Acrobat pro crashes a lot when I am annotating and commenting in a pdf
I am running Acrobat Pro on a MacBook plus I have the app for the iPad (for synching). I commonly annotate, highlight, and comment in articles or in forms. Recently (within the last 3 months), the program stops, closes the document (losing any changes I have since the last save) and shows a screen with a system log file and the option to "report the problem" to Adobe (which I always have). Is this a common problem? It seems to be the only program that is behaving in this manner. I will continue to search for some insight but would appreciate any guidance or suggestions.
Thank you!
Hi Sara,
Thanks for moving the discussion over. I have been working on the issue a little, and I believe I have isolated the problem to the "Add Text" feature under the tools menu. In a new pdf, I select the "Add Text" option, then change the options for it (e.g., red text, 10pt), and begin annotating the document by inserting the text in the document. When I finish (no longer adding text) and perform another action (going to another page, highlight text), within a few keystrokes, Acrobat crashes. I have replicated the process a few times now.
Thanks, again.
Similar Messages
-
I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?
Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium -
I have an iMac OSX (version 10.9.2). Adobe Acrobat Pro crashes every time I try to use the "find" function. Anyone else have this issue?
I was having this issue too. After a bit of a search I found an official response from Adobe with a patch you can install until the next update.
http://helpx.adobe.com/acrobat/kb/product-crash-search-mac.html
I've just installed the patch and done a quick test, everything seems to be working fine now... -
How can I reinstall Abode Acrobat Pro? Had problems when first downloaded and had to uninstall.
How can I reinstall Abode Acrobat Pro? Had problems when first downloaded and had to uninstall.
You can refer to :
Acrobat Learn & Support
Installing, uninstalling Acrobat X | Mac OS
Adobe Acrobat X Pro * Activation and registration
http://www.adobe.com/content/dam/Adobe/en/accessibility/products/acrobat/pdfs/acrobat-xi-p ro-accessibility-best-practice…
They are useful resources.
Regards
Rajshree -
Acrobat Pro crashed from Network Accounts [FIX]
In case anyone else has this problem and stumbles across this during a search...
Acrobat Pro will unexpectedly quit when opened from a network account. This is because Acrobat tries to write to
~/Library/Application\ Support/Adobe/Acrobat/10.0 but can't.
Here is the fix:
rm -Rf ~/Library/'Application Support'/Adobe/Acrobat/10.0
mkdir /Users/Shared/10.0
ln -s /Users/Shared/10.0 ~/Library/'Application Support'/Adobe/Acrobat/10.0Hello,
Please see this article - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Regards,
Deepak -
Adobe Acrobat Pro crashing after adding video
Why is my Adobe Acrobat Pro crashing after adding video? It added video fine just weeks ago but now has crashed 11 times while trying to add video. I've tried to add video to a 30 page presentation, a 40 page presentation and a one page test presentation...all crash after adding video. Please help.
http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
-
Reinstalled Acrobat Pro 8.1.6 won't let me print web pages to PDFs
I'm really ticked at Adobe's "help" in updating the program only to cause a lot of misery. I'd read Acrobat had a security update, and got a constant reminder from Adobe update to install the available update. I've been using Acrobat Pro 8.1.6 with absolutely no problems printing web pages to PDFs. I installed the 8.1.7 update which immediately disabled Acrobat completely. So I wasted a lot of time uninstalling Acrobat and reinstalling sequential versions to get back to 8.1.6. Now I can't print web pages to a PDF.
I had NOT done anything else to installed programs in the meantime, except that probably Norton has automatically updated antivirus files in the background. I don't have any problems using Acrobat to open and print an existing PDF, or to create new PDFs from my scanner. I can do a hardcopy print of a webpage by selecting my Brother printer. From Word 2002 and Excel 2002, I can create a PDF by "printing" to Acrobat as usual. The only problem is creating a PDF by "printing" a webpage by selecting Acrobat as the device from the list of available printers. This problem happens both with Firefox and with Internet Explorer 7.
