Acrobat reader will not print what is showing on the screen

I created a business card in a graphic design program,  exported it as a PDF file. When I open the pdf file in acrobat, it will display correctly on the screen, but will not print correctly. 
When I click on the print icon, a box opens and shows a small preview of what is supposed to print. What shows in the small preview box is correct, but when it prints, it drops off text.
When I go back to the program that created the card, it will print correctly from that program.  When I open the pdf file in Photoshop, it will print correctly in Photoshop.  It just drops off text in Acrobat Pro or Acrobat Reader when printing.

This sounds very similar to the issue that I am having.
acrobat pro printing correctly ,same file with adobe reader printing grey instead of black.
Unfortunately I have not yet gotten any feedback, and your post being over 45 days without a response doesn't bode well for my issue either.
Sorry I can't help you.

Similar Messages

  • Acrobat reader will not print in OSx maverick

    I have not been able to print pdf files in Acrobat Reader using OSx Maverick. I have re-installed the the most recent version of Acrobat reader a couple of times but no success printing. Anyone dealing with the same proble and is there a solution?

    msicmn wrote:
    I have not been able to print pdf files in Acrobat Reader using OSx Maverick. I have re-installed the the most recent version of Acrobat reader a couple of times but no success printing. Anyone dealing with the same proble and is there a solution?
    All I can report to you is that I can print from Adobe Reader just fine. I'm using an iMac running Mavericks 10.9.1 and have been able to print since day one. One suggestion is to use Adobe Reader's print button icon instead of just Command-P.  You might also try repairing permissions using Disk Utility.
    What happens, exactly, when you attempt ot print and how do you try to do it?

  • Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    A few suggestions for you:
    Try:
    uninstall all HP utilities or other HP apps on your Mac
    see if there is updated software on the HP website
    go to System Preferences > Printers & Scanners > Print
    control-click on your printer in the column on the left
    select "Reset Printing System..." and "reset" in the dialog that follows
    Do a factory reset on your printer
    go back to printers & scanners and it should see your printer and download a driver for it from Apple

  • My printer will not print in black ,i replaced the ink and now it will not print in black ink

    my printer will not print in black ,i replaced the ink and now it will not print in black ink

    Please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT201272 My A&E app will not install.  It shows on the purchased screen and says "Open" but will not install... Help

    My A&E app will not install.  It shows on the purchased screen and says "Open" but will not install... Help

    open sys. prefs, cd/dvd select how you want disc to open

  • HT4623 After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off.

    After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?

    Basics from the user guide have always been, and still remain,  restart, reset, restore from backup, restore as new.

  • OS X Server Error: No existing connection from which credentials can be copied. It will not let me get out of the screen.  I have to close the Server App to get out. Any suggestions?

    Editing any user profile, when I try to save the change I get the error: no existing connection from which credentials can be copied. It will not let me get out of the screen.  I have to close the Server App to get out. Any suggestions?

    This is also being disucssed somewhere else https://discussions.apple.com/thread/5486117. I have the same problem, sorry i can't help.

  • I can not figure out why acrobat reader will not re-install on my vista business laptop.

    I had reader forever. I had a problem with Flash so I un-installed everything to do with adobe. No I have re-installed flash and activex but adobe reader will not istall or download from the website. Please help me get a download link for reader.
    I have 64 bit windows vista business.
    thanks
    josh

    You can try using this tool to first remove all traces of previous versions of Reader:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, download the full offline Reader installer from 
    http://get.adobe.com/reader/enterprise/
    and run it immediately after restarting your computer.

  • Is it possible to make an object/colour that will not print but still be visible on screen once saved as a PDF?

    I want to show stuff in a PDF that will automatically not 'print' from Illustrator.
    For example create a colour to make shapes and text that you can read from the saved PDF but will not print once the PDF is printed out
    Thanks

    from illustrator you could put stuff on a template layer (check 'Template' in layer options), but then it would only be visible on the illustrator side; opened in Acrobat the layer would be invisible.
    you could do it from Acrobat Pro though. have 'Create Acrobat layers from top-level layers' checked in the PDF save options, then open in Acrobat and look in the layer properties (this is from Acrobat Pro 9):

  • Have Photosmart Premium All-in-one, model c309a. Will not print a test page as the default printer.

    Have gone through all diagnostics offered online by HP, but to no avail.  Am hooked up wirelessly and all connections say OK.  The print queue just keeps building up until i clear it.  Have checked ink cartridges, power reset procedure and also the Embedded Web server, print driver and port,verified that is not paused or offline, restarted the print spooler, checked the software program and removed and reinstalled the HP software.  It just will not print.  Will copy but not print.  Help!!

    I have exactly the same problem here.
    The printer is connected wirelessly to my router, which is connected with cable to my WinXP computer.
    I can see the web server, all pages report everything is normal and ready. 
    I can ping from my computer to the printer.
    I had no success getting the HP software on the CD to install, but the ~ 200 MB download version installed at least. However when the software probes to see what printers are available, it just doesn't see the printer (even though I can access its web server).
    I finally got my wife's computer (Win 7 64 bit) to connect, but don't know exactly what I did to make that happen.
    I noted that HP has a new version of firmware for the printer, so that will be tomorrow's project.

