Acrobat reader installed fine, but opens for five seconds and then closes. Using Windows 7 and mcafe
Acrobat reader installed fine, but opens for five seconds and then closes. Using Windows 7 and McAfee on a Dell laptop.
You can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Similar Messages
-
Acrobat Reader install failing but installer says it completed successfully
I am trying install Acrobat Reader 9 on a Windows XP Pro machine.
The download manager starts, says it is downloading and installing installing the reader, it completes the download, then it says installation was successful, and the download and installation progress bar is at a 100% but it hangs at that point.
Tried closing the download manager it say it is still installing an application, close anyway, and check sure enough Acrobat Reader is not installed.
If I try relaunch, it just goes straight to showing that installation is complete.
At this point if you check add/remove programs the download manager is listed but Acrobat Reader is not. If reboot, then neither the download manager or Acrobat Reader is listed.
At this point if I go back to the download page, and relaunch the whole process it starts with wanting to install the download manager again.
I have tried this with Anti-virus both enable and disabled now affect.
Please help!!SInce this is the Acrobat forum and not the Reader forum, I have no idea. You might try the Reader forum for the Adobe Reader product. There has not been an Acrobat Reader since version 5, and then it was also a different product.
-
Everytime I open an app is stays open for a fews seconds then closes. this happens to every app and eveytime i try to open one
- Try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next try downloading/installing a free app. Others have said that works. -
Anybody got a clue why acrobat wont work after cloning entire computer to a new hard drive?
I 'repaired ' the installation and rebooted twice.
Acrobat just shuts down after 5-10 seconds.
I need help.
-SteveMavericks is free but a jump from 10.6 to 10.9 might break a lot of other software (particularly if running any PPC-only generation software) which could be costly to replace. Yes, it will have to be done someday but if the OP's computer holds out a few more years then the OP will have saved buying all the Mavericks generation software that will be broken when OS 12.2 comes out and can make the jump directly.
So says somebody who still runs a G4 with iTunes 7.5 and is not looking forward to the day it dies and has to buy the "newest and best". -
When I open iTunes, it opens for about a milisecond, then closes.
As in the title, when I open iTunes on my Dell computer, it closes before I am able to do anything. It was working fine one night when I logged off and the next morning it was not working. I have tried re-installing, and changing firewall ports, and nothing seems to work. I tried reverting to an earlier version and the same thing happened.
This same problem occurs if I try and open any Quicktime application. Could someone help? Thanks.Sounds like you have that nasty malware going around.
Scan your PC with ewido
www.ewido.net/en/ -
Anybody bought bad apps?
Music purchased and downloaded from iTunes will not play in the Windows Media Player.
Try re downloading the album >
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Since returning from overseas my iPad mail does not work. Selecting mail opens a blank white screen which stays open for a short time then closes. No functionality is available during this time. Doing the normal reboots etc does not resolve the problem.
Have you tried to go into the settings, mail, contacts and calendars and removing then re-adding the account info?
-
When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGCWhat's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.
-
trying to open a file i have downloaded and it comes up with this responce
Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).Here are three documents that i down loaded, there are others
John Buckley
5 Sunmead Walk
Cherry Hinton
Cambridge
CB1 9YB
07411142946
0845 3881751
[email protected]
www.cambridgeriskmanagement.com
Cambridge Risk Management Limited is a trading name of Comply UK Cambridge -
Acrobat Reader installed detection via JavaScript
I am curious whether or not Adobe plans on using AcroPDF.PDF.1 as an indicator of the most current version of Adobe Reader (for activeXObjects in Internet Explorer). I know that this will work for detecting whether Reader 7 is installed but now that I think about it, when Reader 8 comes out, if a user already has Reader 7 installed, obviously AcroPDF.PDF.1 will be defined in their registry so eval("new ActiveXObject('AcroPDF.PDF.1')") will return true. Does anyone know, Adobe specifically, how the next version of Reader will be classified in the ActiveX list (or registry key). Will it be AcroPDF.PDF.2?
