Acrobat Pro 9 not converting all images

Running Pro 9 that's been updated to 9.4.5.  When trying to convert a web page (our newsletter) to a pdf all the images are not showing up.  The images that do show up are older (ie:  images that are always in the newsletter).  I've uninstalled and reinstalled Acrobat.  Every month I convert the newsletter and this is the first time this has happened.
Any thoughts appreciated!  I was able to open the html in word and print to Adobe to convert it, but need to resolve this issue.
Thanks!
Lynn

Viewed the webpage via 3 separate computers.
XP-MSIE 8, Vista-MSIE 8, & Vista-MSIE 8.
Only a few images display. Use of "show picture" does not retrieve the images that do not display.
Pulling the actual URI to the taget images and running them from the browser address bar fetches no image (using each of the computers).
(e.g., http://www.parrottoyangels.com/newsletter/fantastic_rpb.jpg )
Just the red "x" - typically, this is symptomatic of one thing - the target file (the *.jpg) is not present were the link path goes.
n.b., web capture does not travel via the browser
Web Capture using:
--| Acrobat 8 (8.30) — images present in output PDF.
(most of the images, in the PDF, have a black background that obscures the desired image - may want to redo the photos).
--| Acrobat 9 (9.4.5) — no images, just the "?"
--| Acrobat X (10.1.0) — no images, just the "?"
The images that do display on the webpage:
logonl.jpg
LynnDesk.gif
Welcome_Bow_BlueCyan_b_7.gif
bigwings.jpg
tha_you16.gif
RikkiSezN.gif
recipeb.jpg
birdcagesgalore200.gif
goodsearch-88x31.gif
goodshop-88x31.gif
shopmore120.gif
Be well...
Message was edited by: CtDave

Similar Messages

  • Pdf converter pro not converting all columns

    pdf converter pro not converting all columns

    I'm using FrameMaker 7.1 to create multi-file user manual books (one file = one chapter). In Book view, I use the File > Save Book As... option to create the PDFs.
    Most of the FrameMaker cross-references work in the PDF, jumping to the referenced location as expected. Not all do, however. If there is a common trait among the jumps that won't jump, I have not identified it.
    I have downloaded the entire 7.1 "upgrade library" from the Adobe Web site (one update), but the problem persists. Any thoughts would be appreciated.
    Thanks.
    DC Smith

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • When I place a pdf that I have cropped in acrobat pro into indesign all the cropped info reappears.

    When I place a pdf that I have cropped in acrobat pro into indesign all the cropped info reappears. What can I do?
    using mac 10x  cs5.5

    It has to be done with a Preflight fixup. This blog post explains how:
    http://blog.creativeassociate.net/2010/05/17/permanent-cropping-pdfs.aspx

  • How do I open RAW images from DSC_RX100M3?  I downloaded Adobe DNG converter 8.4, but could not convert the images?

    How do I open RAW images from DSC_RX100M3?  I downloaded Adobe DNG converter 8.4, but could not convert the images?

    Small correction to what SSprengel wrote...
    The RX100M3 is supported only by version 8.5.  It sounds like you need a newer version.
    Photoshop Help | Digital Negative (DNG)
    -Noel

  • Lightroom 5.5 is not cataloging all images in some folders

    Version:
    Lightroom 5.5 CC 2014
    System:
    Windows Pro 8.1 R2 64 bit
    When I last updated my catalog in Lightroom, I discovered that in at least two folders, Lightroom did not catalog all of the images in the actual folder on my computer. Because of the number of images I have on disk, I don't know how prevalent this problem. I found two folders where only one image was cataloged. One folder had 12 images, the other had over 200 images.
    All of the photos are the same format, both the single cataloged image and the uncatalogued images. The are Pentax RAW format (PEF). As far as I can tell, PEF images are cataloged fine in folders I've checked.
    Solutions tried:
    Reimporting the entire photo collection to capture "new" images. The missing images display in Windows Explorer and in the Lightroom Import window. However, the images say "This appears to be a duplicate of another image," which is not the case. If I right click, the "Import This" option is grayed out, as are the images themselves.
    I've tried syncing the folder.
    I actually deleted my catalog and re-created a new catalog in a different folder with a different name. This time, the missing images in one of the folders imported, but not the other.
    What's the work-around to force an image import?

