Acrobat Standard 8.17 AIP not running in Windows 7 Pro 64-bit

Hello,
I am trying to run an AIP that I created for Acrobat 8.0 (updated to 8.17) on Windows 7 Professional 64-bit. I created the AIP and then ran it on Win7RC (32-bit) and it installed fine. I have also tried this same AIP on Windows XP Pro (32-bit) and it works there.
When I try to run the same AIP on W7P x64, I get a flash of the command window and then a flash of the Adobe "Preparing to install" window and then both windows close and the installation terminates. Have tried it from the 32-bit command prompt (%windir%\SysWoW64\cmd.exe) but same failure.
Have moved the AIP package to the root of C: and run it - same failure.
Does anyone have any suggestions on how to get the AIP to work in 64-bit?
Thanks.

Hello - I have been able to get the AIP installed.
Turns out that the installation was hanging because a previous version of Acrobat was already installed. On other machines with Acrobat, I would get a window stating that I had to remove the old software but on W7 x64, the installation simply failed. After removing the old version and trying again, the new installation succeeded.
Thanks to everyone for their help.

Similar Messages

Ni usrp example are not running on window 7 64 bit

i have installed labview 2012 ,modulation toolkit, mathscript toolkit and usrp device driver 1.2. i am using window 7 64 bit operating system. i am trying to run example of usrp but it was not running it is not able to load NI-MAPro.lvlib files .any other toolkit required to be installed to run examples of ursrp ...please help i am new to usrp and labview.

well most example of modulation toolkit and other like EX FM demod sound card (queue), ex fsk tx,ex pam rx , ex pam tx, psk, QAM ....allmost all example are creating poblem..whenever i click it start loading file but it is not able load NI_MAPro.lvlib it ask for file path but i donot where these files are located.for example if i click to open FM Demod sound card (queue) example it is not able laod file NI_Mapro.lvlib:fft power spectrum for 1 chan(cdb).vi

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

BB Desktop Software 6.1 will not run on Windows 7 64-Bit

I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is. A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
Thank you all so much in advance once again! (Below is my original plea for help.)
P
Hi.
I have read in these forums and am still lost. I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
I try to be a good lil girl and follow forum rules, but am lost here.
I bought a new laptop, a Dell 17R It runs Win 7 I think. Lots of ROM/RAM. I dowloaded the desktop program from bb dot com and cannot get it to work. First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
It then acknowledged my Torch and dld my photos. Then it decided I didn't have space and undid whatever it did.
NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
I need someone who understands this gobbltygook to explain to me what to do. I need to unload my photos, as I use my phone to take pix more than I would have thought.
I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them. (It took my YEARS to spring for this laptop)
Thank you in advance for your patience.
P

I have the same issue. It gets to a desktop manager picture and just freezes.

Crystal Report XI R2 version 11.5 not run on Windows Vista 64 bit OS

We have created the Windows Vista 64 bit Development Environment with u201CCrystal Report XI R2u201D version 11.5 . When we try to run report it gives following error
"An error has ocured while attempting to load Crystal Reports runtime.
Either the Crystal Report Registery key permissions are insufficient or the Crystal Reports runtime not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or itanium) required. Please go to http://www.bisinessobjects.com/support for more information"
Then we Installed Crystal Reports redistributable from u201CC:\Program Files\Microsoft Visual Studio 8\Crystal Reports\CRRedist\X64\CRRedist2005_X64.msiu201D
and run the report we got same error.
Its working properly on Windows XP 32 bit Development Environment.
Please advice.
Thanks in advance

Couple of things to consider;
1) CR XI r2 is not 64 bit
2) The MSI you installed is for CR 10.2 which ships with .NET 2005, not CR XI r2.
3) To use CR XI r2 on Vista, you must have applied at least SP 4
For more information see the following;
[Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e]
[What versions of Crystal Reports are supported on Windows Vista in VS .NET?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259646]
[Crystal Reports v. 9.1 to 12.x VS .NET Runtime Distribution & Supported Operating Systems|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567]
Ludek

ZCM Version 10.3.3.44626 Does not Run on Windows 7 64 Bit

Hello,
I am trying to get the ZCM client running on a Dell XPS 13 with Windows 7 64 bit installed.
The first problem I have is that the install errors with "The application was unable to start correctly 0xc000007b)" and it refers to ZPA_Iface.exe. But it does install.
The real problem is it doesn't update. If I right-click on the Zen icon in the system tray and click refresh, nothing happens.
Is there anything different that needs to be done with 64bit Windows?
Thanks.

