Acrobat Pro x doesn't work

Hi,
I bought Adobe CS6 Suite and was parallel testing the creative cloud. Now the test phase of creative cloud is over and I only want to use my cs6 programs. But Acrobat Pro X stopped working (even tough I bought it as part of Adobe CS6 Design & Web premium) - I can't open .pdfs anymore.
Very annoying.
I deinstalled the suite and all the other CS6 programs run nicely, but not Acrobat - Can anyone help??
Thanks,
Maritna

That is the perpetual version of Acrobat X and that is available here: Download Acrobat products | Standard, Pro | XI, X

Similar Messages

Firefox sent an update but it wouldn't download because it said it came through an e mail improperly coded or tried to use adobe acrobat and that doesn't work. what do I do

firefox sent an update to my imac but I couldn't download it because it said it came through an email improperly coded or tried to use adobe acrobat and that doesn't work. what do I do??

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

OK, some more info.
I have re-installed os/x and applied all of the updates.
I have tried to migrate my existing accounts and the problem consistently manifests as below:
1. In a new user account, I can log in and use the keyboard then logout
2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
Any more ideas anyone?

How Can I Create a Print Button on a PDF Using Acrobat Pro That Will Also Work on iOS?

I created a Print Button on a PDF document using Adobe Acrobat Pro on my Mac. The Print button works perfectly on different browsers on my Mac and on Windows (running under Parallels Desktop) as well.
When I open the document on my iPad the Print button doesn't even appear. I am guessing that this is a Flash issue but it may be more related to the fact the the action for the button is to access the Print menu item, which doesn't exist under iOS.
Is there any way to create a Print button using Acrobat Pro that will work on a Mac and Windows but also on iOS?

In order to initiate printing by clicking a button, the button has to have either an "execute menu item" type action or use the "print" JavaScript method. As you guessed, the former won't work since there are no menu items to execute, and the latter can only work if the particular PDF viewer you're using supports it. I'm not aware of any that do on iOS.
The button doesn't appear because you're probably opening it in the default PDF viewer, which doesn't support forms at all. If you were to open the form in Adobe Reader, you'd see the button but it wouldn't work.

Adobe Acrobat Pro Licence is not working any more

Hi, Adobe Acrobat Pro is not opening any more and giving the error "Licence is not working any more". I have a CS4 on Mac OS X 10.5.8. I tried all the suggestions in the Help Forum. What remains is to install CS4 again. Is there any risk doing that? Or is there any other option. Best, Felix

Hi xilef79,
Have you tried all the suggestions in this Help document: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Please let us know how it goes.
Best,
Sara

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Hp officejet pro 8600 doesn't work with yosemite

Dear,
I've installed yosemite on my mac and now scanning doesn't work, there isn't the scanning button in system/print and scan like before installing yosemite!
I've tried to delete and reinstall driver (also update driver from appstore after installed the new driver) and I've tried to use the hp scan software but nothing the softaware report that there are no scanners!
Printing works very well the problem is only on scanning and only on mac because other pc with windows works correctly!
I've tried to follow this post http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/No-more-scanning-after-upgrading-to-MacOS-X-1... but nothing the scan doesn't work also after done all the things in the post!!!!!
I've also tried to speak with the phone assistance (in italy beacuse I'm writing from italy) but they have no advice for my problem!
Please help me I need scanning with mac for work!!!!!
Thanks
marchinho

Hello ,
Thank you for contacting the HP Support Forum. I understand that you HP Officejet Pro 8600 is having issues scanning after your Yosemite update. After a little research, I found a document that might get us started in the right direction.
Try these steps first, and then please let me know if they worked or not.
Regards,
wise_owl
I work on behalf of HP.

Keyboard on Sat Pro 6100 doesn't work properly after remedial work

Hi,
My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.
When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.
Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).
Maybe, internal keyboard controller overheating?
Does anyone know what this might be? :-(
Cheers,
Homer

Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.
It's strange that your problem appears after a while and not right away.
It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)
I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...
Regards
electrochain
P.S. Please keep us updated on your steps

Does Acrobat Pro 9.5.5 work with Yosemite 10.10.2

I am running an iMac (20-inch, Mid 2007) with a 2.4 GHz Intel Core 2 Duo, and 4GB 667 MHz DDR2 SDRAM, with an ATI Radeon graphics card. After upgrading to Yosemite 10.10.2, Adobe Acrobat Pro hangs when it is asked to do anything other than display a PDF. Is my Acrobat incompatible with Yosemite? Things were working so well...

Moving this discussion to the Acrobat Installation and Update Issues forum.

Acrobat Pro 9 Used To Work on my 64bit Windows 7 machine

I recently replaced my 32bit XP platform which was running with Acrobat Pro 9 for a few years with a 64bit Windows 7 earlier this year. It worked just fine. For some reason, I am now finding that trying to 'actuate' the program fails. As does clicking on a PDF file name. Acrobat Reader works OK but not "Pro". I uninstalled it and reinstalled it. I went to their website and painstakingly installed upgrade on upgrade from the earlier to the 9.5.5 current one. Still no cigar. Anyone have a clue?

uninstall.
run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer.
right click the setup file and click "run as administrator".

