Acrobat Pro 10.1.6 no longer recognizes my scanner
I updated my Macbook to Snow Leopard OS X 10.6.3 this week (I know, I took my time with this), and ever since, Acrobat Pro 10.1.6 no longer recognizes my scanner, a Canon MG2120 multifunction printer. What can I do to make it work?
Try loading the latest driver available from Canon: http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_in kjet_printers/pixma_mg2120#DriversAndSoftware
There seems to be one dated 7/27/12. You may also want to completely reload the MP Navigator software.
-David
Similar Messages
-
Acrobat Pro 9 and Leopard Won't Recognize Scanner
Hi, I'm new to this forum.
I am running OS 10.5.5 on an iMac (intel core duo processor), and using Acrobat Pro 9.0.0. I have an Epson 1640SU scanner, and it has worked fine through all of OS X including Tiger 10.4.11 and Acrobat Pro 9 on my PowerPC (G4 PowerMac). However, I cannot get it to recognize a scanner in Acrobat Pro. When I go to File, Create PDF, From Scanner I get the Acrobat Scan window but there are no scanners available (under Tiger with Acrobat Pro on the PowerMac G4 this window would then allow me to select my scanner). I downloaded the latest Epson drivers, and the scanner works fine with Adobe Photoshop CS3 (IN ROSETTA MODE). Epson had a note regarding CS3 which indicated to set it to operate in Rosetta mode (whatever that is) and the instructions to do so by checking a box in the Get Info command from the Application Finder window. Acrobat Pro does not have any option like that.
Anyhow, am I doing something wrong? Has anyone else run across this? Is there a solution which allows scanning direct from the Acrobat Pro application?
My current work around is to scan in CS3 or the Epson Scan application then to save the document and then to open in with Acrobat Pro and then to work on it.
Thanks for any ideas, information or assistance.
Barrythe check mark by the scanner in the system preferences indicates That the driver is active. you wan to uncheck all the scanner drivers except any associated with Epson.
what you do once you get into acrobat, is choose the scan device. which should show (choosing SANE). Now go to File menu and choose make PDF from Scanner. If everything is set you get a menu of whether you want front page only Both and so on there will also in acrobat 9 be some setting for Optical Character recognition and so on.
Then choose to start scan after setting everything. Now you will have to wait for the SANE Scanner menu to come up. choose whether color Greyscale or line art and set the slider for the desired DPI. now hit preview. let scanner scan item them you can click anywhere in the bounding box to make it disappear and you can choose the desired portion of document you wan to scan.
Ok and make sure you down only the versions of the components for the OSX version your using. each is written different according to the OS. -
Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working
Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
The scanner works great in the Canon scanner software and other devices but not Acrobat.
When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
I had a HP scanner before and all options where there and worked great.
Anyone know of any fixes for this?
CheersThe scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
There is the WIA Canoscan and a Canoscan 9000f listed and when you select either of these you get these messages.
also here is the twacker result with 2 entries -
Adobe Acrobat Pro X - Serial No. no longer valid
Have been using the Adobe Acrobat X Pro that came bundled with Creative Suite 6 for some time.
The Acrobat couldn't start and did a re-install. Now would accept the serial no. and report as invalid serial no.
Now, only option is to use as Trial Version and days left are reducing.
How to get the system to accept my serial no. again?
Thanks in advanceHi Adobe_Advocate,
Please follow the troubleshooting steps mentioned in the KB : http://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html -
Im trying to download acrobat pro - it is taking soo long
im struggling to download acrobat pro
Hi nonom86435037,
If you're still having trouble downloading Acrobat, please make sure that you're logged in as an administrator, and that antivirus software is temporarily disabled. Then, try downloading from this page: Download Acrobat products | Standard, Pro | XI, X.
Please let us know how it goes.
Best,
Sara -
Acrobat Pro X 64bit Updater doesn't recognize admin user as admin user
I've installed Adobe Acrobat Professional X (64 bit) on Window 7 (64 bit) today and need to update it to vs.10.1 so it can create pdf's from Microsoft Word 2010 (64 bit).
