Acrobat Reader DC: Find the hand and select tools

Here is a problem and a solution. In Adobe Reader DC you may want to use the hand tool and the select tool. But you won't get them to show in the main toolbar, no matter how deep you dig in the Show/Hide menu.
SOLUTION: hover your mouse in the lower part of the screen to show the Page Control tools. That's where you'll see the hand and select tools.
The complete steps are:
1. Click View > Show/Hide > Page Controls, and make sure that Show Page Controls is selected.
2. The page controls will appear either on your toolbar or at the bottom of the screen.
3. To move the page controls to the bottom of the screen (or back to your toolbar), click the icon that looks like a bar with a downwards arrow.
4. You will only be able to see the hand and select tools when the page controls are at the bottom of your screen.
Adobe, I usually love your software, but I spent a half hour looking for a hand icon. Frustration. >:-((

OK.
H to get the hand tool, and
V to return to the selection tool.
For a list of keyboard commands for Acrobat Reader 6 click Section Four: Using Keyboard Commands
And Sara, please tell them to write a complete manual for DC soon.
Thanks,
David

Similar Messages

Where can i find the zoom and pinch tool in New Adobe DRAW App

Hi People
Dose anyone know where i can find the zoom and pinch tool in adobe draw?
On adobe ideas it was on the tool bar with the pan icon that looks like a hand and the cross icon for the zoom.
Just wondering if Adobe put it in the new Adobe Draw program, i hope so, its hard to get detail with out the zoom tool.
Best, Phil

Oops Sorry Jumped the gun again! i found out how to do it. I was using my jot touch styles which mean you have to hold down the icon on the upper left with the styles then use your fingers to do the pinch and zoom gesture to make it work

Adding interactive buttons in Acrobat X Standard disables the Commenting and markup tools

Why does adding interactive buttons to PDFs in Acrobat X Standard disable the Commenting and markup tools in the PDFs, but only when they are viewed in the Reader, not when opened in Acrobat? When the buttons are removed, the Commenting and markup tools are re-enabled in Reader.
Thank you.

Which version of Reader are you testing with?

Where can I find the colour range selection tool in Photoshop Elements 11?

Note: It is not under the Selection tab in the menu. This tool is very useful and Adobe help is making it very hard to find.

The Select>Color Range is only in the full versions of photoshop such as photoshop cs6.
As far as i know that's never been available in photoshop elements (from the factory sorta speak) except in version 3 using an action created in photoshop.
There are many other ways to make selections in photoshop elements.
As a side note and not really pertaining to your version of elements, years ago back in the pre os x days, there was a plugin for photoshop/photoshop le/pse 1 on macs quite similar in function to select>color range.

Acrobat X: Hotkeys for "hand tool" and "select tool"?

In Acrobat X, are there hotkeys for "hand tool" and "select tool"?

thanks. but why doesn't adobe simply call it "single-key hotkeys"? "accelerators"?? how ambiguous.

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, childr

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, children do not understand the meaning, pressed by mistake to the game fee of options found APP software fees has been removed, the 3 pen order really is not a small amount, a small fortune in Taiwanthe burden, the normal person would not spend such fees to play mobile games, kids really are unintentional, Sorry! hope you can help me claim to cancel the game cost very grateful!
PS: order number --- 1.MH****Z0J --- 2.MH****4QJ --- 3.MH****6NQ
My English is not good, please forgive me.
<Personal Information Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address and phone number from your post.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can turn off in-app purchases on your phone via Settings > General > Restrictions > In-App Purchases 'off'

What is CPI-C and how to find the username and password for a 4.7c install

Dear Friends,
Please tell me what is a CPI-C username is ??
When do we use it?
And how/from where could I find the CPI-C user name and password of a particular system(4.7c)?
Please give me a detail knowledge.
waiting for replies ....
thx,
jeevan

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0.

Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please t

Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please try again. If it continues to fail contact adobe support. Please assist me asap, i need this working ASAP as i specially purchased for immediate use.. thanks:)

No, there was no option for enter the serial number, which i gather u mean by S/N?

I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?

I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?

Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How can I buy applecare plus, if I buy "refurbished ipad" in apple oline store? I cannot find the way to select applecare plus before checkout.

How can I buy applecare plus, if I buy "refurbished ipad" in apple oline store? I cannot find the way to select applecare plus before checkout.

Add it to your cart. Then, when you're on the cart screen, scroll down and you'll see a choice for AppleCare+ with an Add To Cart button!
I also called the Apple Store and their agents confirmed that it does apply to the refurbished models!

Acrobat Reader DC: Find the hand and select tools

Similar Messages

Maybe you are looking for