Acrobat pro XI-sign in can't connect to the internet

after installing the trial it demands signing in, but it always shows this message. the internet is online!

Sign in or activation errors
Mylenium

Similar Messages

  • My macbook pro, iphone, and ipad can not connect to the internet simultaneously. However my room mates computers that are not apple products are connected to the internet.

    Occasionally my macbook, iphone, and ipad would not be connected to the internet at the same time. However, when they can connect, all three are connected at the same time. It is not my internet because my room mates computers are connected to the internet the whole time without any problems. When I can't connect, I can still see the network name on th wifi network search. However, when I click connect, the only message that pops up is can not join network.

    Hi Lao3262,
    Thanks for using Apple Support Communities.  These articles have troubleshooting steps for issues with Wi-Fi on Macs and iOS devices respectively:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers,
    - Ari

  • Recently just reformated my window 7 home premium 32-bit on my mac book pro. But I can't connect to the internet cause the drives are missing however I could before I formated and still can on mac. What should I do?

    As mention as my topic. What should I do?

    Well on my mac I do have Bootcamp in my "finder" and it does contain my files from windows. Plus it does meet all the requirement but however I have no clue how to continue from here. As in which to download mainly etc.
    (P.S I am a newbie on Mac so expect noobish questions)

  • I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

    I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Ipad keeps asking me to sign into iCloud.  The problem is, I can't connect to the internet to do this because it keeps popping up.  It's a 'catch 22'.

    A pop up on my iPad keeps asking for my iCloud password, however, when I give it, it doesn't matter because I am not connected to the internet.  I CAN'T connect to the internet because of the popup.  How can I get rid of the pop up so I can connect?

    You have bought the book but have you previously downloaded it to your iPad?  If you go to your books collection and there is a little cloud icon on the cover of the book with a down arrow that means it's not stored on your device and you would need an internet connection to read/download it.  If that's not the problem and Demo's suggestions don't work how about trying this desperate move:  Settings > Airplane Mode  (turn on)     And try again.   Do you have other downloaded books in your collection?  If so do they act the same way or do they open ok?  If they open then there is something corrupt about that particular book in which case I would delete it and re download it when you have access to the internet.

  • After update I can't connect to the internet in no way, shape or form

    I rarely update because: 1) something always breaks when you update (like now) and 2) I don't like to deal with new crap like GNOME 3. Anyway:
    I bought a new router (TL-WR1043N) and configured it with an old Ubuntu because connecting to 192.168.1.1 didn't work on any of my Arch Linux installations. Now... here's where it all starts... I can't use the 'n' wireless on my laptop since I have to install something to use WPA, and to install that I need to update, but I don't want to deal with GNOME 3 and Firefox >3. But I gave up eventually gave up and connected my laptop to the router by Ethernet cable. Setting that up was very easy: 'ifconfig eth0 up; dhcpcd'. Voila! I updated my whole system and restarted. To see how badly I damaged my system I opened Nautilus (I use Openbox with some GNOME programs): shock and dismay, the fonts are visible from the moon. I guess I'll have to quit using GNOME programs completely now but I expected that. I used to use KDE back in the day and when KDE4 came forth from that unholy pit, I immediately abandoned it for GNOME. This time we had more time to prepare, everybody knew what GNOME 3 was going to be. I started using Openbox quite a long time ago.
    Anyway: Now to fix my wireless right? WRONG! I can't connect to the internet on cable to get the packages for wireless. I installed Windows 7 64 on the same laptop and it connects to the cable. Ubuntu 9.10 Live also connects, but due to the changes of rc.conf and network stuff I can't connect at all with Arch Linux.
    So I decided to abandon it completely and reinstall from scratch. But the Live CD also doesn't work. With all the ways I've tried it all comes down to this:
    dhcpcd always times out waiting for a carrier and 'ip addr' shows 'eth0: <NO-CARRIER, ....' if the interface is up. I'm not sure what information I should give you, but I can't paste any here since I can't connect to the damn internet on that laptop.
    About the router: the cable is plugged on port 1 and the LED for it flashes if I reboot the computer. In Windows it stops flashing while it connects and flashes again when connected. I removed 'network' from DAEMONS and it flashes till I start it with '/etc/rc.d/network start'. This hangs for a while and returns '[DONE]' even though it doesn't work and the LED never flashes again on the router.
    In rc.conf I have exactly what the example says for DHCP. In any case, it doesn't work with the Live CD either.
    EDIT 1: From lscpi: painstakingly typed:
    06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    07:00.0 Ethernet controller: Realtek Semiconducctor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    EDIT 2: Just to be clear: I can use the wireless on the laptop on the Live CD, but I want to use the cable because of the greater speed (94Mbit/s on cable 60 something on wireless n, 20 something on g) and because I rarely move the laptop.
    EDIT 3: lspci -v shows "Kernel driver in use: r8169   /   Kernel modules: r8169", so the driver is loaded.
    EDIT 4: So if I boot from the CD. ip addr shows:
    eth: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 00:1d:92:...etc... brd ff:ff:ff:ff:ff:ff
    And  the LED flashes. When I type: "ifconfig eth0 up" it stops, never to light up again and ip addr shows: "eth: <nO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    Last edited by imtired (2011-09-08 12:36:51)

