Acrobat Reader XI fail to open file from unc path "Access Denied"

Hi,
When we try to open a pdf file from an unc path by double-click on it there is an error message : "There was error opening this files. Access Denied"
If we do "File -> Open" the file open correctly. Same if we copy the file localy.
After looking around Internet and other thread Acrobat Reader X got the same problem but seemed to be resolved with an update.
If we desable "Enable Protected Mode at startup" the file open correctly (it is not a solution).
Does anyone have a solution to this problem ?
OS : Windows XP SP3
Acrobat Reader : 11.0.2
Regards,

I have also seen this occur with one user's computer. Another user with similar privileges and software setup does not exhibit the same issue however. Would love Adobe to investigate and address this issue.

Similar Messages

*ERROR: failed to open file " export directory path /ABAP/DATA/SAPSTR.LST

Hello experts,
I am doing system export.
as per the system copy guide I follows all steps.
when I tried for export preparation.
I got following error in "/tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/PREEXP/R3ldctlExport.log"
ERROR: failed to open file "/db2/PRD/sapdata4/export_prd/ABAP/DATA/SAPSTR.LST"
/db2/PRD/sapdata4/export_prd is my export directory.
but I found that the "SAPSTR.LST" is not exist in the location.
also I don't find any log regarding this error.
how to resolve this? please guide.

Hi Rupesh,
In continuation of previous mail, there is keyboard problem hence spelling mistakes.
Various possible solutions:
Report SMIGR_CREATE_DDL has to be executed before starting export preparation.
OR
Download llatest kernel patch and apply them in /spmnt/<SID>/exe
make sure download latest patch R3ldctl file and R3load from SAP Marketplace and apply them in to /sapmnt/<SID>/exe.
Make sure export dump folder should be in local drives (in windows) or local filesystems i.e.do not use network drives (windows) or NFS (in case of unix).
FInally check permission by using chmod 777 in exportdump folder in case of unix.
Regards
APR

Sharepoint 2013 Does not open files using UNC path from Server

Hi All,
Just setup our new 2013 sharepoint intranet site , I tried adding a hyperlink to a document stored on our server using a UNC path file://servername/share/filename.doc but when i click on it it takes me to a blank Webpage in a new tab.
I have turned on "open client applications" in the site collection features hoping that would help ....buuuuuut it did not.
Also tried variations in the UNC path eg: \\servername\share\filename.doc etc..
Any help would be greatly appreciated
Thanks

Open start run > type > file://servername/share/filename.doc Does this works
http://social.technet.microsoft.com/Forums/sharepoint/en-US/63b229de-ce4a-42be-b209-2c0f33d4b0d5/problem-opening-an-access-file-from-a-unc-file-link-in-sharepoint?forum=sharepointgeneralprevious
Actually the problem I described is an Internet Explorer issue and I will try to get resolution in the appropriate forum. IE exhibits the described behavior whether the link is in a Sharepoint site page, or in a regular non-Sharepoint web page.
Mozilla does not have the issue.
Check below:
http://social.msdn.microsoft.com/Forums/en-US/3f2c34cc-5686-4e03-ba26-092aaa29ff33/link-from-document-library-to-unc-path
If this helped you resolve your issue, please mark it Answered

Open 2nd PDF from UNC-path fails

Hallo,
I use Adobe Reader 11.0.08 on Windows7 SP1 (Enterprise) and I try to open PDF-files from UNC-path. The first attempt is successful. If Adobe Reader is still opened, the attempt to open a 2nd PDF-file from (same or other) UNC-path in Windows Explorer does not work without any error message. The file does not open.
The following attempts were successful or not:
(drive P:\ = \\domain\dfs$)
Double-click on \\domain\dfs$\path\file1.pdf opens the file.
Double-click on \\domain\dfs$\path\file2.pdf does not open the file - no error message.
Double-click on P:\path\file2.pdf opens the file.
In Adobe Reader File - Open - \\domain\dfs$\path\file2.pdf opens the file too.
Double-click on \\domain\dfs$\path\file2.pdf opens the file.
Double-click on \\domain\dfs$\path\file1.pdf does not open the file - no error message.
Double-click on P:\path\file1.pdf opens the file.
In Adobe Reader File - Open - \\domain\dfs$\path\file1.pdf opens the file too.
Double-click on P:\path\file1.pdf opens the file.
Double-click on \\domain\dfs$\path\file2.pdf does not open the file - no error message.
Double-click on P:\path\file2.pdf opens the file.
Double-click on P:\path\file2.pdf opens the file.
Double-click on \\domain\dfs$\path\file1.pdf does not open the file - no error message.
Double-click on P:\path\file1.pdf opens the file.
If Adobe Reader is still opened, but no file is opened:
Double-click on \\domain\dfs$\path\file1.pdf does not open the file - no error message.
Double-click on P:\path\file1.pdf opens the file.
As you can see: If Adobe Reader is still opened, I can't open a PDF-file from UNC-path from Explorer. But that's what we need. Our Frontend-application opens an Explorer window and the user has to choose the PDF-files to open via double-click. It would be a very roundabout way to copy the Location from Explorer to open the file in Adobe Reader. We'd like to open the first and all other files for the same session from Explorer via double-click.
Sure, if I disable protected mode every attempt works fine but unfortunatelly it is no permitted option to disable protected mode (security policy) - it has to be enabled.
Each change in "ProtectedModeWhitelistConfig.txt" was not successful. For information its current config that works as mentioned above:
; Files Section
FILES_ALLOW_ANY = \??\UNC\domain\dfs$\*
(no entries in other sections)
How can I open every PDF-file for a session from UNC-path via double-click from Explorer if Adobe Reader is still opened ?
Thanks in advance for any help.
Lisa

