Acrobat not using default driver settings (HP4250n)

I have my HP4250n default driver settings set to "duplex," (per the advanced settings under Printers and Faxes) but when I go to print in Acrobat Pro 9, I have to manually set the duplex each time to get it to work.  I am using the HP PCL6 driver for Windows XP.
Does anyone know why only Acrobat fails to see the default settings?
Thanks, any help is appreciated.

Yes, i have struggled with this too.
I found that there are 2 places where you can set the standard settings for your printer. For some reason if only 1 is used, it wont work.
There is one at the general tab of your printer properties and one in the Advanced tab in the same printer properties.
When i make sure these 2 options have the same settings, it works for me.
Dont ask me why. Printer drivers work in mysterious ways if you ask me.

Similar Messages

  • Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

    Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

    Hello Rob,
    Welcome to the Apple Support Communities. You may have a contact that has a different ringtone assigned to it. Just navigate to the contact and see what ringtone is assigned to them.
    iPhone: Ringtones
    http://support.apple.com/kb/ta38610
    Setting Ringtones
    In addition to the default ringtone, you can assign individual ringtones to people in your contacts so that you can tell when a particular person calls.
    Alternatively you can reset all settings in Settings > General > Reset > Reset All Settings. This would put your iPhone at factory default on everything settings wise and it does not touch the data on the phone
    Regards,
    -Norm G.

  • Trying to sign in on itunes but keeps telling me id not used before review settings what can i do

    trying to sign in on itunes but keeps telling me id not used before review settings and accept cookies checked every thing still cant get on can anyone help thank you

    Try logging on to your accunt on a conoputer and then go to edit you account.  Make sure that you account details are correct and the then save.  It may be an Apple problems since some other have been have same or similar problem this morning.

  • I cannot load Maverick on my iMac HD.  It reports that my HD is used for Time Machine backups and will not load to that drive.  I do not use this drive for backups.  Help.

    I cannot load Maverick on my iMac HD.  It reports that my HD is used for Time Machine backups and will not load to that drive.  I do not use this drive for backups.  I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice.   Thanks.

    Welcome to Apple Support Communities
    You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
    To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
    Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

  • Skype not using default browser

    I recently uninstalled Skype to revert to an older version to get rid of the horrible "Skype Home" splash screen. While I found "Skype Home" useless and irritating, it was nothing compared to what I found out when I finished uninstalling.
    These days it's quite common that when you're uninstalling a program, a browser window is launched to take you to the program's website, usually to show you some generic "we're sorry to see you leave" message. That's fair enough. However, most programs have the common courtesy to respect the user's default program settings and personal preferences and launch his default browser. This doesn't seem to be the case with Skype, for after uninstalling Skype I was shocked to see an Internet Explorer window opening.
    Really, owned by Microsoft or no, there can be no excuse for such an insult to your customers, not to mention compromising their privacy and security by force-launching the unsafest and most disliked browser out there.
    I am expecting a formal apology. 

    Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Help me! can not using JDBC driver for MS SQL server

    I can test sucess in connection, but create EJB when have follow error.
    04/05/19 12:23:04 SQL error: No suitable driver
    04/05/19 12:23:10 Error creating table: No suitable driver
    500 Internal Server Error
    java.lang.NoClassDefFoundError: oracle/jbo/html/HtmlServices
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:182)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)

    HI All,
    I am using JDBC driver to pull data from MS SQL Server
    2000 for my application Liaison Content Exchange, and
    which only accepts JDBC drivers to talk to databases.
    I dowloaded the driver from Microsoft website, and had
    a successful installation.What do you call "a successful installation"? Where was the JAR file places?
    But the application ask me for Driver Name, Class, URL, Time out and Data Source.What application do you mean? Liaison Content Exchange? I'm not familiar with that product.
    By default no driver is available in the drop down combo box. After using
    "com.microsoft.jdbcx.sqlserver.SQLServerDataSource" as
    class and
    jdbc:microsoft:sqlserver://192.168.17.2:1433; as url,
    the application throw me a error which states "Unable
    to instantiate an instance of the application driver"Sounds like it could be one of several things:
    (1) The JDBC JAR is not in the CLASSPATH where Liaison Content Exchange expects to find it.
    (2) You need to do something else to tell Liaison Content Exchange more information to define the data source.
    (3) The URL might be incorrect. Only you can know if the IP address of the host is correct. You don't supply a database name - perhaps you should. Are you sure that 1433 is the correct port number? I know that's true for SQL Server 7.0, but I remember that the default was changed to something else for SQL Server 2000. Ask your database admin what port this listener is assigned to for SQL Server 2000.
    (4) You might want to append ";selectmethod=cursor" to the end of your URL. (See the docs for this.)
    (5) Make sure you can connect to the database with something other than Java (e.g., the M$ SQL Server client).
    . I am not able to trouble shoot this problem, any one
    pls help me ASAP at [email protected]
    Thx.Bad idea to post an e-mail address. You're not supposed to communicate outside the forum. it's against the guidelines for using the forum.

