Acrobat Reader 5.05 und Fundstellen highlight

Hallo,
wie ich aus der Doku entnehmen konnte, kann der Reader mit dem EWH PlugIn wenn er als Browser PlugIn laeuft Fundstellen markieren.
Kann man diese Moeglichkeit auch ohne Browser mit dem Reader als AktivX Control unter VC++ nutzen?
Ich suche dringend eine Moeglichkeit fuer die Anzeige einer PDF-Seite im Reader "on the fly" Fundstellen highlight zu benutzen. Notfalls muesste die PDF Datei mit einer C++ Library eingelesen und korrigiert wieder dem Reader uebergeben werden. Das ist aber zu Aufwendig. Das Acrobat Paket hat eine Fundstellen Schnittstelle ist aber fuer den Einsatz bei jedem Client zu aufwendig bzw. in den Kosten zu hoch.
Gruss
Ingo Stahl

Hi!
If you like to print PDF documents, it's not recommended to use the pdf.ocx. This control is not supported by Adobe and doesn't support a real silent printing any more. Since version 5.05 it will always show a confirmation dialog.
If you like to use an ActiveX control for printing PDF documents, you might have a look at PDF PrintController. An online demonstration as well as a demo version is available at http://www.pdfprintcontroller.com.
Regards,
Michael
[hinkel:stone]
Technology Consulting
Software and Web Development
Client/Server Technologies
E-Mail: mhi(at)hinkelstone(dot)com
http://www.hinkelstone.com
http://www.jread.org

Similar Messages

Acrobat Reader 7.0 und ActiveX in Director

Acrobat Reader 7.0 verfügt nicht mehr über
"pdf.ocx". Leider funktioniert deshalb meine mit Macromedias Director programmierte Anwendung nicht mehr richtig.
Wie kann ich das ActiveX-Modul von Acrobat Reader 7.0 ansprechen?
Warum funktioniert die LoadFile Methode nicht mehr?
Kann ich pdf.ocx trotzdem auf dem System registrieren, auch wenn Acrobat Reader 7.0 installiert ist?
Ekki Makosch

Unfortunately, I've had no response to my post as of yet.
Interestingly, I was playing around with it a little further. I was finally able to get acrobat reader 7 to start but only under the following conditions:
- I created a new user with no files in the home directory
- I logged in remotely via ssh and set my DISPLAY
- I was then able to bring up acrobat reader 7. v8 still hangs right after the GUI comes up.
I tried unset'ing all of the environment variables as my normal user and setting only the ones defined in the working environment above. v7 still would hang.
I tried 'su - newuser' but v7 would still hang.
I tried 'ssh newuser@localhost' and v7 would start.
I tried logging in via ssh as my normal user and v7 hangs.
Again, I'm stuck as to where to go from here.
-B

AktivX Control Acrobat Reader 5.05 und VC++

Hallo,
die Integration des Readers als AktivX Control in ein VC++ Projekt geht mit der Version 5.05 nicht mehr ( 4.0 war noch ok).
Es kommt die Fehlermeldung, das die Datei pdf.ocx nicht goeffnet werden konnte, weil sie keine gueltige TypeBibliothek enthaelt.
Der Fehler ist unter NT4 SP6 und W2K mit
VC++ SP3 und SP5 gleich.
Was haelt eigentlich VB von diesem OCX,
funktioniert das etwas mit VB?
Kennt jemand das Problem?
Zusaetzlich ist der Installer buggy, in der Registry wird das Control mit Verzeichnisnamen, die auf 8.3 Konvention gekuerzt sind teilweise eingetragen. Das funktioniert aber unter NT4 SP6 nicht sauber.
Gruss
Ingo Stahl

Hi!
If you like to print PDF documents, it's not recommended to use the pdf.ocx. This control is not supported by Adobe and doesn't support a real silent printing any more. Since version 5.05 it will always show a confirmation dialog.
If you like to use an ActiveX control for printing PDF documents, you might have a look at PDF PrintController. An online demonstration as well as a demo version is available at http://www.pdfprintcontroller.com.
Regards,
Michael
[hinkel:stone]
Technology Consulting
Software and Web Development
Client/Server Technologies
E-Mail: mhi(at)hinkelstone(dot)com
http://www.hinkelstone.com
http://www.jread.org

