Acrobat Professional 11.0.10 - download in one file possible?

Hello,
I would need the latest Acrobat Professional 11.0.10 as one download. In the download area I can only find an older version which would need to updated seperately after the installation. Is there a possibility to download the latest version as one file?
Thank you and best regards,
René

Hi Rene ,
Please refer to this link ,
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
See if this helps and let us know .
Regards
Sukrit Dhingra

Similar Messages

Help!My Acrobat XPro crashed after I downloaded a pdf file but it saved itself as .ASPX

Hi,
As said, I downloaded a pdf file from web and liked to save it , but it saved itself as .ASPX. I was unaware of this, then I found the saved files could not be opened by XPro, and within second, the XPro failed to boot up.
I uninstalled the program, used the cleaning software, and tried to reinstall Acrobat X again. But this time, it did not work!
Very frustrated!! The disk showed that I had the XPro installed and did not enable reinstallation.
Please help, my assignment due day is coming!!!
Attached the summary report:-
Many thanks in advance!
hkjhht

From the screen shot of your install log it appears you received a 1603 error. Please try the steps listed in Error 1603 | Install | CS5 products - http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html.
You may also want to review your install logs in greater detail by following the steps listed at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
Finally your initial issue sounds more like an issue with the site you were trying to download the PDF from. Instead of offering you a PDF they offered you an ASPX file. I would try a different web browser once you have Acrobat reinstalled. It is either an issue with the site or your web browser. Try a different web browser if the problem continues.

I need to install Adobe Acrobat plug in to enable download of PDF files

I run an Apple Mac OSX Version 10.7.5 Please advise me which version of Adobe Acrobat plug in I need, to enable me to download PDF files, which an Australian Gov. dept says I need

Either download ther trial version of Acrobat and install it or use the free Adobe reader.
Mylenium

Adobe acrobat 3D version 8 need download of exe file.

I own a registered version of this, but I need the download to reinstall it.

I had downloaded it originally.. Recently the account had to be started from scratch with a new email address that I have, so whatever was there originally is now gone. I had saved the original exe file, but it got corrupted at some point. I can't believe that Adobe does not have the original exe file tucked away somewhere. The internet is peppered with botched up versions of it, all tied up with malware and adware, trogans and other crap. Does anyone have an exe file that they could share?

Progressive download of SWF file - possible?

With FLV files, it is possible to have progressive downloads.
In other words, while a part of the video is playing, the rest of
it is downloading.
I want to have SWF files that contain frame based animations.
Does Flash work the same way for SWF files also? In other words, is
it possible to play part of SWF file's frames, while the rest of it
is downloading, or does it need to be fully downloaded first and
only then start to play.
Thanks for your help in advance!
hkundra

> I want to have SWF files that contain frame based
animations. Does Flash work
> the same way for SWF files also?
Yes, it works the same. Loading from the first frame to last
in the order they come.
But, take note, if you place animation inside a movie clip
and that clip is on frame
(example) 10, it will need to stop on that frame and load the
entire movie clip to
progress to the frame 11. So the streaming and progressive
loading happens only if your
content is spread across main timeline.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Image Editing in Acrobat Professional 8.1.2

I am running Acrobat 8.1.2 under XP Professional Version 5.1.2600 Service Pack 2 Build 2600.
I am trying to edit images in a file I downloaded from the web to reduce the file size. The images are ones that thumbnails on an earlier page access to show a larger sized image.
The images are slightly too long to fit on one page, so most of the image appears on page 1 and then the bottom portion on the top of page 2. There are text boxes separating the images.
Is there a simple way to edit these images to make them small enough to fit on a single page in Acrobat?
I managed to select each one and drag the corners to make them ~the same size and small enough for one page, but I cannot seem to move the bottom part so that I can merge it with the major part.
It is not clear to me if this is an artefact of the downloading process or not. Perhaps I could adjust some parameter so that the images all fit properly when downloaded?
I'll be glad to create a small, 2 page Acrobat file illustrating the problem. I don't see a way to post it here, though?
Thanks for any insights.
John