Choosing the update menu, I keep getting error message 1200, insisting the program needs Windows to run in admin mode - but I am logged in as admin! Is that an Adobe error, or a Windows error, or is the universe screwing with me?Different product (Adobe Encore) but I have found that for some operations just BEING Administrator is not enough, I have to right click the program icon and select Run as Administrator from the pop-up option list
-
Cannot copy acrobat pro 9 app folder to applications directory
have uninstalled acrobat pro 9 because of failure to recognize new scanner. Now cannot copy app folder from DVD into applications folder.
Hi Janice,
What version of Mac OS are you using?
Adobe does not recommend migrating the software from one disk to the other.
Please run the setup file for Acrobat and reinstall the software. You might want to delete the existing version of Acrobat installed before reinstalling it.
Regards,
Rave -
Outlook Quick Print no longer works with Acrobat Pro v11
Hi All,
Prior to installing Acrobat Pro v11 on a Remote Desktop Server (Windows Server 2008 R2 Standard) we were able to use the Quick Print function for attachments within Outlook (Microsoft Office 2010 32-bit), although the default printer was physical printer the application would always open with Acrobat Pro even after disabling it as a default application. Upon uninstalling Acrobat Pro v11 the issue no longer occurs and the quick print fuction has been restored to normal.
If there is a known technical solution it would be greatly appreciated.
Best regards,rgrosz789, thank you for your suggestion.
Your code worked but caused run time error at the following line as below.
Sub Test()
'Dim app As CAcroApp
Dim app As Object
Set app = CreateObject("AcroExch.App")
app.Show 'Raises run time error
End Sub
I finally uninstalled Acrobat Pro 9, reinstalled it, then, my original program worked fine.
Something must have gone wrong in Acrobat 9 :-) -
Adobe Acrobat Pro 8 and Windows XP SP3
Hi all;
My adobe Acrobat Pro 8 (last updated) no longer works well if I install
Windows XP PRO SP3 . In fact Adobe Acrobat works but is totally unable to recognize any printer and a pop windows invites me to install one . Really I have 5 printers configurerd on my computer.
If I uninstall SP3 and come back to SP2 the problem desappears .
A precizion, it does not happens on all my computers, only on my DEll D620 LAPTOP.
Happy to read any help !!!
Many Thanks !!!
[email protected]Hi Christian, so after installing SP3 you can go into your printers folder and see all your printers? Are these all "local" printers or "networked" printers?
Also, with SP3 installed, are you able to print from any other application (i.e. Notepad) to your printers?
J.R. -
Problems using Acrobat Pro to scan with 10.5.2 and HP7280
Hello,
I'm hoping someone can help me. I'm trying to use Acrobat Pro to create PDF via scan. The scanner I have is an HP Photosmart C7280 all in one. When I try to use it, it starts up HP Scan Pro and gives option is scan to Acrobat. Unfortunately, when I ask it to do so, it crashes Acrobat.
Any ideas on what to do to make this work?
ThanksBTW: whats with this Îικε stuff.
As for Adobe/HP.
They have had a long running feud of Sorts for years running.
there was a very long period that spanned several versions of Acrobat, and HP Print Driver Updates. where every time adobe issued an update for Acrobat. Hp had to turn around and issue an update to their print Drivers.
The controversy swilled around If a Pdf was printed through acrobat or Reader to an Hp Printer all you would se was a series of very fine line screwed sideways much like looking at a TV screen the Horizontal hold adjustment was out of whack.
I'm sure Aandi , and Mike as well as myself posting thousands of times over the years to use the work around of going to print menu advanced and choosing print as image. And if it cleared the problem, to get on the horn with HP and let them know their driver was broken.
HP would fix it it work for a month and Adobe would do another update, and the same thing would happen.
It would be like the joke about Peat and repeat sat on a fence. If Peat fell off who's left? Pete. Then you would say repeat. And the person telling everything would repeat until you caught on.
You would think that a Software That depending highly on how printers would print would actually have sample of printers from the printer vendors to test on.
I also find it strange you never hear of any other printers having as much problems with adobe products. -
Acrobat x pro doesn't recognize epson scanner
Acrobat x pro doesn't recognize my epson perfection 1670 scanner. Other applications recognize this scanner. What can I do?
All software and drivers are updated.
Acrobat x pro ver10.1.4
Mac os x 10.8.1, mountian lionTwain Sane can be downloaded HERE. Others have recommended it as well and it is a viable option if your scanner is no longer supported under Mountain Lion.
