Acrobat PDF plugin does not appear in Word 2013

After I installed Acrobat XI Pro, I do not see the Acrobat tab in the Word 2013 ribbon bar. If I use Word 2010, I do see the Acrobat tab. Is this a bug in Acrobat XI Pro that will be fixed for Word/Office 2013?

Ok, both of you have proven how "smart" you are but have failed to answer the -basis- of the question "will Adobe fix or make compatible Acrobat 11 so the PDFMaker add-in will work with Office 2013?". I had initially responded to kangfamily to provide more information and confirmation that the issue does exist and that the incompatibility is with both Acrobat 10 and 11, not just with 11. I offered that it is an incompatibility with Acrobat's PDFMaker add-in and Office 2013, not a setting or other issue in either product.
Obviously Acrobat 11 was released before Office 2013 so Office 2013 will not show in their help pages. The base, underlying question is to Adobe and that is "Is Adobe going to release a patch/update/upgrade (pick your prefered word) to Acrobat 11 that will make the PDFMaker add-in compatible with Office 2013? And if they are, should we expect to see it soon?" This question is the same as when Microsoft released Office 2010 and Adobe released Acrobat 10 with initial compatibility only with the 32 bit version of Office 2010 but subsequently released a patch to Acrobat 10 to make it compatible with the 64 bit version. On that basis, the question should also indicate there are still the 2 versions of Office 2013 (32 and 64 bit) as well. Since neither of you work for Adobe, I don't think either of you can answer that question.
PS: I am not hijacking this thread but clarifying what is occurring by providing more indepth information about the incompatibility and clarifying what the base question is.

Similar Messages

Adobe pdf printer does not appear

I downloaded Adobe Reader 9 to my HP laptop, but the Adobe pdf printer does not appear on the list of available printers. My HP says it has AMD Turion (tm) 64 Mobile Technology ML-34 and Windows XP (Version 2002, Service Pack 2). Can someone tell me how to get the Adobe pdf printer to appear in the list of available printers? Thanks. dmm

Reader is just for the reading pdf files. It does not create pdf files.
For that you need one of the commercial Acrobat products. If you only
need to create 5 or less pdfs, then you can use Acrobat.com.
Mike

BI Publisher Desktop 11.1.1.5 Does Not Appear In Word after install

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

Click to Call plugin does not appear

Dear all, Currently, I am trying to make use of the click to call which I just installed. I am running Windows 10 and using latest version of Chrome as browser. Although I installed click to call on my pc, the plugin does not appear in any menu. I also do not get the notice that a new extension is added. I already went to (Chrome) settings > extensions, settings > privacy > plug-ins etc. I do not get any sign of the click to call programm at all. Please could someone help me out? Thank you so much!

Hi Shangxin,
If you go throught my question again, I mentioned the contact detail for this person is present in the Outlook contacts.
That is I have saves this person's phone number in my outlook contacts.
Please let know if you have a solution for this issue.
Regards
Bejoy Thomas

After takimg the picture of my document and scanning into the adobe PDF it does not read clearly words are meshed together

after taking a picture of my document and scanning into the adobe PDF
it does not read clearly. words are meshed together

Hi melisaf76024648,
Can you please tell me what process you're using to create the PDF? Are you scanning directly from the scanner into Acrobat? Or, are you scanning the document, and then using Adobe PDF Pack to convert the scanned image to PDF? Or, some other method?
Please walk me through how you're creating the PDF, and we will have a better idea where things went awry.
Best,
Sara

Acrobat 9 Professional Does not Appear in the Programs list

One of our users does have Acrobat installed, and can open and use it. However, the shortcut that is in his start menu brings up the Installer. Acrobat does not appear in the installed prograns list in Programs and Features (WIN7). I don't see an Adobe group in the start menu, or when searching the task-bar. the Desktop shortcut links to the correct folder/acrobat.exe.
Any reason why this program would NOT show up as having been installed, when it very clearly IS installed and working correctly?
(Also, not sure if I'm in the right 'community', please redirect me if i'm in error.)
thanks everybody,

Hi Gabriel,
Please try repairing Acrobat from the 'Help' menu and check.
Also check if Acrobat has been updated to the latest patch i.e. v9.5.5
Regards,
Rave

Download of Acrobat Pro XI does not appear in my downloads, applications, or de

I completed my download of Acrobat Pro XI (MAC OS). It does not appear anywhere. It's not in my applications file, not in downloads, not on my desktop. So where would I have to hunt to find it?

If you used Safari, then go to Window>Downloads
In the Downloads window find the download you need and click on the Magnifying glass
It should take you to the location of the download.