    Download the Lr 5.2RC from Adobelabs. There was a bug in exporting which is fixed in this release candidate.
    http://labs.adobe.com
    Finch1055 wrote:
    Recently I upgraded to Lightroom 5.0. I have been noticing that when I export images at 1000px max and 100% quality, the image is very grainy. I can open that same image in Photoshop CC from Lightroom, resize the image to 1000px max, and save, and the image looks great. Below is an example. The first photo is the Lightroom 5.0 export. The second is the Photoshop CC resize and save. Does anyone know what the problem is? I never had this issue with any earlier version of Lightroom and I have been using it since version 1.0.

  • Acrobat 10 not Scanning all Pages from ADF (Automatic Document Feeder)

    Acrobat 10 does not scan all of the pages from the Automatic Document Feeder from an attached scanner, and only scans some of the pages. The ADF works fine with the built-in Windows 7 Scan and Fax, as well as with HP's software, but it just won't work with Adobe Acrobat for whatever reason. The scanners that we are using are brand new, and the model is: LaserJet Pro 200 color MFP M276mw. The issue has been duplicated on four computers and two scanners, in a Windows 7 x64 Enterprise environment. A video of the exact problem can be found here: http://uncoolcat.com/work/LaserJet_Pro_200_Color_M276.mp4
    Would somebody be able to help us resolve this issue?

    Hi Varinder,
    Thank you for the suggestion! We wound up figuring out a way to make their "full feature" software (which does include the TWAIN drivers) install mostly silently, and install only if they've connected the device locally to their computer, as noted in the other post that was submitted a few minutes ago. I really appreciate all of the help that you’ve given us!
    In order to duplicate the WIA driver issue, use only the “HP LaserJet Pro 200 Color M276 PCL6 Print Driver (no installer)” (LJ-Pro-200-color-MFP-M276-driver-only-13170.exe) driver package. This driver only package doesn’t appear to have any of the files you mentioned in your previous post in the Scan_App folder for the TWAIN functionality (but those files are available in the “full feature” setup). We copied the entire “driver-only” folder to our plug and play driver folder, and the drivers automatically install. Once they get installed, there isn’t a TWAIN option anywhere to be found in any scanning application, just the WIA driver as far as I can tell. Adobe Acrobat 10 when using the ADF then skips some pages when scanning.
    However, now that you’ve found the install files for the TWAIN driver for the scanner, this should be a non-issue for people as they can just install those and use TWAIN instead, so thank you!
    Also, I find it rather amusing that you were able to help us with what appears to be an HP issue far better and faster than HP did or could. We spoke with seven people at HP, and not a single one of them pointed us in any useful direction or provide us with any useful information on the matter; had we followed any of their advice we would have lost countless hours (one person suggested taking the scanners apart and thoroughly cleaning the rollers, even though it was clearly stated they work fine from a hardware perspective with the full feature software installed and that they are brand new). So anyway, thank you. If you require anything else from us, let me know.

  • Acrobat Pro not working in Office Word 2003

    Hi!
    Im having troubles with my Acrobat Pro 9.0 in office 2003.
    The Acroat plugins in word are not working, the "acrobat-PDF" button is not working at all, when i select or press something in the dropdown menu nothing happens. the workaround on saving my files is to go to File > print as a PDF document.
    After i finish typing my document and add a few links to webpages and "mailto" links and save/print it to a PDF file, some of the links work and other dont.
    So does anyone know how i can get all my links to work? or even be able to use the "acrobat plugin/buttons" in the word program?
    The guy on suport phone told me its a setting problem that needs to be adjusted.
    TY in advance / Nkla

    Nikola,
    Have you checked the properties of the Adobe PDF printer in your Printers and Faxes menu? You may need to make some changes regarding the settings here.
    Jim

  • Why does the DC installer remove Acrobat Pro XI, and all of its plugins, without warning?

    When you run the "Update" to Acrobat DC, Acrobat XI, and any plugins you are using, disappear. There is no warning. Pro XI is just simply gone.
    It is not possible to install Pro XI along side of DC. If you try, the install seems to work, but the Applications folder only contains DC.
    Also: Acrobat Pro XI does not appear in the Previous Versions list in the Creative Cloud app.
    The only way I have found to get Pro XI back is to uninstall DC, then go to the Pro XI Download page: https://creative.adobe.com/products/acrobat
    Click Download, and the CC applet will download and re-install Acrobat Pro XI. You will then need to re-install all your plugins.
    Adobe: Thank you so much for creating a massive support headache for your customers! Your ability to screw us over knows no bounds.

