Acrobat Standard 8 CAB File corrupted.

I tried to install Acrobat Standard 8 but, I received a message that the cab file is corrupted. Can anymore provide the site where I can get a copy of the CAB file.
Thanks

If you purchased Acrobat on disk, that would be the place to look. You can call Customer Service to see if you can get a replacement disk. If you downloaded the original from the Adobe store, again Customer Service would be your only option.

Similar Messages

  • CS2-installing error "data1.cab" file corrupt

    I have recently reformatted my C drive and reinstalling programs.
    I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
    I don't know how to fix. Could someone please help?
    Thanks,
    mmspry

    from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

  • ITunes.cab file corrupt??

    I've previously upgraded my iTunes to the latest version, and after I booted my computer to complete the installation, my iTunes won't open. It says "the cabinet file 'iTunes.cab' is corrupt and cannot be used" and it won't open. If I go back to apple.com to reinstall the program, my options are to 1. repair and 2. remove. Clearly, I don't want to remove iTunes, but when I select repair, the same error message comes up. What do I do??

    It says "the cabinet file 'iTunes.cab' is corrupt and cannot be used" and it won't open. If I go back to apple.com to reinstall the program, my options are to 1. repair and 2. remove.
    The iTunes.cab is used during the installation process. iTunes uses advertised shortcuts ... so prior to launching the program, a check is run against the installation database in the iTunes.msi to make sure all the registry entries and files and whatnot that ought to be there on the PC are actually there. If some files/registry-entries/whatnot aren't there, iTunes does a repair install to replace them. Presumably, the damaged iTunes.cab is interfering with that process, causing the launch error message.
    By way of reconnaisance ... try heading into your Add or remove Programs control poanel and attempting to uninstall iTunes. Do you get an error message? if so, what does it say? (Precise text please.)
    If, on the other hand, iTunes does uninstall, try reinstalling it. Does that reinstall go through okay? if not, what error message do you get then?

  • .cab files keep corrupting in Windows XP

    Hi all,
    I'm 3 days into trying to install CS3 onto an Xp system so, if you can help me resolve this, you're a genius in my book.  :-)   I keep getting .cab file corruption errors.  I think I've tried just about every trick I could find here in the forums (e.g., copying the disc's contents first to the hard drive, creating a new user account, using CS3 clean script and MS uninstall script, updating MS Installer, and all that jazz).
    I eventually tried installing it on a different PC (Vista) and it installed fine there.  I confirmed with 7-Zip's "Test Archive" feature on that system that the cab files on the disc were indeed fine and then copied all the setup files onto a flashdrive and brought that over to the Xp system.  Strangely, no luck...it seems the .cab files get corrupted even on the flashdrive once they are added to the Xp system.  About the only I haven't tried is updating to Xp SP3 (which I'm hesitant to do as I don't want to risk messing up my other programs that work fine with SP2, especially when I don't even know it will fix it).  I read where one guy with a home network installed it using the CD-ROM from one system to install it onto the other system that he was having the install trouble with.  He seemed to believe the problem was a combo hardware/software issue.  I'm thinking of trying this but will need to get it setup.  Do both PCs need to be running the same version of Windows?  Any other possible fixes?

    confuzeled wrote:
    Any other possible fixes?
    What Flash drives have you tried? Could well be that someting goes wrong when the files get written to them. Still, since it seems you started out with the original discs on the system, that doesn't seem to be the problem. More likely some security tool is scanning the files and damaging or Windows' own DEP has for some reason been set for cabinet files. So I'd definitely look into that. the version of Windows shouldn't matter. CS3 was developed at the high times of XP, so it primarily was made for that andjust the otehr way around, Vista compatibility is the bare minimum required.
    Mylenium

  • Acrobat Reader and Acrobat Standard v9 compatibility

    What is the lowest version of Acrobat Reader that can read Acrobat Standard 9 .pdf files?

    Thank you Michael... I should have checked that out.

  • Acrobat 8 Standard - Data1.cab Corrupt

    I've been trying to get Acrobat 8 Standard installed on my Vista desktop.  At first, I was having problem with the PDF writer print driver, but in trying to resolve that, I have developed another problem.  I uninstalled Acrobat, and was trying to re-install it, but have had the installation interrupted each time I've tried, apparently because the Data1.cab is corrupt.  I tried making a copy of the CD, but got the same results.  I then tried copying the entire contents to my C: drive, then running the setup app, with the same results.
    It's odd that I'm experiencing this problem now, since I had previously installed it on this desktop with mostly successful results (other than the print driver issue).
    Can anyone offer any suggestions on how to resolve this issue?
    Thanks,
    Todd

    Quick update on this.  I tried once more to install Acrobat, and this time it seemed to work.  The app itself seems to work ok, as far as I can tell, but I'm back to my original problem of the print driver not working.  I have another posting for this problem, so I'll switch over to that posting.

