Acrobat has frozen after entering formulas into a form.

i have a trial of acrobat pro dc. i am makig a fillable order form with formulas in it and have just entered the formulas. the whole form has now frozen and wont respond to anything! i don't want to kill it as isn't saved anywhere. is there any other option?

What part of the Acrobat SDK do you use?

Similar Messages

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

  • My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.

    My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.
    H

    I've had the same issue and despite clearing the PRAM and powering on and off repeatedly this is what has (at least temporarily) resolved my issue:
    I've done this 3 times and sometimes it works right off the jump other times I've had to wait a bit and try again or power off and try again, once the start up screen is frozen hit Command : Option : Shift : Esc and a window should pop up "You restarted because of a problem..." from there you can go to your desktop. I haven't found an actual resolution to fix the problem but this does get you into your computer.
    Hope this helps!

  • HT4623 my iphone 4 s has frozen after attemting to install ios7 what can I do?

    My iphone 4s has frozen after attemting to install ios 7

    Reset the device.
    If it does not boot up normally, put in DFU mode (google it) and restore via iTunes.

  • My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screem, what do I have to do to get it working again?

    My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screen, what do I have to do to get it working again?

    You need to start the latest version of itunes on your computer and connect your iPad in order to restore it.

  • Is it possible to place a formula into a form

    Is it possible to place a formula into a form?

    Why not? There seems to be a lot of requests/inquiries for this type of support? Not having this function is extremely limiting to us...to the point where we may have to abandon acrobat forms central all together and purchase a product which isn't limiting or misleading in their offered features.

  • 13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

    My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

    Boot the MBP with the OPTION key down.  If successful, you should see two HDD icons,  Select the recovery partition (on the right).
    From the 4 option menu select Disk Utility.
    Run Disk Utility>First Aid, Verify and Repair.
    If the disk cannot be repaired, it will have to be replaced.
    Ciao.

  • My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

    My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • Plus sign after entering information in PDF Form

    Good morning!
    I have a PDF form that I made. I'm relatively new at this. Actually this is my first form and my boss is now wanting me to turn more of our forms into fillable PDF's. Which is fine. It was easy to figure out but now I am running into a problem where a plus sign is poping up after entering information. She wants me to fix it but seeing as I am playing around making these it's a bit above my head. Do you know how to get rid of these plus signs? Do you know why this is happening? It only seems to be doing it in these fields as well.
    Thanks for the help! It's greatly appreciated.

    The "+" is used to indicate an text overflow condition or there is more formatted text than can be displayed. One gets rid of this by either making the font size smaller or the size of the text field larger.
    Acrobat does not have a dynamic field type or a field that reflows to match the entered text. LiveCycle has this type of form and PDF format but mobile devices cannot yet process LiveCycle created forms.

  • My phone has frozen after its battery was completely finished. what to do?

    my iphone 3gs was out of battery completely.
    when i tried to recharge it it didnt recharge and now it is completely frozen.
    what can i do?

    If the battery was discharged and that caused the phone to turn off, it may take up to 30 minutes or more for the phone to respond once it is plugged into the charger.
    I suggest using the charger that came with the phone and plug that into a known good wall outlet. Then wait 30 minutes. After thirty minutes, and with the phone still plugged into the charger reset your phone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the phone restart.
    If the phone restarts, leave it on the charger until it is fully charged.
    If the phone does not restart then check to make sure the lightning or dock connector port is free of any lint or other debris. You might also try a different cable and different charger. If none of these work its time to have you phone checked out by an Apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • HT201412 my ipad has frozen completely, plugged it into itunes on laptop, itunes doesnt recognise it

    ipad has completely frozen in the middle of using an app, plugged it into itunes on laptop it doesnt seem to be recognised, and clues

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • My mac has frozen after upgrading iphone to osx 6

    I successfully upgraded my iPhone 4; my wife logged onto her screen name to do the same with her 4; wiped out all her apps and the Mac can't be closed down...
    The only difference I can see between our screens is that hers has a Setup Assistant.  If I click that, the screen goes blank.

    While you are certainly entitled to your opinion, just be aware that after every iOS update there is a group of users that report faster than normal battery drain.
    The vast majority of battery issues are resolved by basic troubleshooting.
    Most iOS users never experience battery issues or any other issues for that matter after iOS updates.
    There is no battery issue to fix or any reason to believe that a fix for these mysterious battery issues will appear in the next iOS update.

  • I downloaded lion now my mac book pro has frozen can't get into my mac book, why?

    why can't I get into my mac book pro now thatI have installed Lion, just have a screen with my name in the middle with a nice picture of an eagle. I have had no trouble with my desktop, it loaded fine, don<><.

    Hi Donald.
    Okay, your problem is most probably due to automatic graphics switching. Since you can't login, the only way I see is by starting Lion in safe mode. You will be able to login. Then disable Automatic Graphics Switching in the Energy / Power settings of System Preferences. The exact name of the setting may differ depending on your MacBook and hardware.
    Regards.

  • Iphone has frozen after trying to down load ios7

    I tried to update my iphone 4s to ios7, then it said that i had to go on to itunes. I then went on to itunes to restore and update. It then said there was an error and the iphone froze while  was waiting it to up load and it has been this way since. can anyone help!. oh and not sure what operating systems it is.

    Try the steps in this article: http://support.apple.com/kb/HT1808

  • App has frozen after trying to download folio

    Hello all,
    I was contacted by a customer who has been trying to download one of our large folios (around 100MB in size and over 1200 "pages") for the past 3 days. It it a multi-folio app. Her app has since locked and she can no longer view previously downloaded folios. Internally, we have successfully downloaded the folio on iPads, iPhones, iPods and and an Android tablet without any issues. What course of action should she take to resolve this issue? She did not say what version of the iPad she is using but we did test it on an iPad 1 & 3 without any issues. It was created in V26. Any help and/or suggestions would be appreciated.
    Thank you,
    Terry

    I was able to solve this by fixing the certificates as described here;
    http://b.rthr.me/wp/?p=356
    It took a little toggling to get it set, but it worked.
    If you search there are several other options to fix this that are more common fixes. Search "app store blank screen fix"

Maybe you are looking for

  • Why com.sun.CORBA.ORBServerHost can not be cleared after the JVM is closed?

    run an application on a multiple IPs windows box. In order to initialize the ORB on the right IP, i set the com.sun.CORBA.ORBServerHost property at the app startup. If the right IP is set, then the software works fine as expected. Btut ionce the wron

  • Change directory path dynamically using UTL_FILE

    I have a directory TEST_DIR which points to /test/files/ CREATE OR REPLACE PROCEDURE file_exist (v_country in varchar2) is v_check_file_exist BOOLEAN; v_dir VARCHAR2 (256) := 'TEST_DIR'; begin UTL_FILE.fgetattr (V_DIR || V_COUNTRY,'file123' ||'.txt',

  • I trouble with listeners on a movieclip. does anybody can help me?

    I have been working with this for two days and i cant make it work.......I am going crazy.... Ok i have this code if someone can help... i will appreciate that A LOT. The thing is if i compile the program everything works well, if i upload it or test

  • Setting levels with insert effects

    My understanding is that when tracking in Logic Pro, you should aim for average levels of about -12 dBFS, with peaks around -6 dBFS. When I'm recording an electric guitar track via DI with no insert effects, this isn't hard to do: with the input gain

  • BI Report is showing two rows for a single record

    Dear Experts This is Raja I am Facing one issue in BI Report, I have created report based on a Infocube which is getting data from two DSO. one is Standard [ Billing Condition Data]and another one is ZDSO[Targets}. these two requests go in the Infocu