello.
    first of all i want to say that i am not network-guru (so you could see some silly stuff here =) but also i am not /basic/ user (i know how to plug a cable properly =) and i was trying to google my problem for a few days and finally i will try to find help here...
    i have few machines with various operating systems;
    osx 10.5.4
    windows vista home premium
    windows vista ultimate
    windows xp sp2
    there are 10 machines and all of them share at least 1 directory or disk over the network. all windows are set up to map network drives (also one disk from osx) and osx is connecting to windows drives through standard smb:// protocol.
    now... i am aware of all the problems with sharing stuff between osx and win, especially in my case, so my first question would be:
    is there any GOOD tutorial how to set up such network properly??
    i have seen few of them but seems that there are problems occurring again (i guess mostly because of vistas :P)
    for example;
    i want one of my osx to share TWO DISKS and TWO FOLDERS.
    in osx preferences i set up everything correctly in sharing and users (btw, guest account is disabled on ALL machines!) but when i log in (from any machine) i can see ALL DISKS plus TWO SHARED FOLDERS plus MY USER'S FOLDER and everything is accessible and writable etc... after few restarts and trying to disable/enable file sharing, clearing caches and such stuff on osx, i tried to edit smb.conf from /etc and also from /var/db and by default option in [homes] part which says 'browseable' is set to NO... i tried to change 'read only = no' to YES and changed 'com.apple: show admin all volumes = yes' to NO and after that some strange happened... (i will not emphasize reboot points of ALL computers but it was done after each step =)
    xp machines could see TWO DISKS, ONE FOLDER, MY USER'S DIR
    vista machines could see TWO DISKS, ONE FOLDER (different than xp), MY USER'S DIR
    osx could see ALL DISKS, TWO FOLDERS, MY USER'S DIR
    EVERYTHING was writable.
    if i would click to browse one of those disks on osx i could see everything inside but if i go back to the root of that computer, disk would instantly DISAPPEAR and become unaccessible from that pc. same on others.
    now i left smb.conf files in default setting so everybody can see everything and everything is writable. =( after googling 'smb.conf' combinations i have seen that some people have completely different setups... how could i know which one is right for my osx?
    generally my second question is: WHAT SHOULD I DO TO MAKE EVERYTHING WORKS FINE?
    i hope you understood my problem because i am little bit lost in all this...
    in addition there are my smb.conf files
    /etc/smb.conf
    ; Configuration file for the Samba software suite.
    ; ============================================================================
    ; For the format of this file and comprehensive descriptions of all the
    ; configuration option, please refer to the man page for smb.conf(5).
    ; The following configuration should suit most systems for basic usage and
    ; initial testing. It gives all clients access to their home directories and
    ; allows access to all printers specified in /etc/printcap.
    ; BEGIN required configuration
    ; Parameters inside the required configuration block should not be altered.
    ; They may be changed at any time by upgrades or other automated processes.
    ; Site-specific customizations will only be preserved if they are done
    ; outside this block. If you choose to make customizations, it is your
    ; own responsibility to verify that they work correctly with the supported
    ; configuration tools.
    [global]
    debug pid = yes
    log level = 1
    server string = Mac OS X
    printcap name = cups
    printing = cups
    encrypt passwords = yes
    use spnego = yes
    passdb backend = odsam
    idmap domains = default
    idmap config default: default = yes
    idmap config default: backend = odsam
    idmap alloc backend = odsam
    idmap negative cache time = 5
    map to guest = Bad User
    guest account = nobody
    unix charset = UTF-8-MAC
    display charset = UTF-8-MAC
    dos charset = 437
    vfs objects = darwinacl,darwin_streams
    ; Don't become a master browser unless absolutely necessary.
    os level = 2
    domain master = no
    ; For performance reasons, set the transmit buffer size
    ; to the maximum and enable sendfile support.
    max xmit = 131072
    use sendfile = yes
    ; The darwin_streams module gives us named streams support.
    stream support = yes
    ea support = yes
    ; Enable locking coherency with AFP.
    darwin_streams:brlm = yes
    ; Core files are invariably disabled system-wide, but attempting to
    ; dump core will trigger a crash report, so we still want to try.
    enable core files = yes
    ; Configure usershares for use by the synchronize-shares tool.
    usershare max shares = 1000
    usershare path = /var/samba/shares
    usershare owner only = no
    usershare allow guests = yes
    usershare allow full config = yes
    ; Filter inaccessible shares from the browse list.
    com.apple:filter shares by access = yes
    ; Check in with PAM to enforce SACL access policy.
    obey pam restrictions = yes
    ; Make sure that we resolve unqualified names as NetBIOS before DNS.
    name resolve order = lmhosts wins bcast host
    ; Pull in system-wide preference settings. These are managed by
    ; synchronize-preferences tool.
    include = /var/db/smb.conf
    [printers]
    comment = All Printers
    path = /tmp
    printable = yes
    guest ok = no
    create mode = 0700
    writeable = no
    browseable = no
    ; Site-specific parameters can be added below this comment.
    ; END required configuration.
    /var/db/smb.conf
    # Configuration options for smbd(8), nmbd(8) and winbindd(8).
    # This file is automatically generated, DO NOT EDIT!
    # Defaults signature: a13310200e774008e7f854700000293c480000
    # Preferences signature: 200e4bd28a0b1e026490000552000000
    # Configuration rules: $Id: rules.cpp 32909 2007-08-17 23:07:40Z jpeach $
    # Server role: Standalone
    # Guest access: never
    # NetBIOS browsing: not a master browser
    # Services required: org.samba.smbd org.samba.nmbd
    [global]
    security = USER
    auth methods = odsam
    netbios name = Azriel
    workgroup = group
    dos charset = 437
    server string = Azriel
    ntlm auth = yes
    lanman auth = no
    max smbd processes = 10
    log level = 1
    use kerberos keytab = yes
    com.apple: lkdc realm = LKDC:SHA1.5587265F45481D473800CE75CE481F5A07475F59
    realm = LKDC:SHA1.5587265F45481D473800CE75CE481F5A07475F59
    map to guest = Never
    domain master = no
    preferred master = no
    enable disk services = yes
    enable print services = no
    wins support = no
    [homes]
    comment = User Home Directories
    browseable = no
    read only = no
    create mode = 0750
    guest ok = no
    com.apple: show admin all volumes = yes
    [global]
    thanks for ANY help!

