Acrobat stop when open more then one document

Hello
when I try to open more then one PDF Acrobat hang.
I must kill the process and then I can open one PDF again.
It does not work independently I try to open the second PDF by double-click or with the menu inside Acrobat.
I use Adobe Acrobat XI (11.0.0) on a Windows 7 64-Bit system.
I try to deinstall Acrobat completly and reinstall it but without success.
I could not really say until which time it works but I know that it is working in the near past.
Can somenody tell me why it doesn´t work?
What happen? What could be the reason?

Please update the Acrobat 11 to 11.0.6 via Help -> 'Check for Updates' option  and then see if issue still exist.
Regards,
Anoop

Similar Messages

  • PSE13 repeatedly crashing when opening more than one file at a time to layer images. [was: Feeling very frustrated.]

    Just bought Photoshop Elements 13.  I have a Macbook Pro that meets all the requirements.  I have installed and reinstalled the program but it just keeps crashing.  The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?

    mikeobe wrote:
    OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
    Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
    You may not even have the problem!
    Have you installed the new printer yet?
    There are many more people who don't see it happen than those who do.
    PS: there is always a default printer.

  • PRoblem when posting more than one document

    Hi all,
    I'm using BAPI    BAPI_GOODSMOVEMENT_CREATE to post the documents for PO_GR.when i post one document through text file it is done succesfuully. when i'm posting more than one document it is giving error "posting not possible".
    My code is as follows:
    loop at i_data.
    concatenate '0'   i_data-stor_loc  into i_data-stor_loc.
    concatenate '00'  i_data-plant     into i_data-plant.
        i_item-po_number  = i_data-po_no.
        i_item-po_item    = i_data-po_item.
        i_item-move_type  = i_data-mvt_type.
        i_head-doc_date   = doc_date.
        i_head-pstng_date = post_date.
        i_head-ref_doc_no = i_data-del_note.
        i_item-entry_qnt  = i_data-entry_qty.
        i_item-stge_loc   = i_data-stor_loc.
        i_item-plant      = i_data-plant.
        i_item-stck_type  = i_data-stk_type.
        i_item-batch      = i_data-batch.
    I_ITEM-move_val_type      = i_data-move_batch.
        APPEND: i_item,i_head.
        CLEAR:i_item.
      ENDLOOP.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
       EXPORTING
         goodsmvt_header             = i_head
         goodsmvt_code               = i_code
       TESTRUN                     = ' '
      IMPORTING
      GOODSMVT_HEADRET            =
        MATERIALDOCUMENT            = matdoc
       MATDOCUMENTYEAR             =
       tables
         goodsmvt_item               = i_item
       GOODSMVT_SERIALNUMBER       =
         return                      = return
      IF return IS INITIAL.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
      LOOP AT return.
        WRITE: return-message.
      ENDLOOP.
      WRITE: matdoc.
    PLease specify where i'm going wrong.
    Regards,
    SImha.

    Hi,
    I had used the same FM to post multiple documents, but never faced this error.
    *- Header
      MOVE: sy-datum TO bapigm_head-pstng_date,
            sy-datum TO bapigm_head-doc_date,
            sy-uname TO bapigm_head-pr_uname,
            v_mblnr  TO bapigm_head-ref_doc_no,
            con_bfwms_bestand TO bapigm_head-ext_wms.
    *- Item
    *- Populate item data
      LOOP AT i_items_trans.
        CLEAR ibapigm_item.
    *- Convert the matnr backto 18 char form (External)
        CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
          EXPORTING
            input            = i_items_trans-matnr
          IMPORTING
            output           = i_items_trans-matnr
          EXCEPTIONS
            number_not_found = 1
            length_error     = 2
            OTHERS           = 3.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        ibapigm_item-material   = i_items_trans-matnr.
        ibapigm_item-plant      = i_items_trans-werks.
        ibapigm_item-stge_loc   = i_items_trans-lgort.
        ibapigm_item-move_type  = '101'.   "Goods Receipt
        ibapigm_item-mvt_ind    = 'B'.     "Goods Movement for PO
        ibapigm_item-po_number  = i_items_trans-ebeln.
        ibapigm_item-po_item    = i_items_trans-ebelp.
        ibapigm_item-entry_qnt  = i_items_trans-ktmng.
        ibapigm_item-entry_uom  = i_items_trans-meins.
        APPEND ibapigm_item.
      ENDLOOP.
    *-Call FM
      CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header  = bapigm_head
          goodsmvt_code    = bapigm_code
        IMPORTING
          goodsmvt_headret = bapigm_headret
        TABLES
          goodsmvt_item    = ibapigm_item
          return           = ibapigm_ret.
    *- Commit on Success
      IF NOT bapigm_headret-mat_doc IS INITIAL.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Regards,
    Raj

  • Pages 5.0--I can't open more than one document at a time.

