Acrobat Professional Version 10

How do I reinstall Adobe Acrobat Professional Version 10 after my computer crashed? I have the serial number but no place to enter it.

Hi KRKCHKNDK
If you have the disc, install it again and put the Serial Number During installation or once it is installed, go to help->Activate and activate it ...
If you don't have a disc or setup files , plese download them from the below link : http://prodesigntools.com/adobe-cs6-direct-download-links.html
Follow the instructions to start your download ....
Follow the same above procedure to activate it ....

Similar Messages

Adobe Acrobat Professional version 9

We are running Acrobat professional version 9, would like to install the update 9.3, do I need to install the prior updated first and can I just install 9.3? Please advise.
Thanks

Depending on the version that you currently have, you must step up versions. 9.0 to 9.1 to 9.2 then finally to 9.3. In order for us to get to 9.3, we had to install 9.2 first (we were on version 9.1.3). If anyone has a better method that would save time, but I do not know of any easier methods at this time. Perhaps someone could bundle all the updates into 1 MSI installer.

Cascading implementation of Acrobat Professional versions fails because chain is broken

I, finally, decided to move from Windows XP to Windows 7 Professional. This move requires re-implementation of software, including re-implementing Acrobat Professional 8 (shorthand: A.P.8).
Now A.P.8. came to me as an upgrade to A.P.7 which came to ma as an update to A.P.6. I'm not sure if A.P.6 came to me as an update of A.P.5. Anyway, I lost the CD for A.P.6. Now I'm stuck. Being a home user, I hesitate to buy the upgrade to A.P.11 which I couldn't install anyway because I cannot install A.P.8.
In My Account, there is a registration of my purchase of Acrobat Professional, starting in 2002 with A.P.4
ADOBE support let'sd me down at the moment because I didn't any means to communicate directly with ADOBE. So now I post this question here to the ADOBE community.

Thanks Ned, I chatted with one Adobe's consultant (your first link is not
applicable for Acrobat versions before version 10). The solution is simple.
Start implementing Acrobat 8; when no qualifying software is detected, input
the key of the previous version (in my case version 7) and the installation
runs smoothly.
Thanks again for your assistance!
Regards,
Marien

Where can I download adobe acrobat professional version 7.0 for mac

thanks!

Hey Greg,
Before you download Acrobat pro for your MAC, you might refer this KB doc link to understand the system requirements for Acrobat 7:
System requirements | Acrobat family of products
You might install Acrobat 7 from the link mentioned below:
Adobe - Acrobat Professional : For Macintosh : Adobe Acrobat 7.0.1 Professional update - multiple languages
Regards,
Anubha

Can not edit text in a PDF with Adobe acrobat professional version 8

I have a PDF doccument that I can not edit any of the text on. all it lets me do is slide the pages around like images but dose not allow me to delete or add any text. It is not password protected at all.
Any ideas on why this is and how to fix it so I can edit this 40 page pdf?
Thanks,
Tim

Document > OCR Text Recognition > Recognize Text Using OCR
In the Recognize Text dialog, click the "Edit" button.
In the Recognize Text - Settings dialog the middle entry has a drop-down menu.
From this menu you can select one of three PDF Output Styles.
--| Searchable Image
--| Searchable Image (Exact)
--| Formatted Text & Graphics
These output styles are discussed in Acrobat Help.
Be well...

Form designing for compatibility between Acrobat Reader 7 and Acrobat Professional

I have designed a Form using LiveCycle Designer 7.0. It contains a few subforms and lot of javascripting. One of the javascript logic I am using is to display a subform when a user clicks a radio button and hide it when the user clicks another radio button. The subform contains Text field, Numeric field, Rectangle, Line, Button. This worked well with Acrobat Reader 7.
After I installed Acrobat Professional 7, my form breaks. I did a quick test to see where it breaks and came out with the following conclusion.
1. If the subForm contains an Image, Line, Rectangle or Circle control, the subForm rendering throws error (Adobe Acrobat 7.0 has encountered a problem and needs to close) when I click on the radio button to display the subform.
2. If the subForm contains Text control, it is displayed even if subform is invisible.
3. If the subForm contains Checkbox, Radio, Dropdown list, List Box, Button, Submit By Email, Submit, Print Form, Reset Form; these controls are never displayed even if subform is visible.
Has anyone encountered a similar issue?