    somebody? something? anyhing? please! =)

  • Adobe Acrobat Distiller Process. Issue with Font(L0420P not found, using courier)

    Hi Everybody,
    We are working for upgrade activities, which involves moving applications from Windows 2000 to Windows 2003 Servers.
    My applications uses Adobe Acrobat distiller, which is also getting upgraded along with the server from Adobe 4.0 to 5.0 (Installed licensed Adobe distiller).
    I have been using Adobe distiller to convert .PS files into .PDF files. The conversion process requires the PSFonts such as (MB006, L0B, L0420P etc..), each font got a separate PFB and PFM extension files, which are kept in the folder name called "Psfonts" and has been included in "Font location" under Distiller settings.
    Using Distiller( Adobe Acrobat distiller 4.0 ) in Windows 2000 didn't create any issues or error while converting .PS files into .PDF files, all the PDF files are generated by Distiller as expected and process without any Font issues.
    In Windows Server 2003, I installed Adobe Acrobat distiller 5.0 and moved the Font Folder "Psfonts" from older server(Windows 2000 server) to the new server(Windows 2003) and started Adobe Acrobat distiller process(5.0) to convert .PS to .PDF, most of the .PS files gets converted into .PDF files but when .PS files which require the Font L0420P comes in for Distilling, it displays an error message as "L0420P not found, using courier".
    I checked with the old Server's (Windows 2000) font folder (Psfonts), it has the same files(PFB and PFM) as present in the new Server(Windows 2003).
    I tried to check the Particular Font name(L0420P) in Distiller-->Setting-->Job options-->Font-->Embedding-->Psfonts, but L0420P font alone is missing in the List.
    Could you please help in resolving this Font issue.

    You may like to try deleting the PsFonts entry from distiller and closing it. Restart the machine, make the entry of PSFonts agina and try creating PDF.

  • Adobe CS6, Acrobat, Distiller & Print settings OK with Yosemite?

    Has anyone with CS6 using InDesign and Acrobat software upgraded to Yosemite? Were print settings affected? Distiller functioning properly? InDesign, Photoshop, Illustrator OK? Thanks!!!@

    First you appear to be position in the forum. This forum is for Acrobat Distiller Server, not Acrobat Distiller on a Server. This is not a minor difference. Acrobat Distiller questions are handled in the Acrobat Windows or Acrobat Mac forum. Secondly, and more importantly, it is against the Acrobat license to use Acrobat and/or Distiller on a Server for the use of more than one person. The reason for this is that Adobe wishes to sell you products like Acrobat Distiller Server (now part of the LiveCycle Suite of products).
    Alas, I cannot help you with the problem you are having since I have never heard of the font that is causing you an issue. Perhaps it was a font installed on a printer attached to your old computer/server.