    Pages 5--I can't open more than 1 document/file.  I can look up files in iCloud/computer, click to open, but the file never opens in Pages 5.  I have to quit Pages, reopen to get another document (but still cannot open more than that first doc).  I still have Pages 4.3, and I can open multiple documents.  Is this a bug, or is there some funky routine I have to go through?

    Pages 5--I can't open more than 1 document/file.  I can look up files in iCloud/computer, click to open, but the file never opens in Pages 5.  I have to quit Pages, reopen to get another document (but still cannot open more than that first doc).  I still have Pages 4.3, and I can open multiple documents.  Is this a bug, or is there some funky routine I have to go through?

  • Problem with opening more then one file in Adobe Acrobat X Pro - nvd3dum.dll

    Hello,
    I have Adobe Arobat X Pro version: 10.0.1.434. Everything works great up to now. Last time I done upgrade my system to windows 7 64bit with SP1. When I open pdf file in adobe acrobat everything works great, but when I open second file, I receive this problem that Adobe acrobat stopped working and I receive this error : nvd3dum.dll. I have red somewhere that it will be due to driver to graphic card or DirectX. I upgraded them to a new but nothing, problem still remained.
    Here is problem details:
      Nazwa zdarzenia problemu: APPCRASH
      Nazwa aplikacji: Acrobat.exe
      Wersja aplikacji: 10.0.1.434
      Sygnatura czasowa aplikacji: 4d457194
      Nazwa modułu z błędem: nvd3dum.dll
      Wersja modułu z błędem: 8.17.12.6658
      Sygnatura czasowa modułu z błędem: 4d27c323
      Kod wyjątku: c0000005
      Przesunięcie wyjątku: 003814fb
    Anybody tell me what must I do to disolve problem to open not only one but two, three .... and so on. Has anyone noticed the same problem at home?
    Thank all for advice
    marbross77

    Hello Dave
    the Problem affects all Uniplot 3d Files. I start with an Excel or .txt file with 3 columns and uniplot creates an engine diagram similar to this one: http://www.uniplot.de/documents/de/_images/Uni_BSP7-2.png
    Uniplot can Export this as a .u3d but it can not be opened with Adobe. Then I tried to open the .txt.file with MeshLab. I can see the correct Points (which Uniplot uses to create the engine diagram) but of course they are not connected. If i Export those Points in MeshLab as a .u3d file, Adobe can not work with it.
    I do not know how to deal with this Problem. Do you have any suggestions?
    Thanks in advance for your help

  • Can't open more than one document at a time

    I have to open a few text documents. No matter of they are three or six, sometimes it will open but most of times, they won't. Also, Pages won't start after jumping for a while in the Dock.
    If you open the documents from the Open menu it will work but the Dock icon is buggy.
    There is no way to fix this as this may be a bug that sometimes happens and other times does not…
    But thanks for reading.

    Thank you again for taking the time to reply again in this topic.
    "The latest" Pages app only can be… the latest version released, but again I can confirm as in my previous comment, YES the version is 4.3. There can be only *one* latest version possible! Pages 08 can't be the "latest".
    Aside, yes, as I commented I created the Pages icon dock again but the problem is still happening. Also, I'm referring to full documents, not parts of them. One of three documents won't open, for example.
    Computer is up to date, permissions are Ok, etc. No problem on maintenance.
    The documents are .doc or .docx, not templates, not uncommon documents, not .dotx files. Just text document they made using Windows. I'm a graphic designer and I receive the localizations to translate Photoshop designs into 5 or 6 languages, so they send me those texts in one document each language, so the files are small, 1 page documents with no images, macros or anything else than a few text lines.
    I've been using Pages for many years now and can't remember when it started to behave like this. Sometimes I just open those documents with Text Edit because it's faster and never fails.
    If I open the documents dragging them to the dock icon, one by one, with Pages all of them will open fine. If I use the menu option, the documents will all open fine. It just fails when opening a bunch of them using the dock. Sometimes three out of five are open, in rare cases all of them are open or Pages is just stalled and won't do anything.
    One example. I dragged all of these documents to Pages icon in the dock.
    Five of them opened instantly except the last one: "Traducción mailing Son Antem_RU.doc".
    If I drag this single document to the dock, it opens just fine like all the others. If I choose this one and 4 others, all of the five docs open fine. It looks like if there was a limit to open documents at a time from Pages dock icon, but this doesn't make any sense, I can open 15 documents at the same time from Photoshop, for example.
    If I open all these 6 items from the menu File > Open… all of them are opened, no problems.
    This eandom behaviour with no sense at all made me wanted to know what's happening with my Pages! It's really bothering me. Maybe I'll just have to change my habits and start using the File menu but I'm more of a drag and drop person.
    Thanks for your attention and bearing with this little, but annoying problem.