Drucken mehrerer PDF-Dateien mit Acrobat Reader 6

Wenn ich mehrere PDF-Dateien im Windows-Explorer auswähle (z.B. 20 PDF-Dateien) und über das Kontext-Menü ausdrucke (Rechtsklick + Menüpunkt <Drucken>), dann werden nicht alle PDF-Dokumente ausgedruckt. Der Acrobat-Reader wird gestartet und es werden manchmal nur 10, manchmal auch 12 oder mehr PDF-Dateien ausgedruckt. Meistenens aber nie alle. Eine Fehlermeldung erscheint nicht! Das gleiche Problem tritt auf, wenn ich aus einer VB6-Anwendung mit der ShellExecute-Anweisung mehrere PDF-Dokumente hintereinander ausgeben will. Bei der ShellExecute-Anweisung verwende ich die "printto"-Aktion des Dateityps PDF. Das Problem ist bei uns auf mehreren Rechnern nachvollziehbar (WinXP, Acrobat Reader 6.0.2). Mit Acrobat 5 gab es dieses Problem noch nicht. Ich habe bereits geprueft, ob DDE hier eine Lösung bringt: Die DDE-Message <FilePrintToEx> hat aber den Nachteil, dass bei jedem PDF-Dokument, welches gedruckt werden soll ein Dialog vom Acrobat Reader angezeigt wird. Eine DDE-Message <FilePrintToSilentEx>, die den Dialog unterdrückt, existiert leider nicht. Und die DDE-Message <FilePrintSilent> gibt die Datei immer nur auf den Standarddrucker aus und ist damit auch nicht brauchbar. Ist dieses Problem bekannt ? Kann das vielleicht jemand nachvollziehen ? Hat jemand eine Idee, wie das Problem umgangen werden kann. Rainer Schmidt SBS

Hi Rainer,
wir haben ein ActiveX Control entwickelt, mit welchem beliebige PDF Dokumente auf einem programmatisch wählbaren Drucker ausgegeben werden können.
Online-Demonstration und Demo-Version sind unter http://www.pdfprintcontroller.com verfügbar.
Viele Grüße
Micha
[hinkel:stone]
Technology Consulting
Software and Web Development
Client/Server Technologies
E-Mail: mhi(at)hinkelstone(dot)com
http://www.hinkelstone.com
http://www.jread.org

Is there the way to use "Highlight File Format" with Acrobat Reader 9.0 or later?

hi
Do anyone know the way to use "Highlight File Format" with Acrobat Reader 9.0 later or substitutional way to highlight a PDF file as well as highlight file?
I want to highlight some words by indicating character's location(from n to m) using Acrobat Reader 6, 7, 8, and 9.
I use highlight xml file to highlight words in Acrobat 6, 7, and 8.
http://www.adobe.com/devnet/pdf/pdfs/HighlightFileFormat.pdf
According to this documents, "External Window Handler Plugin" is required to use highlight file.
But I cannot find this plugin in Acrobat Reader 9.
So Acrobat Reader doesn't recognize highlight file.
Well, I know that there is another way to highlight pdf file. It is called "PDF Open Parameters".
However this parameters cannot indicate location of characters but words which is to be searched.
This parameter does not work perfectly to substitute a highlight xml file.
To satisfy what i want to do, the best solution is that Acrobat Reader 9.0 recognizes highlight xml file.
But I think it is impossible because of lack of plugin.
Do anyone know the way to recognize a highlight xml file to 9.0 or another way to highlight some words?
thanks,
Asatamax

The feature is disabled by default in reader 9
(1) Open Adobe Reader
(2) Click Edit > Preferences > Search, and
(3) check the box labelled Enable search highlights from external highlight server.
(response found here: http://support.dtsearch.com/dts0117.htm)
I can't imagine why Adobe choose to disable it. It's a bad joke for us at UNESCO (http://unesdoc.unesco.org)

Forcing on Highlight Fields upon Open and Saving in Acrobat Reader

I'm using the Actions panel in the Page Properties to turn on the Highlight Fields when my PDF document is opened using:
if (!app.runtimeHighlight){
app.runtimeHighlight = true;
and this works perfectly, however this document is being viewed mostly in Acrobat Reader. In order to allow my users to save the content in the forms I turned on, "Extend Features in Acrobat Reader".
The first time this new file is opened, the field highlights turn on, however after content is saved to the forms and the document is resaved the Highlight Fields no long turn on when the document is opened.
How can I utilize both of these options even after the file is resaved?
Thanks

It should work better if you add this script as a document-level script, instead of a pageOpen script.
However, keep in mind that you are changing an user's preference setting, which is considered to be not so nice.
Hope this can help.
Max Wyss.

