Acrobat Pro 9 Extended Will Not Recognize My Dell 3115cn Scanner

I recently upgraded from Acrobat 8 running on 32-Bit Windows XP to Acrobat Pro 9 Extended running on 64-Bit Windows 7.  When I attempt to create a PDF document from my scanner, I get the "The Unit Chosen Is Not Supported" error Message.  There seems to be no easy soultion for this problem, and I can find no solutions on Dell's or Adobe's websites.  The same scanner used to work with the older version of Acrobat running on Windows XP.  Please help if you have a solution.

I respect that you are employed by MicroSoft, but the compatability center is not always accurate.  It indicated that Adobe Pro 8 was compatabile for both 32 bit and 63 bit - but it is not.  I have upgraded to Adobe Pro 9 Extended because Adobe says that this is compatable with 64 bit.  The Microsoft compatability center also says that v9 is compatable with 64 bit.  But it is Not.  I have upgraded Adobe to 9.3.0, and it is Still not working.  I now have $700 invested in Adobe software that is non-functional due to W7 64 bit.
So although users can check the compatability center - as I did prior to purchasing my new laptop - but it may not be accurate.
And yes, I have updated the compatability center to indicate that the information there is incorrect.
I have searched/googled everything that I can think of, and still nothing helps.  If you have a suggestion how to make this work, I am listening.

Similar Messages

  • Adobe Acrobat Pro Extended Will Not Install

    I have the Adobe Master Collection CS5 installed, but needed to use some Acrobat features which I understood were only available in the Pro Extended version, so am trying now to install Extended onto the PC.
    The installation however keeps stopping saying I "already have a more functional product installed" ... Acrobat on this PC is the Pro version, but is not Extended ... is there a way to get it to install without removing the current version and all its settings?

    Since you have CS5 master collection installed- it comes with Acrobat 9.3 and Acrobat Pro Extended,
    that you are trying to install is version no. 9.0. So when you launch the installer, you get the message that you have
    more recent product already installed.
    For installing Acrobat Pro Extended 9.0, you'll have to deactivate and uninstall Acrobat 9.3 and then install Acrobat Pro Extended.

  • Adobe acrobat pro 8 does not recognize scanner

    adobe acrobat pro 8 does not recognize scanner

    This question will probably get responses most quickly if posted in Adobe's own forums, since it's about an Adobe product and not the iMac itself.
    http://forums.adobe.com/community/acrobat
    Regards.

  • Adobe Acrobat Pro X will not open PDFs

    Hello,
    My Adobe Acrobat Pro X will not open PDFs.  This happens twice a month and is becoming extremely irritating.  I have tried uninstalling, reinstalling, repairing and a system restore.  What can I do to make this problem go away?
    Thank you.

    To check that it is an Acrobat problem, open Acrobat from the programs list and try to open a PDF from the file menu. I suspect this will work fine from what I read into your post. I suspect that somehow your OS is changing file associations. In that case, right click on a PDF and select Open With>Select Default Program and then select Acrobat. Be sure the check box for default program has been checked.

  • Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Please refer
    Doesn't launch after 30 days | Installed as part of a CS6 suite

  • HT201071 Help!  Mavericks will not recognize my Canon 8400 scanner--is there a workaround?

    Help!
    My Imac 10.9.1 will not recognize my canon8400 scanner!  Is there a work-around?  Canon no loger provides software or drivers for Mavericks.

    I was looking here to post my problem with the 7350 and lo and behold, someone else has the same problem. I have gone through a significant amount more trouble shooting than the original poster with no positive results. The printer worked fine until I upgraded from OS 10.3 to 10.4. Since then I have been unable to print at all. I tried to install the driver via the disk. I tried to download the updated drivers from the website. I have spoken with HP tech support ad nauseum about the issue without any luck. I downloaded the latest GIMP-print version, the driver was not in there. I downloaded GhostPrint and Foomatic, the driver finally appeared in a list as an available selection, but the printer came up with GenericClass:waiting for device. I have used the HP util to install. I have installed via the Printer Browser (printer is connected via USB, direct, no hub). I have gone into the advanced feature of the Printer Setup Utility and add the printer this way with the same results. The printer works on the PC machine that sits on the adjacent desk. I am at wits end! I am this close from going "Office Space" on this machine and buying something else!
    Any other thoughts would be greatly appreciated.
    Brian

  • Acrobat Pro 9 will not accept serial number

    When I install Acrobat Pro 9 on Windows 7 x64 I recieved the error message invalid serial number.  I have called  and verified that the number is valid.  This serial number is part of the CS 5 Design suite.  The application will install in the trail mode but will not license.  I have used the CD and downloaded the application from the adobe web site.

