Acrobat Standard 10 starts up and then shuts down within a few seconds
Im running windows 7 professional. I was using adobe acrobat Standard 10 and downloaded and installed the files to be able to view 3D pdf's. after that it would open acrobat standard and then shut down after a few seconds. So then i tried to use acrobat pro 11 and then it worked fine. The problem was that this acrobat was only a trial version. I then tried to do a system restore to just have the acrobat standard 10. I then was having the same issues as before. So i unistalled everything including the 3D viewing program. Reinstalled just acrobat standard 10 and i still have the same issue. I manually downloaded the latest update and that has not worked. I am not to sure what to do???
With the uninstall (and hopefully deactivation), you should have also run http://labs.adobe.com/downloads/acrobatcleaner.html and removed the Acrobat folder. the reboot and reinstall.
Similar Messages
-
IMac Starts Up And Then Shuts Down ...
Hi ...
I'm hoping that someone out there can help me ...
I purchased an Apple 24" iMac about 3 years ago ...
It was pretty much working perfectly until 2 days ago ...
The last time it was fully operational I'd just switched the computer on for the day - opened iTunes - and was using the FINDER to find approx 600 MP3s to add to iTunes ...
Whilst the FINDER was searching for the MP3s the iMac froze ...
So I decided to RESTART the computer by holding the POWER BUTTON to shut the computer down ...
I gave the computer around 10 secs to shut down ...
Then when I pressed the POWER BUTTON to START the iMac again it reached the grey screen with the Apple logo and the rotating dial ...
The computer then started emitting an audible clicking sound as if it was searching for / organising data ...
The sound eventually stopped but the iMac froze on the grey screen ...
So again I decided to RESTART the computer by holding the POWER BUTTON to shut the computer down ...
I gave the computer around 10 secs to shut down ...
Then when I pressed the POWER BUTTON to START the iMac again it reached the grey screen with the Apple logo and the rotating dial ...
And froze again ...
I followed the instructions contained within the EVERYTHING MAC booklet ...
I tried holding the OPTION key whilst starting up ...
I tried holding down the COMMAND OPTION P and R keys to reset the PARAMETER RAM ...
I also tried holding down the D key whilst starting up to test the Apple Hardware ...
My iMac passed the Apple Hardware Test ...
However every time I now try to start the iMac it reaches the grey screen (Apple logo / rotating dial) and then shuts down after approx 1 minute ...
Is this simply a boot problem ? ...
What alternatives do I have to boot up / correct the problem ? ...
I'd be ever so grateful if someone out there could help walk me through alternative actions to take ...
Kind regards ...Hello
Try target disk mode see if your mac shut down from this way , to do that
hold hon at start up "T" on key board just after startup sound until screen show a firewire logo as screen saver
and wait ..
if by chance you have a second mac you can use a fire wire cable to link it , in that way your mac is like an external hard drive , most easy way to recover data from it
Try start in single user mode , use COMANDE - S at start up
Try start in safe mode , use SHIFT key at start up
if in all case you mac shut down after 1 or 2 min of use , certenly mean a mother board and or powersupply problem
be sure to have perform SMC and PRAM reset at least 3 times each
HTH
Pierre -
Mac Pro starts up and then shuts down, how do I fix this?
Recently when I start up my Mac Pro it start its process and then I see the Apple Logo and then the screen goes black and the monitor says I think something like no digital signal. I have to start up my Mac Pro a number of times before it finally stays open. Because I use to see a bright flash when the Mac Pro would start up or shut down, I thought that may be the problem had to do with my monitor but I'm not sure. I tried disk utilities and Tech Tools Pro 6 but nothing so far has helped the problem. I don't think its my harddrive since all test say its OK. Then I remembered some says something that computers have an internal battery and that they need to be replaced from time to time. I don't know if my Mac Pro has a battery but does anyone know if this would cause my problem?
There is a pram battery but I don't think that's the cause of your problem.
Have you blown all the accumulated dust out of your machine?
Try reseating the video card, maybe the ram too.
Run Apple Hardware Test (boot from your second installer DVD, push D down immediatly after the boot chime). -
Photoshop 7 Starts up and then shuts down om on one user
We have three Users on this Dell PC running Windows XP Pro. My son is handicapped and his Photoshop starts up and after running all the intro stuff simply shuts down. This does not happen on my side of the same machine.