Hintergrundfarben von INDESIGN werden beim exportieren in Acrobat X nicht angezeigt und nicht gedruckt, wohl aber im Acrobat reader

Hintergrundfarben von INDESIGN werden beim exportieren in Acrobat X nicht angezeigt und nicht gedruckt, wohl aber im Acrobat Reader. Kann mir jemand sagen wo der Fehler liegt?

Danke, das du dich meldest! Im Anhang 2 Screenshots.
Exporteinstellungen waren aus AI oder ID einfach PDF-X3 oder -X4 oder einfach ”standard”, habe alles mögliche
ausprobiert. Ich habe auch eine .ps -Datei geschrieben und auf den Distiller gezogen = gleiches Problem.
Zu Ebenenpalette: hm, wüsste nicht, was da falsch eingestellt sein könnte...

Installation Acrobat Reader und Flash: Pakete zwischenspeichern

Hallo,
ich möchte die aktuellen Versionen von Acrobat Reader und Flash auf drei verschiedenen PC installieren:
ein PC läuft unter Windows 7 64bit, der zweite unter XP 64bit und der dritte unter XP 32 bit.
Bisher habe ich über einen Installer die Software geladen, z.B. install_reader10_de_mssd_aih.exe
Kann ich die Software auch auf Vorrat herunterladen, auf einen Stick übertragen und dann auf den
genannten PC installieren?
Schöne Grüße

Die reinen Installationsdateien kannst du von FTP Server laden.
ftp://ftp.adobe.com/pub/adobe/reader/win/

Es ist ein Problem mit Adobe Acrobat/Reader aufgetreten. Beenden Sie Adobe Acrobat/Reader und ....

Hallo
Bekomme beim Öffnen von PDF-Dateien auf bestimmten Webseiten die Meldung Es ist ein Problem mit Adobe Acrobat/Reader aufgetreten. Beenden Sie Adobe Acrobat/Reader und versuchen Sie es erneut. Haben schon den Adobe Reader deinstalliert und neu zu installiert, das Problem tritt aber weiterhin auf. Da Problem scheint aber nur im Browser aufzutreten. Gehe ich zu Adobe Reader > Bearbeiten > Voreinstellungen > PDF im Browser anzeigen und nehme dort das Häkchen raus, funktionierts zwar, aber eben nicht im Browserfenster. Eine Idee was das Problem sein könnte?
Danke und Grüsse

Internet Explorer. Das Problem tritt aber nicht immer auf, nur bei einzelnen Websites. Was soll ich an den Sicherheitseinstellungen ändern (habe diese bis jetzt nicht verändert seit ich den Computer habe)?
Danke und Grüsse
P.

SWF Export, no font showing in Acrobat and zoom border problem (Acrobat & Reader) - Indesign CS6

Hi Everyone,
If anyone could help me on this that would be great, I've spent hours on the forums and manuals to no avail.
I'm making an interactive PDF brochure in Indesign for one of our new products and I'm having issues (actual or perceived??!!) with the SWF export and PDF creation. I'm placing animations and video in the INDD, exporting it as an SWF (with the text option as Flash Classic Text) and then opening the SWF (not importing to a word doc or anything, just opening the SWF) with Acrobat using the advanced options to import the video resources and to enable the content when the page is opened. I then save the file as a PDF. In the PDF everything works as it should, the animations, the buttons, the video plays and so on. Great.. hmm not quite.
The trouble I am having is that all the content of the SWF when viewed in Acrobat seems to be getting rasterised/flattened - is this correct? After the SWF is opened, Acrobat indicates no fonts in the fonts tab in the document properties so when the SWF is zoomed in Acrobat, or the saved PDF in Reader, the font gets pixelated and the document is not searchable/text can not be highlighted. The images are not selectable either - it is as if the entire page has been flattened to one image. Is there a way to stop this so that the SWF opened with Acrobat retains the font and individual images like a normal PDF? Do I have to open the SWF in Flash first to set some parameters or something? Is there something I am doing wrong when exprting the SWF from Indesign? I think I have tried about every possible export combination. When I open the .HMTL (exported at the same time as the SWF from Indesign) in a browser, the same happens. All the animations work but the text appears to be rasterised/flattened/not searchable. Sorry if I'm not using the correct terminology.
I have tried importing the SWF back into another new INDD and exporting that as an interactive PDF but then the video does not work. I suppose I could try exporting all the individual animations as SWFs, importing them all and trying to get them to work with the video but I can see that will take quite some time and does not seem to be a guaranteed solution from what I have read on the forums - video playback being the issue.
Another problem is that when the SWF, or saved PDF, is zoomed in Acrobat/Reader between approx 150% and 210% a thick white border appears in the document and the content is squashed into the middle creating a slightly pixelated and narrow page. When I zoom out from the page I get a small white line on the right hand border at around 70% zoom. Please see images. Does anyone have any idea why this is happening and what I can do to fix it?
On another, sort of related topic, my timing panel went blank yesterday and was not showing any animations in documents that it had been used to order and synch animations on page load as well as new documents. The panel was blank. I updated to V8.0.1 and the panel sprang back into life - hope that helps anyone else finding the same problem.
I am not very familiar with Indesign/Acrobat/Flash so I guess all the above could be what I'm doing or I could be asking really dumb questions - apologies from a newbie.
Best,
Emily