Acrobat Pro version 6 not working in vista ( Windows 7 ) ?

What is the problem with adobe Acrobat pro version 6 and vista (windows 7)?.....really annoying having to upgrade later version costing hundreds of pounds

I am not sure if VISTA has the same problem as Win7 or not. For Win7, the AcroTray application that is used for PDF creation (both when printing to the Adobe PDF printer and with PDF Maker in AA6) will likely not work correctly. This may also be the case with VISTA. To get around this problem you have to print-to-file (you can change the PDF Port to FILE in the printer properties). After the file is create, you can open it in Distiller to complete the PDF creation. It may be possible to create watched folders to automate this process, but is not as ideal. In any case, you will likely have to use a work around. Also, update your AA6 (currently at 6.0.6). I have been able to do this with AA5 on Win7 as a test and it did indeed work. There may still be other issues for AA5 on Win7, but that was the major one.
All of these changes came from the rewrite that Adobe had to do to be compatible with the new OSs, not a trivial task. Do you want to blame Adobe or MS or both? Take your pick, but the end result is that it is time to upgrade. Unfortunately, AA6 can not be upgraded to AAX. You have to buy AAX at full cost at this point. To get the upgrade you would have to have at least AA7.

Acrobat 7 update doesn't work - Error 1304

I'm running Vista Home Premium and trying to upgrade Acrobat Pro 7.0.0 to Acrobat Pro 7.1.1. The update supposedly fixes a security hole and was released yesterday, 03/18/09. Every time I try to run the update, I get "Error 1304: Error writing to file C:\Program Files\Adobe Acrobat 7.0\ActiveX\AcroIEHelper.dll. Verify that you have access to that directory."
Adobe support (800 8336687) refuses to provide phone support for Acrobat 7 (which seems odd considering they just issued an update), but referred me to article 329117: http://kb.adobe.com/selfservice/viewContent.do?externalId=329117&sliceId=2
I tried all of the solutions in this article and none of them work. Every time I try to start Acrobat, the install begins again and fails with Error 1304, so the update has effectively destroyed Acrobat Pro.
Somebody please help me!

You have to install the updates in order, not just to the final one. It is probably simplest to go to the Adobe.com > downloads > updates site and look at all the updates. Download all the applicable updates and install them in order.

Rotate button in Tools in Acrobat pro 10 is not working?

Hi All,
I am a user of Acrobat pro 10 and I have been using the rotate button in tools to rotate objects in any direction (Clockwise, anticlowise and 180 clockwise).
Just recently, I notice that I can't rotate objects to any direction.
When I click the rotate tool, it wo'nt rotate at all.
How can I get this working as I work with lots of documentation that invloves inserting one pdf onto another.
Any help to restore this tool is greatly appreciated.
Many Thanks!

Hi xilef79,
Have you tried all the suggestions in this Help document: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Please let us know how it goes.
Best,
Sara

Acrobat Pro 8, Highlight not working in browser

The company I work for has a specific audience that requires functionality in Acrobat Pro. This audience accesses these PDF document on our intranet using IE6 and uses some of Pro functionality (highlight, stick notes) and saves the annotation files locally. All that worked well with Acrobat Pro 6.0, but we recently upgraded to Acrobat Pro 8 and all these users are seeing is basic functionality, similar to what is in Reader. NO more annotation features.
I have verified and Reader is not installed on these workstation, a clean install of Acrobat Pro 8 is installed. If I open a PDF outside of IE6, Pro opens and all the functionality is there, but in IE6 it is limited (Reader Like). I have attempted to add the tools to tool bar but after selecting tools, they do not appear. Browser just refreshes without tools, as if they are being prevented from loading.
Has Adobe changed the functionality of Adobe Pro to only allow in browser viewing of documents with something like Adobe reader? I have searched the web and have seen nothing about this. Please help.

I am not sure if VISTA has the same problem as Win7 or not. For Win7, the AcroTray application that is used for PDF creation (both when printing to the Adobe PDF printer and with PDF Maker in AA6) will likely not work correctly. This may also be the case with VISTA. To get around this problem you have to print-to-file (you can change the PDF Port to FILE in the printer properties). After the file is create, you can open it in Distiller to complete the PDF creation. It may be possible to create watched folders to automate this process, but is not as ideal. In any case, you will likely have to use a work around. Also, update your AA6 (currently at 6.0.6). I have been able to do this with AA5 on Win7 as a test and it did indeed work. There may still be other issues for AA5 on Win7, but that was the major one.
All of these changes came from the rewrite that Adobe had to do to be compatible with the new OSs, not a trivial task. Do you want to blame Adobe or MS or both? Take your pick, but the end result is that it is time to upgrade. Unfortunately, AA6 can not be upgraded to AAX. You have to buy AAX at full cost at this point. To get the upgrade you would have to have at least AA7.

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

Acrobat Pro x doesn't work

Similar Messages

Maybe you are looking for