Hi Lisa,
Can you please update your Reader to latest version "Adobe Reader 11.0.9" and verify that the issue still occurs.
Thanks,
Shakti K

When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGC

What's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.

Problem with 9.3 Reader when opening files from internet

I keep receiving the message 'There is a problem with Adobe/Acrobat Reader. Please exit Adobe Acrobat/Reader and try again' when trying to open come files on the internet. I am able to open files from my hard drive and some files from the internet. I have uninstalled and re-installed Reader, but get same result. Any ideas?

As I posted on Feb. 19 this is what works for me. OS is Windows 7 64-bit, AdoveReader 9.3.1., IE8.
Open Adobe Reader,
            go to edit menu,
            under Preferences
            go to Internet, uncheck "Display pdf in browser"
The pdf files then open, but not in the browser
or if you have Google tool bar installed:
On the Google tool bar
                        click on the options icon (a wrench)
                        go to Tools
                        scroll down to the bottom
                        uncheck Translate
Or uninstall the Google tool bar.
Pdf files open without a problem in Firefox.
All of these solutions are easy.
Good luck,
Too Green

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

trying to open a file i have downloaded and it comes up with this responce
Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Here are three documents that i down loaded, there are others
John Buckley
5 Sunmead Walk
Cherry Hinton
Cambridge
CB1 9YB
07411142946
0845 3881751
[email protected]
www.cambridgeriskmanagement.com
Cambridge Risk Management Limited is a trading name of Comply UK Cambridge

When i down load a book on to my ebook reader i get a message saying "failed to open file"

When I down load a book on to my ebook reader and try to open it I get a message saying "failed to open file"

Restart your Mac and the scanner then try scanning.
By the way, there's an alternative to using the Canon scanner software.
Use the pre installed Image Capture app in your Applications folder instead > Mac Basics: Using a scanner

11GR2 2nodes CRSD ASM - Failed to open file in dirty mode

Hi...
we facing a problem with a two node 11gr2 cluster.
Independently first started node one ore node two. The node that has start first starts normal.
The second started node fail with error mess ......
vi .../emcrsp.log
2011-04-17 10:19:14.406: [ OCRASM][4090540208]ASM Error Stack : ORA-15077: could not locate ASM instance serving a required diskgroup
2011-04-17 10:19:14.408: [ OCRASM][4090540208]proprasmo: kgfoCheckMount returned [7]
2011-04-17 10:19:14.408: [ OCRASM][4090540208]proprasmo: The ASM instance is down
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprioo: Failed to open [+DGCONF]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprioo: No OCR/OLR devices are usable
2011-04-17 10:19:14.416: [ OCRASM][4090540208]proprasmcl: asmhandle is NULL
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprinit: Could not open raw device
2011-04-17 10:19:14.416: [ OCRASM][4090540208]proprasmcl: asmhandle is NULL
2011-04-17 10:19:14.416: [ default][4090540208]a_init:7!: Backend init unsuccessful : [26]
[ CLWAL][738463920]clsw_Initialize: OLR initlevel [30000]
2011-04-17 10:19:15.272: [ OCRASM][3128352944]proprasmo: Failed to open file in dirty mode
2011-04-17 10:19:15.272: [ OCRASM][3128352944]proprasmo: Error in open/create file in dg [DGCONF]
[ OCRASM][3128352944]SLOS : SLOS: cat=8, opn=kgfolclcpi1, dep=402, loc=kgfokge
The interlink is up and running.
We try to recreate the OCR and Voting from daily backup without any result
Does anyone has an idea ?
Thanks *T
Edited by: tbrinkmann on Apr 20, 2011 5:15 AM

Hi Paul,
yes the ASM is down.
That was confusing me. If I shutdown the other node the +ASM can start and clustering com´s up normal.
It looks like only one node can use voting or ocr....
The behavior looks like the interlink is down buts is not ;:-(
One node ( first com´s up) start normally and take all cluster resources ...scan .. the vips..
And second node show this error mess..
Thanks
*T

Windows 8 and ArchLinux dual-boot - Failed to open file: arch\boot\...