Hi All,
I have now pretty much solved all the issues by creating the SWF in Flash rather than Indesign. I would advise anyone looking to create an interative PDF with animation and interactivity to go with Flash from the start. While Flash is a little more involved to create the same effects as Indesign, the extra time taken will ensure a more controllable and better looking PDF in terms of text quality, scalability and so on. Plus you will not spend days trying to get video to work along side imported SWF etc in Indesign. One of the best controls in Flash is being able to set the stage.scaleMode for the document so the PDF still looks crisp when zooming, no white borders etc. So, create the .fla, export to .SWF, open the .SWF with Acrobat, modify the advanced settings to enable start on page load and save as a PDF. If you don't know Flash, I didn't a couple of days ago, watch a couple of tutorials on Youtube.. buttons, tweens, embedding video and you'll be ready. Don't be put off by ActionScript, there are really handy Code Snippets in CS6 that do all the heavy lifting for you.
Sorry Indesign!
Best,
Em

IPad, Acrobat Reader, Content (text and pictures) no longer showing, just blank pages

Hi,
I have a user who successfully opened a .pdf attachment from outlook mail and then opened it in Acrobat Reader on the iPad and then edited it and moved it to a created folder.
Everything was working fine and the user highlighted text in the .pdf document too.
What then happened is when the user subsequently opened the file, the highlights were shown but not the content (text and pictures).
I checked they had the latest version via the apps store updates and noted there had recently been an update which had been applied.
I did check also in the diagnostics to see if there were any acrobat files, but there were none, I also turned on 'send diagnostics' in case this this will help in the future.
I rebooted the iPad by pressing and holding the power and home buttons until the apple logo appeared.
Checked again to see if I could view the .pdf content (it's around 8.5 MB file with 32 pages), still nothing showing apart from the yellow highlights that the user had done.
From within Acrobat Reader on the iPad I chose to open the file in iBooks to see if I could read it there. I could successfully open the file in iBooks and the front page thumbnail was showing (I did note that in Acrobat reader the thumbnail was white).
I found the email with attachment and opened it again in Acrobat Reader and it opens correctly, suggesting somehow the previous copy had become damaged? I have now saved this good copy over the top of the existing bad copy and all is OK except that the user has lost the highlights previously made.
Can you give me some idea of how this file has become broken in Acrobat Reader on the iPad and how I can avoid it happening again.
Many Thanks.

Thanks for replying.
This is the first time it has happened, the user has several folders containing files (on their iPad), (some .pdf's with additional highlights) these files are typically company agm board packs so contain pages of text and photo's too.
I put it down the fact that when I checked the app store for updates there had recently been an update and the user had not rebooted their iPad for some time, hence some of the underlying adobe reader files were perhaps between versions.
I don't know how you handle files when performing an update, do you close the app, flush files from memory and do a clean update?
I can confirm that the .pdf file had not been sent as an email attachment after having added the highlights.
Because the acrobat document contains so many pictures (32 pages and 8.5MB) when scrolling through it takes several seconds for some pages to appear, and others with text and pictures quite a while for the text to become sharp, I presume this is because the Acrobat Reader cannot open the 8.5MB file in one go and has to keep swapping it out of memory. Having reached the end if I scroll back to the beginning it takes 10's of seconds before the first page re-appears, otherwise it's just a white page. Interestingly in iBooks the pages appear almost immediately when viewing.
The iPad in question is model MD368B/A, 64GB, Software Version 7.1.1 (11D201) and has 28GB Memory available. Usage tells me Adobe Reader is taking 328MB and is version 11.3.1
I have just finally browsed back to recent documents, opened 2 or 3 other documents and then this one again (from recent) and it is now broken, just shows white pages (and on the thumbnail too) with my test highlights. so I can now apparently reproduce it.
Hope this all helps you re-produce
Regards,