It is a bit of work to install and configure, but the developer says a preference pane is available and makes it a bit easier. Check out the site for instructions on how to install and configure it. -
MacBook Pro will no longer recognize new SSD via USB
I just received a brand-new 512 GB Samsung 840 Pro SSD from Newegg this morning.
I own a 15-inch MacBook Pro (Mid-2012) with 16 GB of RAM and a 2.3 GHz Core i7 running Mavericks (10.9.1).
Earlier today, I plugged in the SSD via a third-party USB-to-SATA adapter that I also purchased from Newegg at about the same time. The machine recognized the new drive, and I opened up Disk Utility to format the drive as Mac OS Extended (Journaled).
Once that finished, I used Carbon Copy Cloner to clone my existing HDD to the SSD. Before it began, the program asked me to create the Recovery HD, so I enabled that option. The rest of the process proceeded smoothly. I quit CCC, ejected the drive, and put it away for the rest of the workday.
When I arrived home tonight, I plugged the SSD back into the Mac in hopes of test-booting it externally. Unfortunately, the machine will no longer recognize that anything is plugged into the Mac. I find it highly unlikely that the USB adapter could be malfunctioning; I unboxed it this morning and it's been mere hours since the successful clone attempt. I also find it hard to believe that the SSD could be broken, either.
I tried to disable rEFIt and manually invoke the boot selection screen, but even when that happens, the drive fails to mount. For the same reason, I can't erase the drive to start over, either. I've tried both USB ports, as well as rebooting with the SSD connected and unconnected.
My research tells me that people often have problems trying to get SSDs to boot when they've been installed in the drive bay, but nothing I've seen suggests anyone's had a problem booting from the external SSD after a successful clone attempt. What am I missing?I'd start by resetting the SMC. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964
I have no experience with Samsung SSD's, but I've read a number of posts here of people having problems with some of them. That could be a possibility.
The other thing you could try at this point is to swap the drives. If it's cloned already and the drive is good, it should boot. That would indicate the enclosure failed after the copy. -
Macbook pro no longer recognizes external hard drive
Hi everyone,
My Macbook Pro (2013) running OS X 10.8.5 will no longer recognize my external hard drive.
The hard drive, a Maxtor OneTouch 4, is granted quite old (c. 5 years) but has been working fine with my Macbook pro since I bought it 2 years ago. It is too full to do time machine backups but I just need to get some files off of it. It doesn't appear in Finder or in Disk Utility when connected and turned on.
Since it's only stopped working recently I suspect some software update may have rendered it obsolete. I have also noticed some glitchiness with my USB ports, but some things work fine.
If anyone has any suggestions of what to try, I would really appreciate it! I really need to access those files.
Thanks very much in advance!Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao. -
I'd like to disable my expired trial for adobe acrobat pro XI because I can no longer view pdfs without getting a subscription
Un-install Adobe Acrobat and repair the installation of Adobe Reader.
-
I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?
Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao.
Maybe you are looking for
-
How to get mp3s to show in itunes list without adding file or folder
How do you get downloaded music into the same folder as the itunes library to show up without having to do add folder or file. It seems on the mac they show up but on Windows XP you have to do an individual add of each new folder. The itunes library
-
Loading Flash AS3/XML into Flex 3
I'm seriously at a loss. I'm loading a Flash AS3 SWF into Flex via SWFloader and it will not load the xml data the file normally loads. The Flash file is fairly basic and loads XML data from a local file. I've tried all sorts of scoping within the Fl
-
I'm wanting to link a .pdf into a Dreamweaver web page so that readers can view it online. Does anyone know how I can do this or if it's possible? Ideally, I would really like to publish a .pdf on my website so that when the page is visited it automa
-
I am using brand new blank CD's. The CD information is: CD-RW, 700 MB, 1X-4X, 80 MIN and they are made by the company "maxell" if that helps. There is also not even a "Burn CD" button on my iTunes, I have to right click it. I also have a PC and the l
-
ipod problems My ipod sounds as if it has interference when on docking station....3 other apple devices work with no such problems, i.e a nano. a classic and 2 separate iphones so the problem doesn't seem to be the docking station...I have been gi