    When you're in Arch, use output redirection
    lspci >lspci.out
    then boot into Ubuntu or something where you can access the files and the BBS,  Of course, don't forget to use a new file for each command output.
    The new network config in rc.conf is not that complicated (wired anyway; never used wireless).  OTOH I've had issues on two machines where I have to restart the network daemon (rc.d restart network) or rerun netcfg (netcfg eth0) after boot to get connectivity. And I still haven't come to grips with the ip command.

  • Can connect to my house network, but can't connect to the Internet (other computers can)

    Hello,
    I'm experiencing a strange problem. Since I started my Mac Pro (cold start) some hours ago, I've lost the hability to connect to the Internet (Safari and Mail say I'm not connected). However, I can connect to 192.168.2.1 (my router) and see its webpage (it says it's connected to the Internet). If I use another computer on the same network, it can also connect to the Internet.
    Weirder, if I go back to my Mac Pro with "no internet" and launch Parallels Desktop, then I can use WinXP to browse the Internet; I'm writing this post on my WinXP virtual machine.
    This leads me to think there's a problem with how my Mac OS handles the networking. I have checked the Console, but the only related string I found is this:
    16.04.13 22:03:25
    kernel
    SIOCPROTOATTACH_IN6: en2 error=17
    As expected, Google doesn't reveal anything about that (and I'm connected with the first ethernet port). I've tried to restart my Mac, but the problem persists (exact same symptoms).
    Could it be a DNS cache issue?
    I don't see, other than a DNS problem, why I can't connect to the Internet with my Mac OS while I can on my virtual machines. If it was a driver problem, I wouldn't be able to connect to my router. If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)?
    I could also reinstall the OS (waste of time, btw), but I'd really like to understand the problem, not just clear it and forget about it.
    Or better than guesses, anyone already experienced this?
    Any help welcome.

    If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)
    No DNS caches, it looks up the alphabetic and then uses the numberic from then on.
    http://17.149.160.49
    is Apple, Inc main US web site. It that works, and the alphabetic does not, you have a DNS probelm.

  • Can't connect to the internet with airport or firewire

    I can't seem to connect to the internet with airport or firewire. I recently restored my old G4 mac mini PPC 1.42 (with airport and bluetooth) Tiger 10.4.8 with a new harddrive. I have it connected to my leopard mac pro, internet sharing is on (both computers), the systems are connected, however, the mini just can't connect to the internet. tried it also using airport, no go. network diagnosis seems to go in a constant loop.

    works ok with ethernet connection though.
    that'll work.

  • I put the BT WiFi app on my iPad Mini and now I can't connect to the internet.  Please help

    I put the Bt WiFi app on my iPad Mini  and now I can't connect to the internet.  Please Help

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My wi fi icon has disappeared from my toolbar and I can't connect to the internet

    My wi fi icon has disappeared from my toolbar and I can't connect to the internet.  How can I fix it?

    In System Preferences > on the left panel, click the + sign (bottom right) to add a new Wi-Fi service then set it up.

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Got a new motherboard, My Creative Suite thinks it's a new computer. Can't register my serial number, because it can't connect to the internet. Internet works fine. What do I do?

    Got a new motherboard after my PC crashed, because my old one was defect. Now my Creative Suite thinks it's a new computer. I can't register my serial number, because it can't connect to the internet, but internet works fine. What do I do? My operating system is windows 7, System is Intel Core i7-4790 / 16 GB RAM

    Contact support by web chat to reset activations and refer to this:
    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • Why (out of the blue) airport extreme can't connect to the internet?