I have Windows XP Pro SP3. I did the most recent Windows Tuesday security update several days before messing around with Acrobat and did not have any problems printing PDF files from Firefox or IE7. So, it seems like it's clearly an Adobe Acrobat problem. I get the small box saying "Preparing to Print" which goes nowhere and then I have to use the Task Manager to get out of the loop. That closes Firefox, and when I reopen Firefox, the same webpage comes up.I'm really ticked at Adobe's "help" in updating the program only to cause a lot of misery. I'd read Acrobat had a security update, and got a constant reminder from Adobe update to install the available update. I've been using Acrobat Pro 8.1.6 with absolutely no problems printing web pages to PDFs. I installed the 8.1.7 update which immediately disabled Acrobat completely. So I wasted a lot of time uninstalling Acrobat and reinstalling sequential versions to get back to 8.1.6. Now I can't print web pages to a PDF.
I had NOT done anything else to installed programs in the meantime, except that probably Norton has automatically updated antivirus files in the background. I don't have any problems using Acrobat to open and print an existing PDF, or to create new PDFs from my scanner. I can do a hardcopy print of a webpage by selecting my Brother printer. From Word 2002 and Excel 2002, I can create a PDF by "printing" to Acrobat as usual. The only problem is creating a PDF by "printing" a webpage by selecting Acrobat as the device from the list of available printers. This problem happens both with Firefox and with Internet Explorer 7.
I have Windows XP Pro SP3. I did the most recent Windows Tuesday security update several days before messing around with Acrobat and did not have any problems printing PDF files from Firefox or IE7. So, it seems like it's clearly an Adobe Acrobat problem. I get the small box saying "Preparing to Print" which goes nowhere and then I have to use the Task Manager to get out of the loop. That closes Firefox, and when I reopen Firefox, the same webpage comes up. -
I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have an iMac with Yosemite. I have Adobe Acrobat Pro van 8.3.1.
I am unable to insert a pdf document into a pdf document. I go to Document/Insert in the menu bar, get a spinning ball, can do nothing with the app except force-quit.
What's my upgrade? I cannot find one. Do I have to pay full price for a version that will work?Your version of Acrobat is quite old and not compatible with any current OS, so problems are to be expected. It is too old to qualify for an upgrade as well, so if you want the current version (XI) then you need to purchase a new license, which you can do via the Adobe Products Page.
-
Hi I'm using the latest version of acrobat pro on a Mac i cannot save or print anything as a pdf from the internet i just get a black screen, my previous version worked fine, any ideas please
You can read this article to see if it helps:
http://kb.mozillazine.org/Problems_printing_web_pages -
We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...
Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance. -
Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.
Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
Thank you so much for your help.
Pekka
Pekka Saatsi
arkkitehti SAFA
SAATSI arkkitehdit oy
Bysmedsintie 56
06500 Porvoo
040 5955933
[email protected]<mailto:[email protected]>
www.arks.fi
Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
You have been mentioned
by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644> -
I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.
It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.
-
Upgrade to Acrobat Pro XI on Window 8.1 downloads, installs and configures. Then pressing the launch button in the dialog box doesn't launch program.
Using the start button, Acrobat Pro should appear. But it might not, being Windows 8. Maybe it puts an icon on your desktop, maybe not.
How about checking c:\program files (X86)\adobe\acrobat 11.0\acrobat. If you have this folder, look for Acrobat.exe.
Maybe you are looking for
-
Difference b/w Read and SynchRead in FTP Adapter
Hi All, I wanted to know the difference b/w read and synchread in FTPAdapter. Thanks.
-
How to maintain payment term descriptioin in other languages in TVZBT table
Hi all, i have to maintain the payment terms in different language. For that, i am updating the table TVZBT by using TCODE SE63 in development sys. it has not asked any change request.but table is updated . so i can not move the changes to production
-
when i use tcode charm_create .... and we provide ibase......from which table all those ibase number are coming from......i checked IBIB...it doesnt have all those ibase number which im seeing in the F4 of ibase in charm_create tcode !!
-
Referencing EJB from WAR frile
Dear All, I have an deployed ejb, and want to reference this in a servlet within a WAR file. How do I do this without also placing the ejb classes within the WAR ! I realise that I could jar it all up into an EAR file but would rather keep the compon
-
MBP Black Screen after software update
This is posted also in OS X.6.8 forum: Hello to all, Just after dowloading today's latest updates, iTunes, Safari, something about file exchanges and Apple remote I beleive, there needed to restart and once done, no chime and black screen... All was