Acrobat Video Not Viewable By Others

I have downloaded the Acrobat 9 Pro demo to test out the
video options. When I embed a flash video as a url and then attach
the acrobat document to an email, I can view the video after
clicking on it but others in my office cannot. I have put the flv
on an intranet webserver and then an internet webserver. The two
other users see the video control with the button but it cannot be
clicked to start. The flv is only 900kb. The other users have
Acrobat 7. Is this a limitation of the demo version or do they need
Acrobat version 8 and above?
Btw - the other users can see the same flv when it is
embedded as a file but the email becomes too big and the video
still didn't play - they could just see the poster image and hear
the audio.

Dear gregeaus5,
Thank you for your post. These forums are specific to the
Acrobat.com website
and its set of hosted services, and do not cover the Acrobat
family of desktop
products.
Please visit the following forums for any questions related
to the
Acrobat family of desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Kind regards,
Lao Ma

Similar Messages

Video not viewable when published

I have tried posting a video to the web. I have used the podcast pages and the movie page. Neither one works. I called apple, and the guy that I talked to said that it might be a size issue. So, I tried posting a very small version of the video, and it still was not viewable once published.
What appears when I click on the page is a transparent quicktime "Q" with a question mark over it. When I tried publishing the video as a podcast the rss that iweb assigned was the address. Can someone tell me how to fix this?

What format is the video? I have uploaded a 50MB (just to test I could do it) video to iweb pages exported from imovie '06 and also used Quicktime to compress for web. Visual Hub is also good for compressing videos for the web.

Video Not Viewable from Jabber Client To SX20

Good morning,
We are testing out the jabber for Windows client and the only way that we can get it to connect is by forcing the H323 protocol (ie:H323:[email protected]) and initiating from the SX20. When we do this, we can only see and hear what is going on at the SX20 and the SX20 shows no audio / video from the Jabber client.
We we try to connect directly to the SX20, it says that the device is offline.
Is the jabber client able to support audio and video over H323 ?
Thank you

Hi Jesse,
In order for this to happen you would either need to register your SX20 to a SIP provided service like Cisco Webex Telepresence or obtain and configure your own VCSe and register your SX20 against that. The VCSe would then require to have a SIP SRV DNS record setup. You may also need a valid cert installed on the VCSe from here:
https://supportforums.cisco.com/docs/DOC-23938. However, this may not be required if you are not going to use TLS.
Regards,
Jason

HTML Signature that is not viewable by other recipients

I have a signature that I use for my company. It is a png file that is about 7k. Some recipients see the signature logo at the bottom of the emails and some do not. What do I need to do so that all email recipients see the logo?

You sure can!
Here's a tutorial I used to do this: http://allforces.com/2006/04/14/css-signatures/
Basically, you create an HTML signature using CSS. The trick is to put the image online, and point to it in you HTML file. For example, the picture I use in my signature is actually stored on my googlepages site. I found the URL of the file, then used that in my HTML file. When others open the email, the image displayed is from googlepages, not anything that was attached to the email. The downside is that if someone uses a program like Mail, if they look at the email when they are offline, the image won't display.
The tutorial shows you how to replace a signature file created by Mail with one of your creation - a bit convoluted, but it worked.
Lastly, I haven't asked others what they see from their various email providers. Gmail will pull it up with no pictures and give users the option to either display pictures or not. Outlook shows it fine... not sure about anything other than that.
Let me know if you want an example file you could work with if you are unfamiliar with HTML and CSS. I was clueless but found my way using the site above and the various HTML/CSS tutorials available online.
Thanks for reading my novel.
-John

IWeb '08 Site - Published to MobileMe Account - Not Viewable by Others

I'm new to iWeb. I created a simple site with a few pages, and then "Published All" to MobileMe. When I view the site, it looks fine. When others try, they get the "Are you looking for something on MobileMe?" page. I have looked at the "site inspector" to be sure that the site is not "private".
I've been reading and reading and can't find a solution. Is there a trick to this?