    Thank you very much for taking your time and answering all the itens.
    01. My description was subpar. I mean this:
    03. I did test and the number of icons it supports in each row is smaller.
    04. Are you sure this is the behavior of XI? I did edit the whole RHP creating new groups and arranging the tools accordingly to my workflow. I did not remember to not be able to remove/add a tool.
    05. The second bar is not permanent. But I understand Adobe chose to clean the UI this way and I simply prefer the other way.
    06. I still did not find the improvements. To place tools in top bar or RHP is also possible in XI. But of course I take your word and will get deeper on this.
    08. Thanks, I was thinking about a tool to search contents.
    10. I mean to dismiss definitively. Did not found a preference for this. And there is no X.
    11. It centers the window vertically no matter the exact position of the last used. Not a serious issue, but still an issue. For example: I set all windows to align to notifications. Acrobat does not:
    Acrobat is behind iTunes notification
    Front: Path Finder, back: Acrobat and InDesign behind all
    Acrobat is behind InDesign window, small difference at bottom
    Illustrator also forgets position and open aligned at top
    12. Very very big grey Open dialog under Mac OS X
    13. It does not crash under a given operation. It occurs with any PDF file and even with no file open. Since the DC install, Illustrator also begun to crash, although less frequently. An example:
    I was using 10.10.2 until some hours ago and now with the updated 10.10.3 the problem remains. I will have to do more tests trying to identify a common element or at least some clue, but the other apps, Adobe's or not, are running OK. If I get any new on this, I will keep you informed.

  • Bought and paid for CS4 Premium, Acrobat Pro not accepting serial #

    My Acrobat Pro application, part of the CS4 Design Premium, will not accept the same serial I used for my other Adobe applications.
    Any solutions beyond tossing two hours of my life in a phone call to Adobe India Customer Service? I have had one good experience using Adobe CS out of five, but really it takes hours to get someone who is helpful. Adobe needs to address this brutal customer in need situation.
    Apple buys Adobe, everything is fixed.
    Solutions? Beyond waiting for Jobs to mount a take over?

    I should add, I did install the complete CS4 Design Premium package in mid November 09. Worked flawlessly, until yesterday that is.
    After some hours on the phone with Adobe customer service in India, finally the serial question was solved for all applications BUT Acrobat Pro. The tech said the serial number issue was caused by unknown forces. Odd, Adobe has a special number for serials not being accepted. It is a 1-800 number, I used it. I believe it is an Adobe made issue to keep pirated software out of the loop.
    The tech said he would call me back in thirty minutes to confirm all applications were in perfect working order. I played with the entire group and AP was the dog of the bunch.
    The tech never called back to check on me. That was nearly 24 hours ago. I anticipated this would be the poor result from Adobe.
    I suspect I will need to devote another hour or so in Adobe Hell India Zone for a fix. The customer service is something which turns me off all Adobe products. When I find replacements for the software I will jump at the chance.

  • Convert all images to DNG without stopping for errors

    When I convert images to dng format i don't sit around by my computer and wait for them all to convert. I have better things to do. I will go run an arrand or convert a bunch while i go to sleep. The problem is that lightroom stops converting when it encounters an error. Can you make a feature that will skip the picture with the error and log it to a log book so I know which ones didn't get converted. This way, when i come back to my computer the next day, I don't have to start the long agonizing process all over again, I can just work with the error photos to see what the problem is.
    The same problem could happen with importing, or exporting, or converting to jpeg and exporting. These are all very time consumeing batch processes that need to have the option to skip error photos and log them to a log book instead of suspending the whole export, import, etc.
    Thanks!!!!!