  • New HDD, purchased recovery material, recovery Faliure, CAB file HP_SSRD_LOG.CAB is corrupt

    Hello,
    The Hard Drive failed and I purchased a new one. Purchaed recovery (DVD) disks. Have tried twice to recover and in each occuance recieved the error recoevery Failed.
    How do I create a PIN-log
    [13:18:01.07] ------------------------------------------------------------------------------------------
    ***CTO Error condition has been dtected in [Factory Update] phase !! ***
    [13:18:01.07] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
    [13:18:01.08] ------------------------------------------------------------------------------------------
    [12:14:51.87] Start BBOffline.cmd...
    UPDrv=[C:]
    [12:14:51.87] Set UIA Error Code to 951
    [12:14:52.17] Delete [FBI] folder.
    [12:14:52.19] WinPE is 64bit.
    [12:15:16.65] Starts [FixUps].
    [12:15:16.69] ---------------------------------------------------------------------
    [12:15:16.69] FixUps.cmd...
    [12:15:35.03] FixUps.cmd completed...
    [12:15:35.05] ---------------------------------------------------------------------
    [12:15:35.05] Starts [Tweaks for SSRD].
    [12:15:35.07] ---------------------------------------------------------------------
    [12:15:35.07] SSRD Tweaks to change user default locale...
    [12:15:35.07] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
    [12:15:35.25] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
    [12:15:49.73] ---------------------------------------------------------------------
    [12:15:49.74] Launch PININST.exe for Offline ...
    [12:17:10.23] Starts [Sleep 10 sec].
    [12:17:20.31] Starts [Create RStoneFUpdate.INI].
    [12:17:21.41] Starts [create 1GB Pagefile for offline].
     Volume in drive C has no label.
     Volume Serial Number is AE90-CC9C
     Directory of C:\System.sav\bbv
    01/23/2015  12:17 PM     1,073,741,824 pagefile.sys
                   1 File(s)  1,073,741,824 bytes
                   0 Dir(s)  35,020,972,032 bytes free
    [12:17:21.64] Brand detection.
    [12:17:21.86] Customize error handling for Specialize ~ BBV1.
            0 file(s) copied.
    [12:17:21.88] ---------------------------------------------------------------------
    [12:20:21.77] Check Win 8 configuration...
    [12:20:22.78] Check system ID...
    [12:20:23.82] Check OS SKU...
    [12:20:24.83] Check option code...
    [12:20:25.92] Check brand name...
    SKU_DEF_COUNTRY=[244]
    SKU_DEF_SYS_LOC=[en-US]
     Reset country in administrator...
     Reset country in Default user...
     Reset System locale
    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384
    Image Version: 6.2.9200.16384
    Reporting offline international settings.
    Default system UI language : en-US
    System locale : en-US
    Default time zone : Pacific Standard Time
    User locale for default user : en-US
    Location : United States (GEOID = 244)
    Active keyboard(s) : 0409:00000409
    Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
    Installed language(s): en-US
      Type : Fully localized language.
    The operation completed successfully.
     Updated System Locale info...
    [12:20:43.98] Start PIN Tweaks...
    [12:20:45.00] ---------------------------------------------------------------------
    [12:20:45.02] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
    [12:20:45.02] ----------------------------------------
    [12:20:45.02] Tweaks for OOBE's Unattend.xml
    [12:20:45.02]  to pick up the proper file...
    [12:20:45.02] ----------------------------------------
    [12:20:45.02] rename unattend.org to unattend.or_
    [12:20:45.06] ----------------------------------------
    [12:20:45.06] without Light Sensor..
    [12:20:45.09] ----------------------------------------
    [12:20:45.10] This is Restored image by SSRD [SSRD.flg]...
    [12:20:45.12] ---------------------------------------------------------------------
    [12:20:45.99] Start MIR Tweaks...
    [12:20:47.03] ---------------------------------------------------------------------
    [12:20:47.03] [MIR Tweaks] ...
    [12:20:47.03] ---------------------------------------------------------------------
    [12:20:48.00] Start Factory Update(s)...
    [12:21:55.10] Start QFE Offline installation...
    [13:18:00.80] PININST_OFF: PASSED...
    [13:18:00.88] Type C:\System.sav\Logs\BBFindEr.log...
    [13:18:00.89] Type C:\System.sav\Logs\BBFindE0.log...
    ---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
    Result=PASSED
    [13:18:01.05] Found some error at QFE Offline installation...
    [13:18:01.05] Check C:\System.sav\Logs\BBFind4QFE.LOG to see which QFE got the issue...
    [13:18:01.07] Check C:\System.sav\Logs\QFEOff\KBxxxxx.log.txt to see the detail...
    upon further investigation
    Extracting to "C:\Users\dwalke\AppData\Local\Temp\wz876d\"
    Use Path: yes   Overlay Files: yes
    The operation completed successfully.
    Extracting CTOERROR.flg
    The operation completed successfully.
    CAB file HP_SSRD_LOG.CAB is corrupt