Hi Dave,
Thanks for the response.
I need some clarification. When you say 7.0.5 version, are you expecting 7.0.5 version of Reader or Professional?
Here's the steps I followed:
I originally had Adobe Designer version 7, 0, 041126, 0 and Acrobat Reader 7.0.5 and everything worked great.
Now I have uninstalled Designer and Reader and installed
Acrobat Professional Tryout. This installs Acrobat Professional version 7.0.0 and Adobe Designer version 7, 0, 041126, 0 (which is the same as above). Now the same forms which were working earlier are not working as expected.
Please note that I have NOT installed Acrobat Reader 7.0.5. How do I find out what version of Reader does Designer user for PDF preview?
If I separately download Acrobat Reader 7.0.5, how do I tell Designer to use that version for PDF preview?
Thanks,
Satish

Acrobat Professional hangs when converting word to PDF

I am using Acrobat Professional version 7 and when i use the Convert to PDF option for a large word document it goes through the motions of converting the document but then seems to hang and i get no PDF document created. Also the Word document then says read only in the title as well.
It works fine for small word documents just not large files with pictures.
I have tried uninstalling Acrobat Prof and Office 2003 and re-installing both and it makes no difference.
Can anyone provide any information on what i can try to fix this issue as
i am out of ideas.
Thanks
Lawrence

Empty the TEMP folder or print to the Adobe PDF printer. The latter might be worth trying to be sure things are working.
You may have to uncheck a lot of the options in the PDF Maker preferences, particularly tags. Keep in mind that large graphics require a lot of disk space in the translation as the PS format is not very memory efficient for graphics (at least from what I have seen). You might also make a copy of the DOC file and then select a graphic and choose format. In the lower left corner of the general tab is a compress button. Try that to reduce the graphics resolution and see if that solves the problem.

Silent install for adobe acrobat professional verstion 8 how to.

Hi Guys,
I need to perform of adobe acrobat professional version 8 silent install for mass deployment of windows 7 purpose. but i cant find a customization wizard that works on my professional version 8 . i have tried version 10 and 11 and its not working. please help...
Thanks,
Raymond

There might have once been a deployment solution for this, but I imagine Adobe will have withdrawn it. Why on earth are you deploying a product so far past end of life, with unfixed security issues?

Is it ok to instal older versions of Microsoft Office 2008, Adobe Acrobat Professional 8.0, Adobe CS3 on a MacBook Pro Retina running Mountain Lion?

Is it ok to instal older versions of Microsoft Office 2008, Adobe Acrobat Professional 8.0, Adobe CS3 on a new MacBook Pro Retina running Mountain Lion?

Is it ok to instal older versions of Microsoft Office 2008, Adobe Acrobat Professional 8.0, Adobe CS3 on a new MacBook Pro Retina running Mountain Lion?

Contact Adobe for support. Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows.

I reinstalled my Adobe Acrobat 6.0 Professional only to get the message "Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows" when I tried to run the program. I am using Windows 8.1 on a Dell laptop PC.
How do I fix this problem?

Buy a new version, currently at 11, 5 versions since your 6..

64-bit version of Acrobat Professional X

Can not seem to find a 64-bit version of Acrobat Professional X? Can someone please provide me with a link if there is one?

Acrobat X Pro works fine (the 32-bit version). I was looking for a 64-bit version so when I use IE 9 (64-bit version) I can access the BHO (Browser Helper Object). The BHO only shows up when I use the 32-bit version of IE9. The only other option I can think of is to update the registry to show the BHO with IE9 (64-bit) as well, but I'm not sure if that is possible or how I would accomplish that. If Acrobat XI has a 64-bit version available, I'll just make the upgrade.