GeorgeCLP,
> Is there anything different that needs to be done with 64bit Windows?
No, but there are different agents for 32 and 64 bit.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

ITunes installs but does not run on Windows 7 64-bit

I've spent a couple hours going over advice on this forum as well as elsewhere on the Internet to resolve this. iTunes installs without a problem but when we run it, nothing appears. iTunes.exe *32 and iTunesHelper.exe *32 appear in the Windows Task Manager but there is no other evidence that iTunes is running.
I've tried installing and reinstalling. I've tried a number of different compatibility settings. Surely there must be an easy way to resolve this.
Frustrated,
Andy

The problem, as it turns out, is Bonjour. See http://discussions.apple.com/thread.jspa?threadID=2408851&tstart=0 for ideas on how to fix....

I Tunes not running on Windows 7 64 bit operating system

I have been unable to get this program to download on a new laptop. Can anyone offer a recommendation. When I attempt to Authorize the computer, the software gives an error message that it has to shut down. Remov and reinstalled software 6 times today including 11.1.1 update for 64 bit software

Same question here: http://forums.adobe.com/thread/1108086

Acrobat Standard Ver. 7 Not saving Default preferences.

Seeking help on why Acrobat Standard Ver. 7 Not saving Default preferences. Specifically, the zoom level. It always reverts back to something other than the 100% I set it at. The operating systerm is Windows 7, Pro if that helps.

As I recall, you are the first person who has reported even getting AA7 to work in Win7. Any operations with that combination are likely to work with luck. I assume you mean the preferences set under the edit menu. You might try changing AA7 to run in compatibility mode and see if that does the job.

I have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

i have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

Hi Timothy,
The account cannot be validated error was due to a glitch on our activation server that has been fixed now.
Please try using acrobat now and check if you are still facing the problem.
Regards,
Rave

Acrobat Plug In...Could not find external window handler

When I try to open a pdf file with Adobe Acrobat, my computer gives me a prompt, Acrobat Plug In...Could not find external window handler...
The problem just started recently. I am running Adobe Acrobat 6.0 and the ME version of Windows. The Microsoft help desk told me this was an Adobe problem.
Can anyone give me some advise?

Hello.
I'm getting the same problem.
Did you find a solution?
Thanks a lot

Will adobe acrobat 9 run on windows 7 64 bit

will adobe acrobat 9 run on windows 7 64 bit home premium

Hi,
You should be able to install Acrobat 9 on Windows 7 Home Premium 64-bit.
Also, here is a link that lists the minimum requirement for Acrobat products for your reference: Tech Specs Acrobat
Hope this helps.

Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

Director 11.5 "exe" not running in windows lower version

hi,
i have some project made in director mx2004 (d10) and convert it to director 11.5 but when i publish exe it will not run on windows 2000 or windows 98 (basically lower then windows xp2), have any one idea of that
thanks

This page shows the authoring and runtime OS requirements. Unfortunately, D 11.5 isn't set up to run on Windows versions earlier than XP. You may want to keep that earlier version of your .exe and make it available to users with 2000 or 98.

I have a dual boot system. Windows xp and Windows 7. Photoshop elements 7 would not run on Windows 7, so I purchased Elements 13. Slow as christmas. Not worth using at the speed it takes to do work on photos

I have a dual boot system, xp pro and 7 pro. Photoshop elements 7 runs fine on xp, but would not run on windows 7. Bought elements 13, Very, Very slow. To slow to work on photographs. I have bought new ram and done every other optimize ideas I have found online.
Any ideas. Asus anthlon 64 x 2, 4g ram, m2n e motherboard, NVidia video card, 2+ g processor

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Acrobat Standard 8.17 AIP not running in Windows 7 Pro 64-bit

Similar Messages

Maybe you are looking for