    @Oregondeere 
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
    Cheers,
     KarolB
    I work for HP

  • Data1.cab file is present but empty after download for Acrobat Pro XI

    I am trying to upgrade to Acrobat Pro XI and have downloaded the files. The extraction process took quote a few attempts before it worked on my PC and I'm now doing the install. It get to a point where 'Error 1311 Source file not found' appears and asks me to check on the data1.cab file and retry. The file is present but is empty (0kb) so when I hit 'retry' the same message just appears again.I am downloading from Adobe direct, not from a disc and am downloading onto a PC.

    there's only one self-extracting file you need to download.  make sure your dl is complete.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Opening Pdf files in Acrobat standard

    The PDF document is all shaded in Acrobat Standard but I can read the PDF file in Reader?   Why can I not read or edit in Standard?

    All I can imagine is that the PDF is secured, corrupt, or has features from  AA X that are not in AA9, thus causing AA9 to fail.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • I have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

    i have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

    Hi Timothy,
    The account cannot be validated error was due to a glitch on our activation server that has been fixed now.
    Please try using acrobat now and check if you are still facing the problem.
    Regards,
    Rave

  • Can Acrobat Standard append to an existing file when saving?  Can Pro?

    Hello all,
    I'm wondering if Adobe Acrobat Standard has the function to save to an existing file. I don't mean append two PDF's together after they are already created. I mean I already have a PDF document which I need to add lots of additional pages to. So when creating additional PDF's, I want to be able to tell Acrobat to add those files to the end of the document I already have.
    PrimoPDF has this feature which would be a real time-saver in my line of business. In that program, you simply choose the same filename when asked to save the document. It then prompts you to overwrite or append-to the existing file. For business reasons, it would be very advantageous to use Acrobat rather than Primo. Does anyone know if Acrobat Standard can do this? If not, does Pro do it? Thanks for your time. I appreciate any feedback I get.
    Chris

    Never tried that... you might read in the Acrobat Pro User Guide Online
    http://www.adobe.com/support/documentation/en/acrobatpro/

  • Can Acrobat X Standard create PDF files from Microsoft Word, using "CMYK" color (required by most book printers) instead of "RGB" color?

    I'd like to purchase Acrobat Standard if it will let me control the color space used in the PDF it creates.  I need to send a color file to a commercial book printer, and they require the PDF file to use CMYK colors, not RGB.
    Will Acrobat Standard do this, and if so, how?  Or do I need to get a different Adobe product for this task?

    I'd like to purchase Acrobat Standard if it will let me control the color space used in the PDF it creates.  I need to send a color file to a commercial book printer, and they require the PDF file to use CMYK colors, not RGB.
    Will Acrobat Standard do this, and if so, how?  Or do I need to get a different Adobe product for this task?

  • Error 1335 the cabinet file data4.cab is corrupt and cannot be used, what do i have to do

    error 1335 teh cabinet file data4.cab is corrupt and cannot be used, what do i have to do

    Hi Max210662,
    Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .
    Regards,
    Romit Sinha

  • Corrupt CAB File

    Hello,
    I hope I have placed this in the correct forums here on TechNet. I have a corrupt CAB file and am looking on ways to correct it. We use WINRAR to open CAB files. When I attempt to open it via WINRAR I am being told "The archive is either in unknown
    format or damaged." I have multiple CAB files generating this error, but not all of them.
    Does Microsoft have a tool, or does anyone have any experience on the best way to repair these CAB files? These CAB files contain archived emails we are using with our Enterprise Vault system.
    Thanks for any assistance!

    What software creates the CAB files? (rhetorical) I'd contact their support for solutions.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Maybe you are looking for