Using an adobe acrobat professional lic for a standard version.

I have a question in regards to EULA. I have 10 machines and 5 acrobat std lic and 5 acrobat professional lic. Can i use the professional lic and install standard on those machine only. for example can i install acrobat standard on all ten machine even though i have 5 lic for standard and 5 for professional. I know professional and standard have different .exe files. but can a professional lic be used as a standard lic. meaning can i downgrade

I don't have an answer to this particular case, and I am not a lawyer,
but in general the answer would be no: rights to downgrade would have
to be explicit, as no rights not granted by the EULA apply (unless
additionally granted by law).
However, Adobe Customer Service might be willing and may be able to
grant permission.
Aandi Inston

PDFs look different in Adobe reader and Acrobat professional compared to the built in PDF viewer on windows 8

Hi there,
I have been trying to narrow down an issue we have been having for some time in printing PDF files and finding that they look different on paper compared to screen. Up until today our big KIP plotter got the blame, but as I have been collecting notes on a little windows 8 tablet I noted that PDFs opened in the windows PDF viewer have the same visual defects as the printouts. My example today is that on a CAD drawing there is a small box/frame with a number in their, I tried printing and the frame was completely blacked out. As a test I tried saving the PDF as a TIFF file from Adobe Acrobat professional and this file had the same fault as the printed copy. When I open it in the windows 8 pdf viewer I can see that there is a shading within this box that does not show on Adobe Reader (latest version 11.0.10.32), the adobe reader and acrobat pro version both show a white background to the box. We have been having lots of issues with sections being missing from drawings and overly feint lines.
I am not sure where to start trying to narrow down why we are getting different results in different PDF readers. Is there anyone who maybe able to point me in the right direction? It almost feels like the shading or colour density is not being consistent when PDFs are being opened in different packages.
Thanks in advance
Andy

Some PDF viewers comply with the PDF ISO Standard (ISO 32000) "just enough" while others (such as Adobe's) fully comply.
As with anything there's a cost to using anything that comes from a "just enough" approach.
Be well...

Failed to upgrade acrobat professional 7.0 to 7.1.0

I found the problem while I install acrobat professional 7.0 on Windows 7( 64 bit version), Adobe PDF port & printer was not created. So I tried to upgrade my acrobat professional 7.0 to 7.1.0, but I met the same problem. - please refer to the image below - If any more information, please feel free to ask me.
Thanks,
Xelloss

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:14:25 -0700
From: [email protected]
To: [email protected]
Subject: Re: Acrobat Professional 7.0 not able to PDF documents
Yes! Thank you. I played around with it some and found that is the case, that I can PDF through the printer as well as bring the application up. I suppose it's just not install-able in full because it just cannot link up with Windows 7 in any capacity.
That's all the ability that I need at the present time. Nothing special, just whether it can or can't. Thanks!
>

Adobe Acrobat Pro Version 8.2 and Version 9.X Forms

If I created a form in Adobe Acrobat Professional 8.2 why can't I open the form to make changes to the field name in version 9.X. The ability to change names for the fields is greyed out.
Please help!!!

pwindsor wrote:then it was opened in Adobe Acrobat 8 professional and the fields were given names.
I guess that's what I'm asking. How was this done? Were the form field tools in Acrobat used or did you use Form>Create new form?
Using the latter actually uses LiveCycle Designer (it's integrated in to Acrobat). If that's the case, the form fields are no longer editable in Acrobat itself. You need to continue to use LiveCycle Designer.
Sory if this seems like a silly question but the reason I ask is because many people having this issue have used Designer unknowingly and thought they were using Acrobat (since one is accessed through the other).

Acrobat Professional Version 10

Similar Messages

Maybe you are looking for