Adobe Create pdf icon does not appear in Firefox 36.0.1

I am using Windows 10 TP and have used Adobe Acrobat XI with Firefox for months now and have been able to click on the Adobe Icon on the FIrefox toolbar to convert web pages into an Acrobat file. In the last couple of weeks this icon has disappered but the following items still exist:-
1. Under Options/Applications Portable Document Format (PDF) is still set to Use Adobe Acrobat (default)
2. In the list of Add-ons I still have an entry Adobe Acrobat 11.0.10.32. This is the Adobe PDF Plug-in for Firefoc and Netscape.
3. I have uninstalled ALL add-ons ansd re-installed but that does not resolve the problem
4. I have uninstalled Firefox and re-installed it again but that does not resolve the problem
Can you please offer any suggestions to resolve this problem?

I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.

ADOBE ACROBAT READER PLUGIN DOES NOT WORK

when I click on a pdf document, nothing but a white page shows up (I do have the correct Reader plugin and it appears enabled.)

I had the same problem after updating Firefox to version 4.0 and Acrobat Reader to Version X. For me (Win XP) what solve the problem was deleting the Acrobat Reader Plugin (nppdf32.dll) in the Firefox plugin folder (C:\Program Files\Mozilla Firefox\plugins). So now there is only one Acrobat Reader Plugin left namely the one in the Acrobat Reader plugin folder (C:\Program Files\Adobe\Reader 10.0\Reader\Browser).

My plugin does not appear on MacOS

I developped a plugin for adobe after effects 6.5 and 7.0.
I compiled and successfully runned it on windows XP.
I want to develop the Mac OS X version.
I use xCode 3, I changed the template of CS3 sdk to fit 6.5.
I succeded to compile... but I had the "main should return int" error.
i tried to change the entry point....
so i tried to change the name, add definitions in the PiPL....
#ifdef MSWindows
CodeWin32X86 {"entryPointFunc"},
#else
#ifdef AE_OS_MAC
CodeMachOPowerPC {0,0,"entryPointFunc"},
CodeMacIntel32 {0,0,"entryPointFunc"},
#else
/* [4] */
CodeCarbonPowerPC {
0,
0,
"entryPointFunc"
CodePowerPC {
0,
0,
"entryPointFunc"
#endif
#endif
But no way, my plugni will not appear in the effect windows...
My mac is an Intel Core Duo, with mac OS 10.5.2.
I hope some someone has a solution....

Modifying an obsolete SDK is not the way to go. Use the CS3 (8.0) SDK, which defines entry points for PPC and Intel macs.

Adobe icon for pdf download does not appear on a website w/ FF, but does w/ IE,AOL, Chrome. Why?

Have been accessing monthly statements for more than a year, by clicking on the adobe icon in the download statement column, most recently in mid September, 2010. On October 4 I attempted to access September's info and the icon did not appear. I went thru tech support for the site and it was suggested that it could be a flash problem. We tried several corrections, reloading Adobe flash, checking pop up blocker,etc. When Chrome was loaded and the icons appeared, it was determined that the problem was thru FF. I later tried successful access with IE and AOL.
Since I had been successful for so long thru FF, what might have caused FF to fail in this small but important function? Other than usual updates, nothing was done on my part that should have affected my FF browser.

Are you using the official Adobe website to download Flash?
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Toolbarbutton from plugin does not appear in Reader X

Hi
My company has developed a plugin for the Reader that adds a toolbarbutton to the reader.
The scenario is that we have a .Net winform that contains a browserobject. This browserobject navigates to a pdf.
It worked perfectly in Reader 9.
But when I start the application in Reader X the toolbarbutton doesn't appear in Reader X. No errors. It just doesn't show up.
Here is the code
bool MakeToolbar()
     //AVToolBar toolbar = AVAppGetToolBar(); This is the original code that works well in Reader 9
     AVToolBar toolbar = AVAppGetToolBarByName("File"); // I tried this
     if(toolbar)
          AVToolButton objButtonToAdd = AVToolBarGetButtonByName(toolbar, ASAtomFromString("SaveButton")); // Den må bare blive null indtil knappen er blevet tilføjet første gang
          if(!bButtonAdded)
               //AVAlertNote("Adding button"); This code is executed in Reader X as well
               AVCursor objButtonImg = (AVCursor)LoadBitmap(gHINSTANCE, MAKEINTRESOURCE(Save_BMP));
               AVToolButton objDiaformToolbarButton = cUI::CreateToolbarButton(SaveToolbarButtonExecProc, ComputeEnabledProc, "SaveButton", "Gem blanket", objButtonImg);
               AVToolButtonSetExternal(objDiaformToolbarButton, TOOLBUTTON_EXTERNAL | TOOLBUTTON_INTERNAL); // added | TOOLBUTTON_INTERNAL 02-03-2011 as a test
               AVToolBarAddButton(toolbar, objDiaformToolbarButton, false, NULL);
               bButtonAdded = true;
          AVToolBarUpdateButtonStates(toolbar);
     else
          AVAlertNote("Fejl");
     return true;
// Generates the toolbar
AVToolButton cUI::CreateToolbarButton(AVExecuteProc objToolbarButtonExec, AVComputeEnabledProc objToolbarButtonEnab, char* sToolbarButtonName, char* sToolbarButtonTooltip, AVCursor objButtonImg)
     AVToolButton objDiaformToolbarButton = NULL;
     objDiaformToolbarButton = AVToolButtonNew((ASAtom)sToolbarButtonName, objButtonImg, false, false);
     AVToolButtonSetHelpText(objDiaformToolbarButton, sToolbarButtonTooltip);
     AVToolButtonSetExecuteProc (objDiaformToolbarButton, objToolbarButtonExec, NULL);
     AVToolButtonSetComputeEnabledProc (objDiaformToolbarButton, objToolbarButtonEnab, NULL);
     return objDiaformToolbarButton;
I think I read something about you cannot add buttons to the default toolbar in Reader X programmatically. So I tried File and Rotate toolbar instead but to no avail.
Can someone explain why it doesn't work?
Best regards
Jan