Someone suggested clearing out some fonts. I got my list down below 500.
It did not help. Any suggestions would be welcome. Thanks!The Splash Screen goes by so quickly that it's tough to say.
It starts "Initializing" - gets one step or two past Fonts and shuts down.
I just tested my wife's side of this PC and her Phtoshop works perfectly - but, she never uses it. -
Powerbook starts up. then shuts down after a few seconds
Help!
My powerbook starts fine boots the system. gets as far as when the system shows the right hand dropdown menus then blacks out. some times the screen flickers first. It then will not start again unless I reset the PMU. then It starts fine only to repeat the problem.
I have tried it with another adapter, and its the same.
I've tried several PMU resets, and pram reset. unplugged it for several hours with he battery out programmmers button etc. But the problem persists.
Any suggestions are welcomeHelp!
My powerbook starts fine boots the system. gets as
far as when the system shows the right hand dropdown
menus then blacks out. some times the screen flickers
first. It then will not start again unless I reset
the PMU. then It starts fine only to repeat the
problem.
I have tried it with another adapter, and its the
same.
I've tried several PMU resets, and pram reset.
unplugged it for several hours with he battery out
programmmers button etc. But the problem persists.
Any suggestions at all are welcome
further to my first description, the powerbook will run start up of the battery the go to permanent sleep after a few minutes.
also and wierdly, its will run ok with the power plugged in for as long as the battery charge lasts. Then it does something similar to sleep. but without thesleep light.
I'm am really scratching my head here.
Any feedback would be gratefully recieved -
my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor songIf your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use -
My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?
Hi daveormond,
I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
Mac OS X: Gray screen appears during startup - Apple Support
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
I just upgraded to Snow Leopard then Lion and the computer shut down after installation.
Now when it starts up it gets as far as the apple icon and then shuts down again
whenever I turn it on it loads that far and then closes.
HELP!Restore your bootable backup/clone or Time Machine backup of Snow Leopard, launch Disk Utility from the install disc, repair the boot volume, and reinstall Lion.
-
I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mAThank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
W.W. -
my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that
Mac OS X: Gray screen appears during startup - Apple Support
-
Fully charged the ipod works for 2 mins, and then shuts down, why?!
Fully charged the ipod works for 2 mins, gives the battery warning and then shuts down. I took it to an apple store, they said battery is fine, restored ipod to original settings and it still wont work! Help!
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store. This time be more persistent.
Apple Retail Store - Genius Bar -
I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.
A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists. -
Application opens for 1 second and then shuts down
Obama2012 app opens for 1 second and then shuts down.
I have deleted it 3 times and reinstalled 3 times but the app continues to open briefly and then close
-
my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything
You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.
-
MacBook Pro will only last till 90% battery and then shuts down. Tried smc reset to no avail.
MacBook pro only lasts a few minutes on battery and then shuts down!
elgordo8251 wrote:
How long do these batteries usually last?
It varies. Some do not even last 1 year but others 4+ years.
Apple provides only 1year warranty.
Best.
Maybe you are looking for
-
HT204266 Updated and lost EVERYTHING! How do I get my data back??
Updated to iOS 6.1.2 and lost EVERYTHING! Apps, files, notes, 6 months of data tracking all gone and MUST have for work. Lost some apps that iTunes doesn't have listed anymore, nor are they showing up in my purchased apps. Again, I need these for
-
Is there any way to sent apex reports in mail
Hi All, I have a requirement to sent an apex report as a mail. Is it possible? Or will I have to write PLSQL procedure to collect the records and embed in html tags and then send the mail I tried to use <iframe> tag and embed the apex page which is p
-
Hi Folks, Can I make my core device to send a mail when devices under it goes down for any reason Regards Thanveer "Everybody is genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is a stupid
-
When is PI expected to handle xslt 2.0?
Hi I was wondering if anybody knows, when PI is expected to be able to accept xslt 2.0? As far as I know, in PI 7.1 only xslt 1.0 mappings are accepted. BR Mikael
-
I got a problem with my *.deploy files. My main .deploy file assemble two files : ejbs.deploy and servlets.deploy. Whenever I change the Files property in ejbs.deploy or the WEB-INF/classes property in servlets.deploy from within JDeveloper, it w