    I want to claw back some space from iTunes by making all my music AAC, as this seems to be about two thirds file size compared to AIFF and MP3.
    This is incorrect.
    AAC and MP3 are almost identical in files size at the same bit rate.
    At 128 kbps, songs are ~ 1 MB per minute.
    At 128 kbps, file sizes are ~1/10th the size of AIFF or WAV.
    Is there a quick way to do this without duplicating each file in the process using export?
    You don't use export to convert songs.
    Ideally, you want to convert from the best quality file (the CD) available.
    Converting from one lossy format (AAC or MP3) to another lossy format will further degrade the quality.
    If you want to convert all your music to AAC;
    Open iTunes prefs -> Advanced - Importing.
    Select AAC 128 kbps. This is the default and a good compromise between size and quality. MP3 at 128 kbps will not be as good as AAC at 128 kbps.
    Select all the songs you want to convert.
    Go to menu Advanced -> Aconvert selections to AAC.
    Once it has finished, you can delete the old files.
    To find them easily, menu Edit -> View options and select Kind.
    Click on this box in the column header to sort on this. Delete the files which are not AAC.

  • Uninstall/Reinstall of Acrobat Pro not working

    Acrobat Pro was malfunctioning. Every time I tried to search the file, it would crash. So I uninstalled it then tried to reinstall it, but Adobe Manager says it's up to date. I can't download and can't reinstall.

    Sunday I uninstalled the program (I’m on the cloud) but couldn’t reinstall it. The launchpad said it was up to date, even though it was not on my system. So I downloaded and installed the 30-day trial version.
    I had the exact same issues with the trial, so my technician figured it must be the preferences. He threw out all the old ones and the program worked flawlessly for 30 minutes. Then it would crash when I changed views by clicking and dragging. And about 15 minutes after that, it started crashing again when I tried to search. It also reverts to old preferences in the tools.
    That may help you figure something out. I’m going to start over with troubleshooting again today.

  • Desktop can not see all images in aperture project

    When trying to change the background picture desktop lists my aperture projects but only displays a subset (5 of 114) of the images in one project. Also have 2 of 8, 152 of 152, and 0 of 12 in different projects.

    It's possible you don't have Previews for the "missing" images (Aperture shares the Preview, not the full image).
    What happens if you update every image in the Project's Preview?
    To update all the JPEG previews in a project
    In the Library inspector, Control-click the project whose JPEG previews you want to update, then choose Update Previews from the shortcut menu.

  • Acrobat Pro Not Working after Latest Update to Snow Leopard

    After getting the latest update for Snow Leopard I get the following when Acrobat tries to boot:
    Process:         AdobeAcrobat [157]
    Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
    Identifier:      com.adobe.Acrobat.Pro
    Version:         9.0.0 (9.0.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [77]
    Date/Time:       2010-03-31 11:25:30.253 -0600
    OS Version:      Mac OS X 10.6.3 (10D573)
    There is more after this but the summary is that it doesn't boot. Is anyone having this problem also? And if so how did you fix it.? I have tried uninstalling and reinstalling Acrobat but with no success.
    Thanks in advance.
    David

    BBfolgart wrote:
    Hi Michael,
    Thanks for your reply. However how can you upgrade when the program won't boot? I tried downloading again from Adobe but the version that comes over is 9.0. Is there anyway to force a load? Or anyway for Adobe to push me 9.3.1?
    Regards,
    David
    First try removing preference  and or .plist files for Acrobat. Then when you get working try this tip below that might help when you update the application and it fails.
    I've come across this in these forums That may or may not solve the update issue for "some" people:
    <http://forums.adobe.com/message/2692924#2692924>
    see if you think. it helps.

  • BI 7.0,  BDLS is not converting all logical systems for datasources

    Hello all,
    We have refreshed an ECC system, and during the post steps in BI, we were running into issues.
    We've ran BDLS to convert the logical system from ECCCLNTXXX to ECCCLNTYYY, but it's was not converting for several datasources.
    One in particular was causing several problems, and terminating the conversion.
    0FC_CI_01.  It is still hanging on to the old logical system.  BDLS terminates with the following information:
    Short text:
    Active version of emulated 3.x DataSource 0FC_CI_01 cannot...
    Basically, the exact symptom of Note 936644.
    Eventually, through a series of trials, we discovered we could assign non-active sourcesystem/logical system combinations to the objects.  As a result, we deleted the source systems entirely, ran BDLS to the ECCCLNTYYY, then recreated the sources.
    This finally worked.  What I need now is a root cause.  Why would BI refuse to change the logical system of an object to an active one, but have no problem with an inactive?

    Mike,
    After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
    Refer to the below doc for detail. Also refer to note 886102.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
    Below note talks about similar issue.
    How to change all infosources to the new source system automatically
    Hope this helps.

Maybe you are looking for