Thank you Bill and Aandi for your comments.
I see I should have said a bit more.
In Acrobat Professional 8, I used the menu path File>Create PDF>From Web Page. I specified that I wanted to drill down 2 levels.
That accomplished what I wanted. I captured the images and the linked images. I captured a whole lot more, but that was easy to delete in the Thumbnail View. I then deleted all the superfluous bookmarks and any unwanted text from the homepage. Now I have a PDF which is just under 10K and might pass muster for an email attachment. Clearly if I could condense the linked full size images to single pages, the file should become significantly smaller.
Perhaps it makes a difference, but my browser of choice is Mozilla SeaMonkey 1.1.9.
Acrobat 'does everything for you transparently' so it is not evident if it uses Mozilla, or if it uses its own software to open a web page and capture it. Does anyone reading this know more about the process?
Thanks,
John

Accessibility in Acrobat Professional 8- MAC platform

I am having issues in Acrobat Professional 8 in the accessibility section. I have a document that was originally created in InDesign CS3, then exported as a PDF and opened in Acrobat Professional. After opening I go to File- Properties and set the language as English US. Then I go to the Advanced menu to Accessibility- full check and select the Name under Checking Options to be "section 508 Web-based intranet and internet information and applications (1194.22) and make sure that all the boxes are checked. Then I hit "Start Checking". A message dialog appears that says, "The checker found problems which may prevent the document from being fully accessible." I then click "Ok". It brings me back to my document. The accessibility report opens on the left hand side. Under summary it says, "The checker found problems which may prevent the document from being fully accessible.
(a) Passed automatic verification
(b) Not applicable
(c) Needs manual verification by user
(d) Not applicable
(e) Not applicable
(f) Not applicable
(g) Passed automatic verification
(h) Passed automatic verification
(i) Not applicable
(j) Not applicable
(k) Not applicable
(l) Not applicable
(m) Not applicable
(n) Passed automatic verification
(o) Not applicable
(p) Not applicable"
It doesn't tell me what needs to be fixed. Has anyone ever run into this issue? Or have any suggestion on how to fix it? My document needs to be 508 Compliant.
Thank you,
Jessica
I can be contacted at [email protected]

Probably each cover page is different too. I would probably just bite the bullet and do each individually. I would create the 2 cover pages in WORD or other word processor and print to cover.pdf. Then open a PDF and Pages>Insert Pages or the cover.pdf to the front of the open PDF and save as to the current PDF. Then repeat 299 times. Each time you would make the appropriate change to the DOC file and print a new cover.pdf file (you might want to turn off open in Acrobat for this processing in the printer properties to save time). Probably a good idea to keep a list of the files to check off what has been done (you can generate a list in DOS by Start>cmd, change the directory to your location [cd path], and do "dir >>list.txt". That will give you a list to use.). There may be an easier way, but by the time you get it figured out you might be done this way.

Acrobat Professional 8.0 Truncating PDF File Names

Recently did a full install of Professional 8.0. Existing PDF files open OK, but 'blue bar' at top of screen identifying file name shows only the 'Acrobat' logo and the first letter (not word) of the file name. Upon closing the file, the 'blue bar' continues to show only the 'Acrobat' logo and the letter 'A' (presumably the first letter of the words 'Adobe Acrobat Professional', which normally appears in the blue bar when Adobe Acrobat Professional 8.0 is running, but no files are open. Thoughts? Suggestions? Thanks.

thanks...
http://www.economycard.net
http://www.5579021.com
http://www.kurtoglunakliyat.com