    Suddenly the airport extreme on my macbook pro (10.6.8) decided to completely stop working. the modem/router work fine as i tested them with another computer and i've brought my macbook to another house and tested it there and the same thing happens.  if i'm hardwired via ethernet cable the internet works like normal. which is what i'm doing now.
    the wireless icon on the top of the screen shows full strength and when i click on it it shows my network with a check mark next to it but if i try to open a browser window it won't work. opening network preferences shows that airport is not connected and it does not have an IP address and can't connect to the internet. if i open airport utility (5.6.1) it says "airport utility unable to find any airport wireless devices".
    everything was working fine a few days ago.
    what's going on?

    The same thing happened to me, and I took it to get looked at and they even replaced my base station, but then it kept disconnecting. I finally  found the answer that solved my problem, but now I can't find the post that solved it to direct you toward. So I'll try to re-create it as best as I can.
    Like that user, I have Xfinity. The other user had received this assistance from Comcast tech support (Which is sad that Comcast was more helpful than ... anyone ... but especially Apple), so if it doesn't work they should be able to help fill the gaps. Chances are, you may be better off getting assistance from your ISP than from Apple.
    Basically, Comcast switched over to IPv6, and it needs to be accounted for or else the AEBS will drop the signal from the DSL modem.
    1. Open Airport Utility
    2. Click Edit on your AEBS icon.
    3. Click the Internet tab.
    4. Click Internet Options.
    5. Make sure IPv6 Mode is set to "Tunnel."
    6. Click the "Enable IPv6 Connection Sharing" radio button so that it's active.
    7. Save changes, Update the new settings, and let the AEBS restart with the new changes.
    I fixed it a couple of days ago, and it's worked perfectly since then.
    Here's the post that fixed it. https://discussions.apple.com/message/21916742#21916742
    Here's the Comcast information the post refers to. http://www.comcast6.net/index.php/6to4config#faq3
    Message was edited by: Crimsondude

  • Safari 5.1.1 can't connect to the internet.  Every other browser can.

    I've tried resetting Safari, reinstalling Safari, and resetting my router to factory settings.  Safari still can't connect to the internet, but everything else on my Mac (Snow Leopard 10.6.8) can. 
    I recently tried setting up Open DNS just because I've had problems with Comcast lately.  But I've since returned DNS to be detected automatically.
    Thoughts?