Hi Irosenth
Thanks for the answer. I am not sure I understand your question though.
We have a collection of reader enabled pdfs that the user can open in a webbrowsercomponent in a .Net winform.
We used to (Reader 9.4 and before) replace the Readers "save pdf" button with our own "save pdf" button that
- saves the pdf
- exports its data as xml
- send a message to the .Net winform that the pdf has been saved.
We implemented our own save button and its functions using a plug-in.
Now I can't find our "save pdf" button in Reader X. That is my problem.
So I try to create a new toolbar and place our "save pdf" on this new toolbar as you adviced me.
I expect the toolbar to show up in the Tools pane in the webbrowser component in Reader X.
But it doesn't. There is no Tools pane when I open the PDF in the webbrowser.
(btw all the keyboard shortcuts we have created in the plugin (ie CTRL, ALT, L) works fine - so the plugin generally works).
When I couldn't find my toolbar with its button in the webrowser, I tried to open one of the reader enabled pdfs in the Reader X as a standalone application.
This was just as a test to see if it worked any different from the browser plugin. It is not part of our use case.
But I noticed that in the standalone Reader X I do have a Tools pane, and my new toolbar but no "save pdf" button.
This is how it looked with Reader 9.4 and before:
OK the red text in the screenshot is quite difficult to read. It says (from above)
"We have replaced the Readers save button with our own save button in the plugin.
This is the (selvcreated save) button I miss in Reader X"
"This is a Reader enabled PDF shown in a webbrowser component in a .Net Winform"
"The users only have the Reader, not Acrobat"
Best regards
Jan
Message was edited by: Dafolo_Jan

Export to Word, Text does not appear in Word document

I have created a document in Pages which needs a table as part of it. I need to convert it to Word for work but when I use the Export to Word function it creates the Word Doc file but the table is blank - no text in the table at all? (Other text outside of the table is created).
Apart from that the formatting is not as it should be and some text (outside of the table) is incorrectly placed on the Doc file.
My fall back up to now has been to export to pdf (which works perfectly) and email that, but that stops it being edited at work.
Where should I be looking to make sure the text in the table in pages is exported to the Word document?
Or amn I expecting too much?
I am using a retina iMac, Yosemite OSX. Thanks.

Pages v5 (any version) is none of the following:
Word clone
Predictable
Professional/business grade software
Complete
Entirely debugged
Thoroughly documented
Many have, and continue to report export problems with Pages v5. Since we cannot peer over your shoulder as you enter text in a table, or if you tried to make the table behave as if in MS Word, the best bet would be to drop Pages entirely and use MS Word in Office for Mac 2011 (update 14.4.7 or later). Then you will be able to stop gambling with document conversion, work in the native Word .docx format, and recover some lost productivity. Word, not Apple's Pages, is the corporate word processing standard — for a reason.

After installing Adobe Acrobat XI, PDMaker does not appear in Lotus Notes 9

Hi
We have installed Lotus Notes 9 onto our PC (Multi User Installed) followed by Adobe Acrobat XI Standard.
We are unable to get the PDFMaker on the Lotus Notes toolbar anymore.
We are running Windows 7 Pro 64 bits
Our system have got 8GB of Ram.
Onboard Graphic etc
Did anyone have got this similar experienced? If you got a solution, may I know how you go about resolving it?
Cheers.
Simon

First off, you posted in the wrong forum. This is the Adobe Reader forum, not the Acrobat forum...
Anyway: It seems that Lotus Notes 9 is not compatible with any version of the PDFMaker plugin. At least that's what I gather from this page: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

PDF file does not export correctly - words corrupt & images in half

I just exported a PDF to Word doc - words corrupt and images in half
How do I get file or document right to work with it?

We have this problem as well. Unfortunately after years of only supporting IE and finally rewriting our site to be standards compliant we are going to have to force users back to IE because of this issue. It's not feasible for us to walk users through changing the default viewer. The default should stay Adobe (if installed) until a more robust native version is available. I understand you want to promote free and open tools but if they don't work, it's just not good enough.

Acrobat PDF plugin does not appear in Word 2013

Similar Messages

Maybe you are looking for