Payment Order (multiple) Idocs need to be downloaded into single file

Hello Gurus,
I am able to generate Idocs for Automatic Payment Run in F110 for message type PAYEXT with PEXR2002 idoc type. However, what I found is the system generates one idoc per vendor for a single payment method. So, for example if I run APP for 50 vendors at a time, 50 different idocs are generated and placed in AL11. Currently the requirement is to download the idocs into flat file and upload it in Bank's website. I would like to know is there any way to download all the 50 idocs into a single file (ie a single file containing payment run information for all vendors).
PS: I use CG3Y Tcode to dowload Idoc from AL11 mentioning the directory path but this can allow me to download only one file at a time.
Any Info regarding this would be appreciated.
Thanks in advance,
-Naryanaan-

Hi
I'm facing the same problem . Were you able to solve this by heavy customization.
best Wishes

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I used "Migration Assistant" to send everything from my old mac to my new which included my copy of Adobe Acrobat 8 Professional. I tried downloading an update but when it asked me to find the version of acrobat to replace it was grayed out and I was unable to select it. My OS is 10.9.4

Where can i download Acrobat Professional 7 from?

Hi,
I am trying to download Acrobat Professional 7. I have the license for 7 but i don't have the setup files.
Can any one please help me download the setup.
Thanks
Anuj

Thanks Bill,
so you r suggesting that i should contact adobe people directly and show the ownership of the product?
is there any other way of contacting them apart from calling them?
Thanks,
Anuj

My computer crashed, I have a new computer, how do I download Adobe Acrobat Professional (I have the serial key)

My computer crashed, I now have a new computer, how do I download Adobe Acrobat Professional (I have the serial key)

http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. You may have to work with Adobe (maybe chat) to resolve the number of activations. They are the ones who can reset it if needed.

New computer. Old one defunct. How do I reload Adobe Acrobat Professional?

New computer. Old one defunct. How do I reload Adobe Acrobat Professional?

Do you have the disc or download available? What is the version of Acrobat?
~Sandeep V.

Acrobat Professional 9.2 and Epson Artisan 810 All-in-One

Acrobat is unable to initiate a scan from my new Epson Artificat all in one. I previously had an HP 6300 series all in one and had no problems with this device. My O/S is Windows 7 Professional.
I am able to initiate a scan from Adobe Photoshop Elements 7.0 (along with other programs), so the problem is not with the device installation. I can also scan to a PDF from the device, or using the device's native scanning program, just not from inside of Acrobat.
When I try to scan, I get a message that Epson Scan cannot be started (from the Epson program, follow by an Acrobat message box saying that "Either the scanner driver is not installed, or thescanner is not connected". Both are wrong - drivers are installed, and the scanner is connected via Ethernet connection to my router.
I also clicked on Configure Presets and selected the scanner from the drop down list (it is the only choice). I got the same Epson error message, followed by an Adobe message box saying "Acrobat could not communicate to this device".
This is happening on my Gateway laptop. Strangely enough, I also installed the same Epson software to a desktop comouter (actually did this install first) which also has Acrobat, and it works fine in this computer.
Finally, I treied uninstalling and reinstalling Acrobot, but the problem persists. I have also tried uninstalling and reinstalling the all-in-one software and drivers, but to no avail.
Frankly, I am at a loss - I would think that it is an Acrobat problem, but it works with the same program on a different PC. For the same reason, it does not seem to be problem with the Epson driver or software.
Any suggestions will be appreciated.

The drivers were downloaded from the Epson web site this morning.
This would not be so frustrating if I did not have two machines running the same version of Acrobat Professional, with the same scanning drivers, and the same version of Windows. You'd think if it works in one setup, it should work in the other, but this does not seem to be the case.

I bought last week (Adobe Acrobat Professional XI) through the website and I received an e-mail to confirm the purchase, but so far I have not got any mail to be able to download the software My order number: MENA 9723990859

I bought last week (Adobe Acrobat Professional XI) through the website and I received an e-mail to confirm the purchase, but so far I have not got any mail to be able to download the software
My order number: MENA 9723990859

you can download and start your 30 day trial any time. when your serial number arrives, you can activate your trial to the time-unlimited version.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Acrobat Professional 11.0.10 - download in one file possible?

Similar Messages

Maybe you are looking for