    kextstat -kl | awk ' !/apple/ { print $6 $7 } ':
    at.obdev.nke.LittleSnitch(2.2.05)
    com.rogueamoeba.HermesAudio(3.0.2)
    com.Cycling74.driver.Soundflower(1.5.1)
    com.parallels.kext.prl_hypervisor(4.0
    com.rogueamoeba.hermes(3.0.2)
    com.parallels.kext.prl_hid_hook(4.0
    com.parallels.kext.prl_usb_connect(4.0
    com.parallels.kext.prl_netbridge(4.0
    com.parallels.kext.prl_vnic(4.0
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    com.parallels.vm.prl_naptd
    com.wibu.CodeMeter.Server
    com.rogueamoeba.hermes
    com.parallels.desktop.launchdaemon
    com.orbicule.uc
    com.mysql.mysqld
    com.adobe.SwitchBoard
    at.obdev.littlesnitchd
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    net.culater.SIMBL.Agent
    com.parallels.desktop.client.launch
    com.adobe.CS5ServiceManager
    at.obdev.LittleSnitchUIAgent
    at.obdev.LittleSnitchNetworkMonitor
    com.google.keystone.user.agent
    com.google.GoogleContactSyncAgent
    com.adobe.AAM.Scheduler-1.0
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null:
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AECore.framework
    Adobe AIR.framework
    Compressor.framework
    DSPPublishing.framework
    Frameworks
    FxPlug.framework
    L6TWXY.framework
    MacFUSE.framework
    MediaServerAPI.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    ProMetadataSupport.framework
    Qmaster.framework
    TSLicense.framework
    WibuCmMacX.framework
    WibuCmWebMacX.framework
    XSKey.framework
    iLifeFaceRecognition.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    Flip4Mac WMV Plugin.webplugin
    JavaPlugin2_NPAPI.plugin
    JavaPluginCocoa.bundle
    NP-PPC-Dir-Shockwave
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    Silverlight.plugin
    flashplayer.xpt
    nsIQTScriptablePlugin.xpt
    /Library/LaunchAgents:
    at.obdev.LittleSnitchNetworkMonitor.plist
    at.obdev.LittleSnitchUIAgent.plist
    com.adobe.AAM.Updater-1.0.plist
    com.adobe.CS5ServiceManager.plist
    com.parallels.desktop.launch.plist
    net.culater.SIMBL.Agent.plist
    org.thebends.iphonedisk.mobile_fs_util.plist
    /Library/LaunchDaemons:
    at.obdev.littlesnitchd.plist
    com.adobe.SwitchBoard.plist
    com.apple.aelwriter.plist
    com.apple.qmaster.qmasterd.plist
    com.apple.third_party_32b_kext_logger.plist
    com.mysql.mysqld.plist
    com.orbicule.uc.plist
    com.parallels.desktop.launchdaemon.plist
    com.rogueamoeba.hermes.plist
    /Library/PreferencePanes:
    Apple Qmaster.prefPane
    Flip4Mac WMV.prefPane
    Growl.prefPane
    MacFUSE.prefPane
    /Library/PrivilegedHelperTools:
    /Library/QuickLook:
    ParallelsQL.qlgenerator
    iWork.qlgenerator
    /Library/QuickTime:
    .DS_Store
    AppleAVCIntraCodec.component
    AppleHDVCodec.component
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    AppleProResCodec.component
    DVCPROHDCodec.component
    DVCPROHDMuxer.component
    DVCPROHDVideoDigitizer.component
    DVCPROHDVideoOutput.component
    DVCPROHDVideoOutputClock.component
    DVCPROHDVideoOutputCodec.component
    DesktopVideoOut.component
    FCP Uncompressed 422.component
    FLV.component
    Flip4Mac WMV Advanced.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    IMXCodec.component
    LiveType.component
    XVIDDelegate.component
    iChatTheaterPreview.component
    macam.component
    /Library/ScriptingAdditions:
    Adobe Unit Types.osax
    SIMBL.osax
    /Library/StartupItems:
    ParallelsDesktopTransporter
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.google.GoogleContactSyncAgent.plist
    com.google.keystone.agent.plist
    Library/PreferencePanes:
    Hazel.prefPane
    Library/QuickLook:
    AnimatedGIF_QL.README.rtf
    AnimatedGIF_QL.qlgenerator

  • Can't connect to the internet

    Ok. so i did a search and didn't come across any other problems like the one I'm having.
    Let me start off by stating that my laptop is an ibook g4 bought feb, '06 (yes the apple care just ran out).
    I'm having a problem connecting to the internet on my ibook, running through a d-link wireless router. I'm using my imac to connect to the internet currently (which works fine by the way). It also is connected through the wireless router.
    My ibook has a strange ailment. I open up Safari and all I get is a blank screen, the page is trying to load but the status bar is going no where and does the same in Firefox. So first, I opened Network diagnostics, but the computer freezes and I have to do a hard shutdown. (holding the power button). Next, I tried Disk utility. Verified Permissions, Repaired Permissions, everything is fine. I tried to Verify Disk, and again the computer freezes, will not let me force quit and I am forced to do another hard shutdown. I do the thing where you hold down some key while you're starting up to get into the disk utility so I can repair the disk. This returns clean as well. I downloaded techtool off of my Applecare disk. Did the tests, everything passes. So what's the deal?? I've tried to reset the pram. I even did the Apple Hardware test, everything passed.
    I thought it could be my Airport card? It recognizes that there is an internet connection in the top right corner, I even have great signal strength (mostly because I've tried this sitting right next to the router). But still, I can't connect to the internet. Any one have any ideas? I don't know what else to try! Please help!

    so i can't believe i didn't try to connect it directly to the router with the ethernet cord. This actually worked. But it still didn't solve my wireless problem. I'm not willing to let my laptop become a desktop. I'm already wired to a plug b/c the battery is slowly dying and has a life of about 5 minutes. I'm not willing to give up my wireless internet too.
    I guess now it's got to be the airport card? how do I confirm this? and if it is how much would a new one cost and can I install it myself??

Maybe you are looking for