  • I can only access apps by double tapping and i cannot scroll past what is showing on the screen how do i change this

    For some reason I need to double tap everything to access apps, menu etc. Also, I cannot scroll down past what is appearing on the screen. Any suggestions for help? Please.

    Go to Settings - General - Accessibility - Voice Over = Off
    NOTE: You will need to use 3 fingers to scroll to various menu items

  • Adobe Reader will not print documents and I have tried the work around

    I cannot implement work around ! because my XP program does not offer a spot to give my printers a Share Name. So what do I do next?

    What Adobe Reader version?  If 10.1.2, try the patch: http://helpx.adobe.com/acrobat/kb/pdf-wont-print-reader-10.html

  • Acrobat Reader will not open scanned files

    Since upgrading to Adobe Reader X, I have been unable to view any documents scanned with my Lexmark printer/scanner.
    Until now, I have scanned documents to a PDF in the following manner:
    -  I Press Scan mode on Printer/Scanner
    -  Printer/Scanner downloads Application List
    -  I choose "Scan to Acrobat Reader" and press Start to begin
    -  Printer/Scanner screen says "Scanning to Acrobat Reader" as document scans & "Scanning Completed" when it finishes
    -  Message box displays on Computer screen that says "adding image"
    -  ABBYY FineReader 6 Plus progression meter is displayed on Computer screen until document is 100% processed.
    -  PDF file of the scanned document opens on Computer screen by Acrobat Reader
    Since upgrading to Adobe Reader X, everything works the same except the final step.  I am unable to view the PDF, and therefore I am unable to save the document.  Does anyone know of any settings in Adobe Reader X that I need to adjust so that Adobe could work the same as the earlier version and create a PDF of a scanned document?
    Thanks in advance,
    Jay

    I never did get a response to my original post, but I would like to share with others what I did to finally fix the problem.
    The problem I described in my original post was with a Lexmark x4580 printer.
    I removed Adobe X from my PC and downloaded previous versions of Adobe reader until I found one that worked.  It turned out that Adobe Reader 7 worked.  I was able to scan a document from my Lexmark x4580 printer and Adobe 7 opened the document on my PC in a PDF.
    I hope this info helps out anyone having a similar problem.
    Take care and God bless,
    Jay

  • Acrobat form will not print.

    I have a 3 page document that was converted from Word to 9.0 Illustrator, then to 8.0 Acrobat reader.  The document is emailed to people to complete the fields for a new business application.  Occassionally, an application will return and one page will have the fields completed, but the wording, lines, background, etc on the original page are totally blank.  I print the original document off and it is all there.
    Any ideas why this is happening?

    If you're talking about a returned hardcopy, users have the choice of just printing the form fields. Some user may be doing this.

  • On linux, Acrobat Reader will not open files on SMB server

    I try double clicking a file on a network SMB server in Nautilus on Ubuntu and Acrobat reader starts but does not open the file.
    What's going on?
    Alex

    Hi Alex,<br /><br />Just for confirmation, have you opened the Windows share in Nautilus directly i.e. using URL of the form smb://<server-name>/<share-name>/ and then trying to open the PDF file by double-clicking?<br />If that is the case, it is a known issue.<br /><br />In the meantime, one way to open the PDF file (if you have sufficient privileges) would be to mount the SMB share, open the share (from the mount point) in Nautilus and then try to open the PDF by double-clicking?<br />Could you please try this and let us know if there are any issues with this?<br /><br />Thanks for the feedback,<br />Varun

Maybe you are looking for

  • Apex-config.xml is broken after password change with encryption

    Greetings, I am using Apex Listener 1.1 with Oracle GlassFish Open Source Edition 3.1. I found something strange when changing the connection password in apex-config.xml. If I change the password to keep it plain text like the following, it works fin

  • Importing music FROM an external hard drive

    My dance studio has an external hard drive with over 15,000 songs in MP3 format, and I would like to be able to put some of those songs on an iPod. My problem: I do not want double copies of my 15,000 songs (one copy in the external hard drive and on

  • ERROR install oracle database 10gR2 in solaris sparc 64

    Dear All, I got error when installing oracle database 10gR2 on solaris sparc 64. these are the messages: /usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db

  • Can anyone help with resolving static playback & input  in logic 9

    I'm a mix engineer and a bright guy, however I'm stuck.... I brought a new hardrive using as timemachine .. I'm using a iMac, My interface is RME UC connected to a Yamaha O1v96 via ADAT in & out. I also have Lucid Gen6 wordclock The static playback h

  • How to match PR in AP module?

    Fixed Asset purchasing is done by creating a PR and no convertion to PO because our customer doesn't want to do the PO approval in such a situation. Then I have a question that how to match the AP invoice with PR in AP module? Does anyone meet such a