Hey!
I have a problem where I don't know how to configure the EFISTUB to boot ArchLinux along Windows 8. I have read the instructions on the wiki and tried for two days and the only thing I've come up with is copying some files into the /boot/efi/EFI/arch/ folder, and adding the entry into the UEFI boot menu. I can select it when Restarting Windows8 through the shift-restart thing and stuff but when it attempts to boot it says:
Failed to open file: arch\boot\archiso.img
I don't know how to set this up and fix it. I am so confused with everything right now due to the instructions on the wiki basically being "You can either do it this way, that way or any other way." but does not specifically expain how each works (at least so that I understand it fully) and what has to be done to complete these steps. Like, I need a complete tutorial from Start to Finish, to do this because I'm too nervous messing up my partitions. I have understood some parts thought and what I want is to be able to boot it from the EFISTUB instead of chain-booting like I usually do. I just don't know how to connect the entry in the list to the proper files to boot the system.
What I have done:
Installed the base system.
Istalled grub in the base system but has not used grub to install on the /boot yet because I don't know if it is to be used if I'm supposed to use the EFISTUB (I was thinking efibootmgr would be enough)
Tried to use efibootmgr to make the entry, but the entry does not work. (If this is how I should do it, can you explain which partition to target and what the different values would mean when answering?)
I don't know which one is right, or if both shall be done (I guess Grub is used if I want to chain-load. I guess I can do it if it's the only way)
Anyway, I hope you guys can answer me so I can fix this. Thanks

What you're trying to do now is:
EFI->kernel (EFI stub)
This is appealingly direct, but it's tricky to get working. What the wiki now recommends is:
EFI->gummiboot->kernel (EFI stub)
...or...
EFI->GRUB->kernel
These approaches are less direct, but they're easier to configure. The trouble is that both the EFI's built-in boot manager and the EFI stub loader are tricky to configure. For a newbie to get them both configured correctly on a first attempt at installing Arch is very difficult. Getting the EFI to launch gummiboot or GRUB is easier because these programs don't require the complex parameters that the EFI stub loader requires. Those parameters can instead be specified in the gummiboot or GRUB configuration file, which is easier to manage for quite a few reasons.
If you want to pursue using the EFI stub loader directly, you certainly can. I've learned from experience, though, that it's not worth my time to try to help with users who want to do this. Using an intermediary program is easier to get working. IMHO, the direct approach has no real benefits except that it gives you bragging rights that you've done it. Your system won't boot any faster or more reliably in the more direct approach. (Well, technically it will be faster, by only by a matter of milliseconds, assuming you use a 0 timeout value in gummiboot.) In fact, it will be less reliable, because gummiboot, GRUB, and rEFInd all offer ways to adjust boot options on a boot-by-boot basis, which is very helpful when fixing problems. You can't do this with the direct approach.

My PDF Document can't open properly in Acrobat Reader XI, But properly open in Acrobat Reader X

Hi ~~
As the topic, My customers using Acrobat Reader XI Can't open My Pdf file,
But, same file can be opened properly in Acrobat Reader X,
Acrobat Reader XI shows Error Message: Can't Capture Embeded Font
Is there any update of Acrobat Reader XI can fix this problem? pdf file sample: https://www.dropbox.com/s/68t63gz85ux3v5z/AAAAA.pdf

Hey jameswangtw,
Please ask your customer try downloading Asian Language Pack for Adobe Reader from the link given below:
Adobe - Adobe Reader : For Windows : Adobe Reader 11.0.09 Font Packs - Asian and Extended Language Pack
Regards,
Anubha

Can't open files from Bridge in CS6

All was good with CS6 until today - it will not open files from Bridge. Jpg and RAW, neither will open, it's driving me bananas! Any suggestions?
Edit: Problem solved. I had overlooked an old version of PS 7.0 was still in my program files and CS6 Bridge had picked it up as default editor. Deleted PS 7.0 and everything is back to normal. Phew!

Lots of questions here, will see what I can add.
For the file problem go to preferences/file type associations. You should have the option selected CS6 for the extenstion as the default. Might try the radio button on the bottom first to set them to default settings.
If the 1.77g file you are refering to is the one you downloaded and used for installation you can delete it. It is a wise choice to save it to a DVD first so in case you need it in the future you will have it. Also save the serial number in safe place. Acutally safe is not the right word, need to save in place where you can find it if you need it next year. HD can fail.
There are still thrid party plug-ins that do not work in 64 bit mode, hence the 32 bit version. Also there is no 64 bit TWAIN so some still like to use that for scanning.
Some users experience file association and other problems with an uninstall of past versions. So it is safest to leave them be.
If you want to clean up a little resist the urge to move any Adobe programs once is is installed. Can really foul it up.

The dialog box open twice when open file from the server

I use the following code to download/open file from the server:
<%
String filename = "MengxianhuiDocTest.doc";
String filepath = "D:\\";
response.setContentType("APPLICATION/OCTET-STREAM");
response.setHeader("Content-Disposition",
??attachment; filename=\"" + filename + "\"");
java.io.FileInputStream fileInputStream =
new java.io.FileInputStream(filepath + filename);
int i;
while ((i=fileInputStream.read()) != -1) {
out.write(i);
fileInputStream.close();
out.close();
%>
If the application runs, the Open or Save dialog box display.When I select open the file,
the dialog box will display twice.
Pls help me.
Thanks.

thx
but I tried it and it did't work.
The dialog box also display twice.

Acrobat Reader XI fail to open file from unc path "Access Denied"

Similar Messages

Maybe you are looking for