  • Configuring Watch Folder Problem - LiveCycle Reader Extensions ES

    Hi all,
    I am totally new to this process.
    We bought the LiveCycle licensed version 8.2 installed in Linux machine.
    LiveCycle PDF Generator ES and LiveCycle Reader Extension ES alone.
    The person who installed was resigned from service, so this task has came to me.
    I have just two question to all of them:
    1. Configure the LiveCycle Reader Extension ES.
    2. Create Watch folder concents for comment enabling purpose.
    I have created an watch folder using the Services-->Applications and services-->Archive Management-->Samples - Reader Extensions - ReviewAndCommenting 1.0--> Configure.
    The the configuring ReviewAndCommenting, "Security" tab "INVOKE_PERM" --> "allows Invocation of all operations on the Service", was checked.
    Setting-->Trust Store Management-->Local Credentials-->update Credentials--> Reader Extensions Credential
    Setting-->Trust Store Management-->Certificates-->update Ccertificate-->Trust for Certify Signature Trust for Certificate Authentication Trust for Signature Trust for SSL connections Trust for OCSP Server Trust for Identity
    Watch folders directory were properly created, when I place a pdf "INPUT" folder its immediately go to failure and .log file was generated.
    <----------------------------------------------------------------------------------------- ----->
    ailure Time----Thu May 20 10:57:40 IST 2010
    source location ---- Reason of failure is-----Invocation error.
    Invocation error.
    ALC-RES-001-002: No credential found with alias [SampleReaderExtensionsCredential].
    ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error.
        at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:152)
        at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
        at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
        at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
        at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:342)
        at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequired(Ej bTransactionCMTAdapterBean.java:259)
        at sun.reflect.GeneratedMethodAccessor238.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    <----------------------------------------------------------------------------------------- ----->
    I am not able to trace the problem why!, can any one help me out of this problem.
    SHAJI

    how do you solve that case? I am also stuck in RES LCES 8.0 version with turnkey installation and took very long time processing. I can't download anyway.
    I am using
    Win XP sp 2
    RAM 3 G
    HD free space over 20 G
    LCES JBOss turnkey v8.0
    RES credential file with vaild till 2023
    Regards,
    Ei Wah

  • Hello! Recently encountered a problem with OSX start,  after an emergency shutdown macbook

    Hello! Recently encountered a problem after an emergency shutdown macbook (it was shut off due to low battery) and now I can not boot in OS X, the fact that I can't see what became of OSX, so as I have in parallel is Windows that is loaded instead of OS X (video here https://www.youtube.com/watch?v=2oSTZhaVy9g sorry for the quality, with YouTube's nothing you can do) When you select a disk partition with OSX in Windows, via Bootcamp the same. What could it be? Maybe there is a function of the last successful run? I have the opportunity to the entire disk with OS X, from file system to programs. Moreover, OS X has remained 1password. I would be very grateful for help, because the answer is never found. I have MBP 371 ll/a with OSX 10.9.5.

    Yes, I can see the partition with OS X and Windows, better watch the video, it demonstrates this point.

  • Problems with OSX ja Active Directory (urgent!)

    Hello, I'm newbie Mac user and I have a problem with integrating OSX to our company MS Active Directory. This MacBook Pro is a only Apple here, so this is quite difficult...
    So far I have made following things:
    - I made "Bind" succesfull (it pings from others computers and I can see it from AD tools)
    - to AD account I changed my profile to include home folder (\\Adserver\user.account$). When I log on to AD via PC, home folders etc. are done with Logon script (Logon.bat) and I can see those shared folder fine.
    - then I rebooted my Mac and on logon screen there is option Other --> there I input my AD username and password. After that OSX log in normally.
    - But on Dock there is no Home folder, there is only a big question mark (?) and it says "User X X network home folder" (or something like that). And there is nothing behind this ?-mark
    - I have checked from Gerberos that I have a valid ticket to AD-server
    I have also tried to map network folder (apple + K), but there will error message that "Server couldn't reach, because user name or password is wrong"
    I have spend a couple of days to solve this problem, but nothing seems to solve it. Could someone please help me? I really need those shared folders (yes, there are at leat two I need from AD), because on those folder are documents that I need daily at my work.
    thanks,
    -zooropa
    MacBook Pro   Mac OS X (10.4.5)  

    My admin username of Mac is "firstnamesurname" and AD account is "firtsname.surname". So the "dot" is only difference. Is that enough?
    I made binding with Mac admin account and after that I used "other" on login screen of OSX. As I wrote, I can login fine with AD username and password, but the problem is that I can't map home folders from Windows Server 2003.

Maybe you are looking for