  • Cannot open more then one PDF file at a time without crashing

    Started having a issue where if I try to open multiple PDF files Acrobat Reader closes. The most I can have open is one. If I go to open a second pdf file it looks like it will open but then it closes and takes the first window down with it. Installed 9.3.2, Uninstalled and Reinstalled along with running a repair. Any ideas would be greatly appreciated. Thanks.

    It turns out that it was the 2D graphics acceleration feature in Adobe Reader.  The problems would go away when disabling the acceleration but went away when the video driver was updated.  It would be easy to assume it was a problem with the original video driver, but it's not always such an open and shut case.  It could be that Adobe Reader just doesn't properly identify what acceleration is supported before it tries to use it.

  • Web Browser Session Hangs When Opening More Than One Query

    Let me start off with the BW environment - we are on BW release 3.50 at support pack level 12. Basis component is release 6.40 at level 12.
    We have a situation where a web browser HTTP session "hangs" while trying to execute more than one query at a time. A role based menu template is used by our end-users to run queries. The end-users execute a query and while it is running, try to execute a second query. But the web browser for the second query does not become available until the first query is complete.
    The following is the detailed steps of the process:
    1. From my user menu in BW, expand the folder for Role Z: BW_REPORTING and click on SAP_BW_TEMPLATE – Web_Role_Menu. Web browser window will open.
    2. Within the ZTPL_Role_Menu_Reporting web page, select Role Z: FUNC_DEVELOPER > BW Reporting > Controlling > Profitability Analysis > Detail query. (Role Z: FUNC_TESTER can be used in this example as well, just follow the same menu path).  Click on Detail and another web browser window will open for the query selection screen.
    3. On the selection screen for the CO-PA Detail query, enter values and execute the query.
    4. While the CO-PA Detail query is executing, go back to the first opened web browser for ZTPL_Role_Menu_Reporting and go to Role Z: FUNC_DEVELOPER > BW Reporting > Controlling > Profitability Analysis > Operating Concern query. Run the CO-PA Operating Concern query while the CO-PA Detail query is still executing. The session for the Operating Concern “hangs” and does not display the selection screen until the CO-PA Detail query has completed. Once the Detail query has finished, then the second query, CO-PA Operating Concern will then display the selection screen for the query.
    Our end-users expect the second query to display the selection screen immediately with no delay. The end-users do not want to wait for the selection screen of the second query. They want to be able to execute the queries simultaneously.
    Our Basis group as tried adjusting some parameters and has implemented OSS note 853396, but the issue still exists.
    Is it a BW issue or is it an issue with MS Internet Explorer?
    Your input and suggestions are appreciated.
    Thanks.

    Hi.
    I had a somewhat similar issue earlier when I tried closing BW Query windows, it would freeze and wouldn't close. I resolved the issue by turning off some BHO (Browser help Objects) in IE.It can be done using IE>Tools>Manage Add-Ons
    Cheers
    Anand

  • Opening more than one document

    Every time I open a document (Word, Excel, pdf), the last one (or even two) documents I had been working on (even on the previous day) also open. How do I get this to stop happening, so that the only document that opens is the one that I want to work on?

    Uncheck the box I've outlined in the image:

  • B85-G43 A2 boot error when connecting more then one SATA driver

    Hello everyone please help me.
    As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
    Already changed cables, hard drives, and problem persist!
    Sorry for my bad english, not my main language.
    Board: MSI b85-g43
    Bios: c.40
    VGA:   amd 7970 black edition
    PSU:   xfx pro1000w
    Intel Core i5-4670K
    MEM: HyperX 1600 8gb
    HDD: kingston 120gb ssd and two SATAS
    OS: Windows 7 64bit Ultimate

    Svet, thx for replying.
    I'm a noob here and have some doubts about this steps...
    1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
         A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
         B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
         C.) Insert your FAT32 formatted usb stick. (Ok got it)
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
    Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
    Thank you for your time!!!