    How did you get the serial number for Acrobat 9 Pro?
    I bought Adobe Creative Suite 5 Design Premium student / teacher edition. I registered it using the coupon code and received one serial number, for the Design premium install. I have been struggling to obtain the serial number for Acrobat 9 Pro, see http://forums.adobe.com/thread/636246
    Where do you find this elusive Acrobat 9 Pro serial number?
    EDIT Forget all that...
    OK I have figured it all out.
    You buy Adobe Creative Suite 5 Design premium Student and Teacher edition.
    You go to the Order Fulfillment page http://www.adobe.com/uk/education/students/studentedition/order_fulfillment.html
    You click on "Get you serial number"
    (log in if you aren't already)
    You enter all the information and attach your student ID etc, selecting your product as the design premium, and you get a support request raised. Within a few days you get a serial number for CS5 Design Premium (mine took 7 minutes to get).
    But you need to repeat this process, entering all the same information, but choose Acrobat 9 Professional as the product. It then sends you a serial number on the second case you raised.
    By this time, I had installed Acrobat 9 Pro as a trial, so I entered the serial number in and it all worked, then I clicked on Help - Registration and it all went through okay.
    Yay!
    Message was edited by: confused one

  • Acrobat pro trial will not install in my vista, why? help!

    hi. i'm a vista user and downloaded acrobat trial pro 8.0 today to see if my company needs it, we already have another version in xp. trouble is the installation will not even start. i click the start icon, vista asks me to confirm adminstrator rights, i agree, and then: nothing! in task manager i see that acroPro80_efg.exe freezes at 1520 kt. will not budge. ever. i have a new laptop, 2x512 ram, 2ghz.
    tried turning off firewall, tried right clicking (...as adminstrator...): no success. i'm using wacom pen tablet. tried turning that off also, just a random thought. i've not had any problems installing any other programs. my system is clean from viruses and running otherwise perfectly.
    please help! i need this trial version to function asap: agreed on a dead line next week... i'm panicking!
    anyone smart there awake?
    -mar

    Unable to Change Windows Vista Read-Only Folder Attribute - Super User

  • Acrobat Pro XI Will Not Print Word Document with a Rotated Table

    I have a MS Word document that is mostly text, but include a table that has been rotated in a text box to fit on the page.  When I try to print to PDF using Acrobat Pro XI, the document crashes at the page the table is on.
    I have tried several attempts to print using the Acrobat Printer, convert to PDF feature and trying to print just the page alone.  Acrobat will simply not print word document with a rotated table.
    Any idea how to fix this?
    Word 2013, Windows 7, Acrobat Pro XI 11.0.06

    In the full document, the print to PDF goes only as far as the table, then ends - not printing the table.  The remaining pages are not printed.
    For example, I have trimmed the file down to just the table page, and included links to it, and a copy of the PDF it generated.
    https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.docx
    https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.pdf
    The error message I now get when I try to print is: "There is not enough memory or disk space to repaginate or print this document."
    However, with the Task manager open, the memory never seems to get above half of the available (the graph bar fluctuates a little, but stays stable")
    The page prints to a regular HP or Xerox printer with no problems. 

  • Acrobat Pro 10 will not install keeps rolling back

    I am attempting to install Adobe Acrobat X on a Windows 7 64 Bit machine, it will not install, gets all the way to the end and then just starts rolling back says the installation was interrupted and that no changes were made to the system.
    I ran the msi from the command line with verbose logging on to see if I could figure out where it fails but couldn't find the error (towards the end it lists many errors but it seems to just be a list of possible errors, not sure but I definately have admin right and ran the msi as an admin so at least those two don't make sense).
    I don't understand why its not installing but I'm really ticked its not at least telling me why its not installing. I had adobe reader and flash on the computer and I was afraid they might be newer versions than just straight Pro X so I uninstalled everything adobe on the computer and it still won't install the Pro X.
    Can someone take a look at my log file and see if they can tell what I'm doing wrong? It would be very appreciated.
    Thanks, SW.
    Log file link
    https://docs.google.com/open?id=0BwFRNdTQrK4sc3Q1aV9uMl9uZXc

    One thought. Have you tried downloading the updates (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and installing directly, rather than doing updates through the help menu?

  • Acrobat Pro 8 will not print some graphics, any ideas?