  • Functions are not using default and will not validate without direct input

    Hi. I am recreating all of our mappings (from 9.0 to 11g). And I am finding that any function that does not have a direct input for every input variable (rather than using the defaults as defined in the function) no longer will validate in OWB. It states that the input parameter is required but is not connected.
    I have worked around this so far by adding Constants to pass the default values. I tried setting the default value in the property inspector window for each specific input parameter and this did not work, I still get the same error.
    Is there a way to fix this? i am not happy with having to add all these constants, and I don't see why it is not using the defaults that are defined in the functions themselves. Any help is appreciated.
    Thanks,
    Kaisha

    By the way for anyone who is curious....
    The reason that the functions and sp's weren't working correctly was because I had movedthem into the new DB wrapped. I don't know why it caused this but when I did dbms_metadata and replaced them all unwrapped, and then reimported them into OWB all the mappings compiled.
    K

  • Bex Query Designer not using default browser

    hello all, i have disabled my Internet Explorer from being my default browser, however, when i use the Bex query designer and test, it initiates my Internet Explorer, and not my default Safari browser.
    does anyone know where this setting is made ?
    thanks
    g

    Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Can not use default screen saver with this version of Mac OS X

    Hello,
    I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
    Also, the flurry screen saver runs extremely slow.
    Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?

    The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).

  • Some font options not using default system language in font menus

    Font options for Helvetica and Helvetica Neue (e.g. bold, italic, light, etc.) do not use the default system language (English) in the system wide font panel, or in font options within individual applications. Any suggestions as to how to correct this?

    Roderick Ackermann1 wrote:
    Font options for Helvetica and Helvetica Neue (e.g. bold, italic, light, etc.) do not use the default system language (English) in the system wide font panel, or in font options within individual applications. Any suggestions as to how to correct this?
    Could you provide a screen shot of what you are seeing, either here or by email (tom at bluesky dot org)?

  • WSUS Repair: Can I not use a drive other than C:?

    I used the wizard to move the WSUS folders from the C: drive to the SBS2008's D: drive in order to recover C: drive disk space as so many others have had to do. Now ofcourse, the system says it no longer is installed as designed and updates to domain
    computers no longer works.
    There is a good TechNet article on how to "Repair Windows Server Update Services" but it assumes the WSUS directory must be created on C: which ofcourse is not what I want.
    I appreciate there are SQL issues involved here, but if I simply specify D: as the partition to create the WSUS directory, substitute D:\WSUS in the wsussetup.exe parameters (from the section in that article headed 'To manually recover Windows Server
    Update Services), will this work?
    Thanks in advance
    Jerome

    Hi Jerome,
    à
    if I simply specify D: as the partition to create the WSUS directory, substitute D:\WSUS in the wsussetup.exe parameters (from the section in that article headed 'To manually
    recover Windows Server Update Services), will this work?
    I suggest that you should follow the step “create a directory called WSUS on the C: partition” to
    repair WSUS as described in this TechNet article (Repair Windows Server Update Services). It will help us to avoid unexpected issues.
    à
    I used the wizard to move the WSUS folders from the C: drive to the SBS2008's D: drive in order to recover C: drive disk space as so many others have had to do.
    After repairing WSUS, please refer to following article and check if help you to
    move WSUS Content and Database Files to a Different Volume.
    How
    to Move WSUS Content and Database Files to a Different Volume
    Meanwhile, please refer to following article and check if help you to recover disk space on C drive.
    Recovering
    Disk Space on the C: Drive in Small Business Server 2008
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Can not use hard drive on pc now that i have on mac

    I got a new external hard drive to transfer files from one computer to another . once i did so , my macbook asked me if i wanted to back up my computer to the drive , i thought why not . so i did but now the hard drive is not even recodnise on any other computer . Do i have to restore the hard drive ?

    you can partition HALF the new HD in EXFAT for use between Mac and PC for read/write.
    A better option is buy a second HD and format it in EXFAT, you need 2 copies of your valuable data anyway. Data safeguarding is computer use #1 "law"
    things crash, hard drives crash, ......ALWAYS have 2 copies of important data.
    Most importantly know that 2 copies of your data is 1, and 1 is none
    Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a backup AND an archived copy

  • Specifying JRE version in webpage (not using default set in Plugin)

    Hiya,
    I'm trying to set it up so our app loads a specific version of JRE (1.4.2_12) even though v 1.5 is installed on the machine and set as the default in the plugin.
    Cant change the default from being v1.5 in the plugin as it is needed by other application on the system.
    Does anyone know how I can specify which version of the JRE is used if it's even possible.
    Thanks

    Sun has finally documented Family ClassID with a link at the bottom of the JRE 1.6 release notes.
    See this article:
    http://java.sun.com/javase/6/webnotes/family-clsid.html

  • Itunes 11.0.1 not using external drive

    Hi
    Hoping someone can help me out with what I am sure is a simple issue!
    I am running itunes 11.0.1 on my imac. I recently moved all of my music to an external NAS drive. My mac can see the nas drive an access it, and all the itunes musci without any problem
    Currently my itunes library points to a folder location on the MAC hard drive
    I have tried to update the folder location, using  Preference -> Advanced -> iTune Media folder location
    From the change option, I go and find the location of my music on the NAS drive and hit change
    At that point I was expecting my itunes library to refresh and to show me all the music on my NAS drive, but it does not, and when I exit itunes and restart it, the original media folder location is showing
    If I through "Finder" go and access my NAS drive, and go to the music and play a track, the music plays in itunes, and the track just played then is showing in my list of music in tunes
    I'm really lost whats going on, and hopefully someone can point me the error of my ways here!
    Appreciate in advance any help
    Thanks
    Gary

    This sounds like it might be a network problem.
    First, quit then relaunch iTunes and see if  that helps.
    Second shut down the computer and pier cycle the Internet router and power up the computer. Let us know how those steps work.

  • Safari does not using system proxy settings (charles web proxy)

    Using OSX 10.7.3 and Safari Version 5.1.3.
    I start Charles, the web debugging proxy. On start, Charles adjusts the proxy settings in the Network Panel of System Preferences as expected. But Safari does not / will not honor these settings.
    Has anyone else had this problem?
    J

    You have to apply the change before it takes effect.

Maybe you are looking for