  • Rendering problem when viewing more than one document

    Hi
    I have a weird problem. When I open two or more documents the rendering of the pages gets extremely bad for all documents except the first one, which remains just fine. What to do?
    BR
    Christian

    Hi
    I have a weird problem. When I open two or more documents the rendering of the pages gets extremely bad for all documents except the first one, which remains just fine. What to do?
    BR
    Christian

  • ORA-19228: XPST0008 -- undeclared identifier when using more then one var.

    HI Gentlemen,
    Given an XMLTYPE table with only one row. Under the root element there is a <header> and a <body> where the stuff inside the body has a different namespace. When I try to drill down with the statement in p.sql below, I always get
    SQL> @c:\xsl\p
    FROM z
    FEHLER in Zeile 10:
    ORA-19228: XPST0008 - nicht deklarierter Identifier: Präfix 'j' lokaler Name '' (undeclared identifier)
    I also tried to insert a WHERE clause, it always complains with $j. When I am using only one variable, $i, it is OK. XML DB Developer's Guide has examples that are very close to this--they execute A1. CAn you help me where am I wrong?
    Thank you very much, kind regards
    Miklos HERBOLY
    SELECT
       XMLQuery('xquery version "1.0"; (: :)
       declare namespace n1="urn:ehd/001"; (: :)
       declare namespace n2="urn:ehd/go/001"; (: :)
       for $i in /n1:ehd/n1:header
    let $j := /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
       return $i,$j'
       PASSING xml_document
       RETURNING CONTENT) as ziffer
      FROM z
    /

    Hi Miklos,
    You'll need parentheses to indicate that you're returning the sequence of $i and $j :
    xquery version "1.0"; (: :)
    declare namespace n1="urn:ehd/001"; (: :)
    declare namespace n2="urn:ehd/go/001"; (: :)
    for $i in /n1:ehd/n1:header
    let $j := /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
    return ($i, $j)or shorter version (if there's only one header per document) :
    xquery version "1.0"; (: :)
    declare namespace n1="urn:ehd/001"; (: :)
    declare namespace n2="urn:ehd/go/001"; (: :)
      /n1:ehd/n1:header
    , /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
    )

  • Dynamic sotring unpossible when have more then one group!

    Hi Folks!
    I have problem that is bothering me for two days. I would like to have dynamic sotring on my report but it is not possible when i have two groups. It is working only if i have one. If i have two it sorts by the first column in the group. I try to set property break order to none but then i get an error REP-1259: Group 'GroupName' has no break columns. Please advice me what are my options.

    Hi,
    the order-by statement, whcih can be dynamic via lexical parameters is only relevant for the lowest group. For the other groups the Property is relevant and it must be set for at minimum one column in every group. That's what you have seen.
    What you can do is, to create a formula column in an upper group, use the sort-order for this column and set the formula column with that information you want to use for sorting.
    Regards
    Rainer

  • How do I open more than one document at a time?

    I can open only on pdf at a time in Reader. Help!

    It's really unfortunate that Microsoft decided to call their Windows PDF viewer app "Reader."
    The Microsoft Windows 8 Reader app is NOT the same as the Adobe Reader XI app. Any questions about features or issues should probably go to the Microsoft support website, note here.
    That said, the MS app should support switching between multiple open files. See this FAQ page for moreinformation:
    Reader app for Windows: FAQ - Windows Help
    mh++

  • Illustrator CS6 freezing with more than one document

    I have always had multiple files open at a time when using illustrator but all day today the program has been freezing everytime i open more than one document. I am able to use the program now if i only have one file open but it freezes as soon as i open the second file. I have restarted my computer twice and i have closed every other program on my computer and none of that helped. I have a macbook pro and i save all of my illustrator files on an external hard drive. As any one else experienced this?
    Thanks for the help

    Have you added any Illustrator plug ins or software recently, or enabled new fonts? Try working with some other doumcnets if you have not, to help narrow down if this is a global problem affecting all documents.
    Create a new user account and log in as that
    Run applications /utilities/disk utility and fix permissions
    Is there a common image used in these doucments, may be corrupt and sometimes opening and resaving a .psd for example

Maybe you are looking for