I got to your site using both of those addresses.
People are probably missing a dash or missing the correct capitalizations. If any of those capitalized letters are typed in lowercase you get that "looking for something" page.
If you want people to be able to type in a simple web address to get to your site, you probably need to acquire a simpler domain name ( from Go Daddy for instance) and then point it to your mobile me account.
I have two domain names registered: www.phelpssculpture.com & www.phelpsculpture.com ( one has two s's and one has only one) these are registered with Go Daddy and point to my mobileme website:
http://web.me.com/phelpssculpture/Site/home.html
So on a business card I can put the simpler PhelpsSculpture.com and people reach my site by typing that into there web browser. The capitalization doesn't seem to matter on the GoDaddy shortened address, but it does seem to matter if you miss capitalize the mobileme address.
Hope this helps,
David

Itunes purchases.... not viewable on other computer device.

I purchased an album in itunes on one of my computers, now I am trying to view my purchase and enjoy it on my other computer but nothing showing up in my library. How can I liesten to my purchases on my other computer device?

Delete and redownload them if doing so is free in your country.
(83028)

(PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) is working in one document but not in any other

Hello,
I am using (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) to get the line breaks in a pdf document. I'm getting the correct results on the plugin_apps_developer_guide.pdf (The reference guide for plugin development to Adobe Acrobat), but not on any other pdf document. I've tried the code on both tagged and un-tagged document, but only this document is giving me the right result.
Can anyone please guide me what can be the possible reason in this and how this can be handled.
Thank You
Vaibhav

Hi Srikanth,
1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
dim objcmd as new OledbDataAdapter _
("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
2. use
Dim ds As New DataSet()
Sinclair

After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

After yesterday's update sent a personal video it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
On my own windows operated laptop when l open the video the start button is crossed through
Is there something l need to do? I can view the videos fine on my iPad ?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Videos playing but not viewable... Quicktime?

Any iTunes videos I have are suddenly not viewable (the screen has lines throuigh it and multi-colors). The audio is fine.
I tried uninstalling and then reinstalling QuickTime to no avail. Now I'm wondering if I need to uninstall iTunes and Quicktime and then reinstall.
My question: since all of my music is on my iPod, when I plug it back into the computer after the reinstall, will it automatically transfer my library back to iTunes on my computer?
Thanks!

Uninstalling & reinstalling iTunes shouldn't affect your actual music & video files.
Make a backup of your itunes library.itl file before you begin, though - the 2 files mentioned here:
http://docs.info.apple.com/article.html?artnum=93732
Put them on a USB drive or just somewhere else on your C: drive.
But anyway - as for the video problem, have you seen this article?
http://docs.info.apple.com/article.html?artnum=305392

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

Album photo/video widget not supported by Other launchers?

Hi,
I seemed to notice that the album photo/video widget is not supported by other launchers(e.g. I use Nova Launcher). Walkman widget recently was supported and I can add the widget even I use other launcher(this was not possible before in JB 4.1.2). Does anyone have any idea on this issue or is this a valid concern or not?
Thank you!

It's currently not possible to use our photos and videos widget on a 3:rd party launcher. We added this for Walkman with the latest update for the Walkman app but i don't know when/if it will be supported by Album.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT3775 video shot in my iphone not uploading like other video s are from iphone , to iphoto, to drop box

a few of my iphone videos not uploading into drop box, but others did??

Everything you've mentioned points to an issue with the home Wi-Fi.
Try forgetting the connection in Settings > Wi-Fi.
Restart the device and then connect to the Wi-Fi.

Yahoo video and other video not playing

Yahoo and other video not playing in firefox 37.0.2
They played automatically 5 days ago....since then video screen is blank...no 'play' button
I have updated Flash several times
Tried to play these videos on IE....don't play there either.
Thanks for your help!

Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 15.0 r0
#Shockwave Flash 17.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Videos from Yahoo or other websites not working properly in Safari

Videos from Yahoo or other websites are not working in Safari on Ipod Touch. I downloaded the plugin, but still it does not work.
Is this functionality supported?

Mr. Jobs, who for some reason can't get an Apple employee avatar (seems strange doesn't it?) is correct that there is no Flash plugin for the iPhone/Touch. Apple did not want to use Flash lite for the the iPhone, which has a full browser, and according to the CEO for Adobe they underestimated the difficulty level in creating a version for the iPhone/Touch. He did say the "ball is in their court", and that Apple (that has had previous battles with Adobe) did have engineers working to help them.
Of course now that the CEO of Apple is calling their code "hideous" the cooperation may end.

Acrobat Video Not Viewable By Others

Similar Messages

Maybe you are looking for