Installation von Acrobat Reader 8.1.2

Betriebssystem: Microsoft Vista
Nachdem meine Adobe 7.0 Standard Testversion abgelaufen ist, habe ich diese deinstalliert und anschliessend versucht den Acrobat Reader 8.1.2 zu installieren.
Bei der Installation des Acrobat-Readers erhalte ich die Fehlermeldung "Error 1316.A network error occured while attempting to read from the file C:\Windows\Installer\Adobe Reader 7.0.9.msi".
Obwohl ich bereits das Programm "WinCS3Clean" ausgeführt habe, erhalte ich weiterhin diese Fehlermeldung und habe nicht die Möglichkeit, den Acrobat Reader zu installieren.
Was ist von mir zu tun? Bitte um Hilfe!!!

This forum is for FULL Acrobat - Reader forum is
http://www.adobeforums.com/webx?13@@.3bbf42f7

Acrobat Reader 10.1.3 - Nachkommastellen werden ignoriert im Browser

Plattform Windows 7
Acrobat Reader 10.1.3
Betroffenes Dokument wurde erstellt mit Acrobat Distiller 6.00 für Macintosh - PDF Version 1.6
Wenn ich ein Dokument, welches eine Tabelle enthält in der eingetragene Werte addiert werden, im Browser (Internet Explorer 8) öffne, werden diese Nachkommastellen (2 Stellen) angezeigt, aber in der Addition ignoriert.
Im Acrobat Reader ist die Funktion "PDF im Browser öffnen" aktiviert.
Es kommt keine Fehlermeldung beim öffnen des Dokuments.
Verwende ich einen anderen Browser (zB Google Chrome) funktioniert es
Öffne ich das Dokument direkt im Reader funktioniert es
Wird eine ältere Reader Version (8.x.x) verwendet funktioniert es mit dem Internet Explorer 8
Leider sind das alles keine möglichen Alternativen für mein Problem
Irgendeine Idee ob man das was anpassen kann, dass das Zusammenspiel IE8 und Reader 10.1.3 hier auch richtige Ergebnisse liefert?

Darf ich vorschlagen, dass Sie entweder einen Übersetzer wie Google verwenden, oder posten Sie Ihre Fragen im Forum in Deutsch:
http://forums.adobe.com/community/international_forums/deutsche

Unable to Print using Adobe Acrobat Reader - MacBook Pro - Wireless Environment

I have a Macbook Pro with 10.6.4 OS
My printer is the HP Photosmart C5180 All-in-One
It is connected via ethernet cable to my router (Netgear Wireless N Router) via 10.0.0.1 Wireless Setting.
I am able to print everything with any programs, except Adobe Acrobat.
When I send any files to the printer, i get the following error:
Error: pstopdffilter/pstocupsraster failed with err number 13
I uninstalled the driver, installed it (from the HP website latest driver), I'm able to get the printer to work on everything else, I'm able to print a test page, but... I can't print anything with Adobe Acrobat...........
Any suggestions? I do use Adobe Acrobat Reader a lot
This question was solved.
View Solution.

OK, let's try more thoroughly uninstalling the hp software for 10.5 using the 'scrubber' option. First, install the wrong software from the CD (for 10.5) so we can more thoroughly uninstall it. Next:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall << This is the scrubber option
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Finally, download and install the "Full Featured" Driver and Software from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Single page view mode in Acrobat Reader on android

Is there a way for a pdf to dictate the view mode used in Acrobat Reader on a smart phone? By default I believe it is set to continuous however I would like it to automatically change to single page when my pdf is opened.

Mark -
You are correct.
In Acrobat Reader on my PC, I'm highlighting text and then adding a sticky-note comment to it.
So, if I just insert a sticky note comment without highlighting the associated text in the document, I can see the sticky note when I view the document on my android device - - just tested this and it works!
OK - I can live with that, but it would be good if the combination of highlighting AND sticky notes were visible when viewin the document in Android - the highlightimg feature makes it clearer to what piece of text the sticky bote relates to. Hope it can be incorporated in a furure release.
Thanks for clarifying the situation for me.

Acrobat Reader 5.05 und Fundstellen highlight

Similar Messages

Maybe you are looking for