The reason why I am asking is because I need to detect whether or not our clients have the latest version of Acrobat Reader installed for printing documents from our site. I apologize in advance if the following code looks really messy. This is my first post and I just pasted my code directly into the textarea box. Here's what my detection code looks like and works fine for now (but when Reader 8 comes out....hmmmm):
if(window.ActiveXObject) { // Internet Explorer var tryReader7 = true; for (var iVer = 20; iVer >= 0; iVer--) { try { if(tryReader7) { /********************************************* Check to see if Reader 7 is installed first. TRUE: Break out of loop FALSE: Set flag to false so that this check isn't executed each pass through by the loop *********************************************/ tryReader7 = false; // We only want to check ONCE var Reader7Exists = eval("new ActiveXObject('AcroPDF.PDF.1'); "); if(Reader7Exists) { // User met Adobe Reader Version Requirements oReader.installed = "True"; oReader.version = max_ReaderVerReq +".0"; oReader.message = aMessageStatus[4]; //"Adobe® Reader® installed" oReader.needsUpdate = 0; break; } } var ReaderExists = eval("new ActiveXObject('PDF.PdfCtrl." +iVer+ "'); "); if(ReaderExists) { // User met Adobe Reader Existence Requirements oReader.installed = "True"; oReader.version = iVer + ".0"; oReader.message = aMessageStatus[4]; //"Adobe® Reader® installed" break; } } catch(e) { // (minimum|maximum) version not detected oReader.message = aMessageStatus[7]; //"You do not have the latest Adobe® Reader® installed or enabled. } }I am trying with Reader 9.
I am not trying to print from the server. The printing will happen on the client computers that is why I am trying to print using javascript from an html page. My clients do have different versions of Reader from 6 to latest
Is there any way to achieve it with out installing anything else on the computers?
Thanks, -
I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.
Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!
-
How to open adobe acrobat reader without having to open photoshop?
how to open adobe acrobat reader without having to open photoshop? i keep getting this message when opening pdf files. "adobe acrobat was installed as part of a suite. to enable adobe acrobat, please start another component of this suite(such as photoshop)
Are you mixing Adobe Acrobat with the Adobe Reader?
If you have Acrobat on your computer you need to associate PDFs with Reader to open in it.
You also need to get the latest security patches for Reader. -
Acrobat Reader 9.1.2 opens endless number of browser windows
Hi all,
after the update to Acrobat Reader 9.1.2 opening .fdf ends in an endless number of browser windows until Acrobat Reader gets killed or the browser crashes.
Testet with FF 3 and IE 6 on WinXP SP 3. Preference Setting "PDF in Browser anzeigen" (open pdf in browser) has no effect.
Any help or idea is welcome as this is causing serious problems for us.
Regards,
AndreasHello again, Andreas:
I believe I have found the resolution to your browser plugin issue but I'm sure it will require administrative privledges and will require modifying the Windows registry (not something for the faint of heart). If you are interested, check out the knowledgebase article here: http://kb2.adobe.com/cps/328/328233.html
Something you may be able to try that doesn't require admin privledges:
1. Open Reader
2. Click Edit > Preferences
3. Click Internet on the left menu
4. Uncheck "Allow fast web view"
Crosses fingers for you!
Michael -
Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?
the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise). -
Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2
I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem
Maybe you are looking for
-
Playlist shuffle for Ipod Nano? or am I stuck with same order of songs?
Is there a shuffle option for the nano where I can vary the order of the songs played? It gets really onld knowing which song is going to come on next.
-
When I use Skype or record something, everything can be heard: not only mi internal mic, but even system sounds. I tried lowering the mic volume to 10, but nothing changes. Any suggestions?
-
How does the query function on a Infoset?
Hi Gurus, I have 3 ODS(GL ODS,Purchasing item,Purchasing Schedule Line).I have built an infoset on these ods. Now my question is : 1)When i run a query on the infoset,what does the OLAP processor do? The GL ODS is on the left hand side in Infoset and
-
Custom software component not selectable in Landscape Configurator
Hello all, I am trying some tutorial about Java development with a track and the developer studio. I have successfully created the software component in my SLD, which is well linked to the NWDI. When creating a track in the Landscape Configurator, ho
-
I have an ipod touch 4th gen. Can anybody help with ghost files?
Here is my problem: I added an equalizer program called "Louder Logic", It worked great until I needed to delete most of my Loaded CD's, to create space. I made the mistake of deleting the Louder Logic CD file first, which created these Ghost Fil