    I am printing from Word 2007 to an Acrobat Pro 8 PDF.   When I do so, some of the graphics will not show up.   They seem to be in the document as when I highlight them, they show they are blocked and I can actually copy the stuff by highlighting it and copying, but it will not print or display.
    This seems to be a new problem, as it worked fine, then I am not sure what trigered it, but now it will not print all the graphics.   The graphics are just JPGs
    Note the document looks good on the screen, but when I create a PDF or print the PDF, it will not print.
    I also see this a lot when I use my PrintShop Mail program, which uses Acrobat to genterate it files.
    Any ideas?
    Regards,
    Geoff

    Since Acrobat is not an Apple product, you would probably be better off posting your question on Adobe's own forums as they would be geared more toward the issue than an Apple forum:
    http://www.adobeforums.com

  • Acrobat Pro XI will not open

    for some reason on my laptop acrobat pro will not open at all.  reader works fine.  i have windows 7 on my computer.  i read alot of different blogs about this but nothing works.  i removed it from my computer and reinstalled it but it wont even load all the way.  it is working fine on my other computer.  i'm not sure what the problem is, I dont have anything special on my computer to block it or anything.  and the only error i receive is 'Acrobat failed to connect to a DDE server' 

    Try the Acrobat Cleaner tool, then re-install: http://labs.adobe.com/downloads/acrobatcleaner.html

  • Adobe acrobat pro 9 will not launch-

    Gives error message"adobe acrobat was installed as part of a suite-to enable adobe acrobat,please start another component of this suite" I have deleted the photoshop from the suite as I have done to the cloud version of photoshop..I have the serial number of the initial suite…do I delete this version of acrobat pro and reinstall?? if so where do I get the download??Any help is appreciated..

    if you have a suite license, you must use the suite installation files (even if you only want one program from the suite).
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Acrobat Pro 9 will not print to printer in OS X 10.7

    I have a new MacbookPro that came with Lion already installed. I installed a new copy of Acrobat 9 Pro from the OEM CD. All functions including printing to my Brother Laser printer and Canon inkjet worked. I installed the Lion 10.7.2 update and I can no longer print pdf on either printer. Other apps print fine. I get "Error" message under "Status" in printer dialogue box. I now have OS X 10.7.2 and Acrobat 9.4.6 installed. I cannot print pdf files to my printers. Latest drivers for both printers. Printers work fine with all other apps. I tried several combinations of Acrobat and Lion reinstalls. Nothing works. Any insight will be greatly appreciated.

    I've been having a similar problem with Acrobat Pro 9 and 10.6.8, using a Brother MFC 3240C inkjet. This has been going on about a week, since the last ink change. As a half-remedy, I can print pdf's using the "Print As Image" option, reached from the Acrobat print window under Advanced options. I can also print pdf's using Preview.
    Are you able to Print As Image or print with Preview? 
    I had been thinking of upgrading to 10.7, but I don't want to make the situation worse. 
    In any case, with Acrobat Pro 9 and also Acrobat Reader 10, the 3240C print window and display shows everything normal and data moving to the printer, and it makes noises like it's printing, but it spits out blank sheets.
    I had the same response you did out of AppleCare. They said they didn't think it was an Apple problem.

  • Acrobat Pro 9 will not color synchronize with CS5

    Can anybody help with this issue. I am running the latest versions of CS5 Design Premium and all apps color sync fine from Bridge (and in bridge it says color is being synchronized) apart from Acrobat Pro. I have just updated to the latest version 9.3.3 but the issue remains. In the prefs panel in acrobat it states color is not being sychronized, whats more the colour settings don't seem to be sticky. I want to set to Europe prepress 3 but if I close Acrobat and open again it defaults to Europe prepress 2. Any choice in bridge has no affect in Acrobat. Any assistance would be greatly appreciated, for the record I have deleted pref files and done an uninstall and reinstall with no effect.

    I am having the same issue. I did some testing and deleted the preferences and that put the program back in sync. The issue still remains for me because when I select output preview the default profile is not the chosen profile for sync from bridge and Acrobat be comes un synchronized. I hope the issue is addressed with a workaround or update quickly.

Maybe you are looking for

  • Photoshop CC won't save files after update

    i just let Adobe do an update to photoshop CC last night, and now this morning, when i go to create files and save them for use in premiere CC, they don't save. i click save, save as, ctrl+S, they just don't do anything. they don't bring up the save

  • Why is WAP54G RPT MODE better than WRE54G?

    Hello, I have a project to expand a wireless network to another building with two floors.  The proximity is close (literally only 15 feet between the walls), but only clients with great antennas/wifi cards would be able to reach the router in the mai

  • Take ownership of a single line after contract done

    how do i assume liability/ownership for my single line off of an existing family plan if my contract has already expired?   can it be done in store at time of upgrade, starting new contract? or online? or by phone?  thanks!

  • Set up of SDM on SOLMAN 4.0 (SP 13)

    Hi! I would like to setup SMD functionality. I use SAP Solution Manager 4.0 with SP 13. Here are the steps I already executed: a) Installation of Wily Introscope Enterprise Server 7.1 (Location: Server of SOLMAN) b) Deployment if file ISAGENTSMD71*.S

  • Need to uninstall staroffice, need your advise

    Hello folks, I need to free sun box / file share. I figured I want to get rid of staroffice 8 which takes 423mb. I thought the best way is to find packages which account for this installation and remove them. Here is the list of packages. Do you thin