Acrobat X (10.0.2) trows Error when SaveAs with relative paths
Hi,
I'm wondering if this is a bug in Acrobat X.
When I try to execute the script
this.saveAs("../TEST.pdf"); or this.saveAs({cPath: "../TEST.pdf"}); it always throws this exception.
UnsupportedValueError: Value is unsupported. ===> Parameter cPath.
I did a cross-check with Acrobat 9, there both scripts are working fine and my file is saved into the parent directory.
What's going on here?
That's courious,
a moment ago it doens't work.
I thought, it may be because of an restriction to the system drive (C:\).
So I tried it on another drive, but the same result, again, again, again...
Now, after I killed the whole Acrobat processes it works on every drive, from the console and through a folder level script for local drives and also network paths.
On another computer I got the exception again.
But then, after I executed the saveAs once with an absolute path it also works with relative paths.
What the hell?
Similar Messages
-
Pragma error when compiling with SDK X
Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
MagdaWithout seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378 -
Error when working with TableView using JCA
Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
<u>Java file.</u>
public class DisplayComponent extends PageProcessorComponent {
public DynPage getPage() {
return new DisplayComponentDynPage();
public static class DisplayComponentDynPage extends JSPDynPage {
private JCATviewBean bean;
public void doInitialization() {
IPortalComponentProfile profile =
((IPortalComponentRequest) getRequest())
.getComponentContext()
.getProfile();
Object o = profile.getValue("myBean");
if (o == null || !(o instanceof JCATviewBean)) {
bean = new JCATviewBean();
profile.putValue("myBean", bean);
} else {
bean = (JCATviewBean) o;
// fill your bean with data here...
IPortalComponentRequest request =
(IPortalComponentRequest) this.getRequest();
doJca(request);
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Report.jsp");
private IConnection getConnection(
IPortalComponentRequest request,
String alias)
throws Exception {
IConnectorGatewayService cgService =
(IConnectorGatewayService) PortalRuntime
.getRuntimeResources()
.getService(
IConnectorService.KEY);
ConnectionProperties prop =
new ConnectionProperties(
request.getLocale(),
request.getUser());
return cgService.getConnection(alias, prop);
public void doJca(IPortalComponentRequest request) {
IConnectionFactory connectionFactory = null;
IConnection client = null;
String rfm_name = "BAPI_COMPANYCODE_GETLIST";
try {
try {
// pass the request & system alias
// Change the alias to whatever the alias is for your R/3 system
client = getConnection(request, "MyIDES");
} catch (Exception e) {
System.out.println(
"Couldn't establish a connection with a target system.");
return;
Start Interaction
IInteraction interaction = client.createInteractionEx();
IInteractionSpec interactionSpec =
interaction.getInteractionSpec();
interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
RecordFactory recordFactory = interaction.getRecordFactory();
MappedRecord importParams =
recordFactory.createMappedRecord(
"CONTAINER_OF_IMPORT_PARAMS");
IFunctionsMetaData functionsMetaData =
client.getFunctionsMetaData();
IFunction function = functionsMetaData.getFunction(rfm_name);
if (function == null) {
System.out.println(
"Couldn't find " + rfm_name + " in a target system.");
return;
How to invoke Function modules
System.out.println("Invoking... " + function.getName());
MappedRecord exportParams =
(MappedRecord) interaction.execute(
interactionSpec,
importParams);
How to get structure values
IRecord exportStructure = (IRecord) exportParams.get("RETURN");
String columnOne = exportStructure.getString("TYPE");
String columnTwo = exportStructure.getString("CODE");
String columnThree = exportStructure.getString("MESSAGE");
System.out.println(" RETURN-TYPE = " + columnOne);
System.out.println(" RETURN-CODE = " + columnTwo);
System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
IRecordSet exportTable =
(IRecordSet) exportParams.get("COMPANYCODE_LIST");
exportTable.beforeFirst();
// Moves the cursor before the first row.
while (exportTable.next()) {
String column_1 = exportTable.getString("COMP_CODE");
String column_2 = exportTable.getString("COMP_NAME");
System.out.println(
" COMPANYCODE_LIST-COMP_CODE = " + column_1);
System.out.println(
" COMPANYCODE_LIST-COMP_NAME = " + column_2);
// create the tableview mode in the bean
bean.createData(exportTable);
Closing the connection
client.close();
} catch (ConnectorException e) {
// app.putValue("error", e);
System.out.println("Caught an exception: \n" + e);
} catch (Exception e) {
System.out.println("Caught an exception: \n" + e);
<u>Bena file</u>
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
public DefaultTableViewModel model;
public TableViewModel getModel() {
return this.model;
public void setModel(DefaultTableViewModel model) {
this.model = model;
public void createData(IRecordSet table) {
// this is your column names
Vector column = new Vector();
column.addElement("Company Code");
column.addElement("Company Name");
// all this logic is for the data part.
Vector rVector = new Vector();
try {
table.beforeFirst();
while (table.next()) {
Vector data = new Vector();
data.addElement(table.getString("COMP_CODE"));
data.addElement(table.getString("COMP_NAME"));
rVector.addElement(data);
} catch (Exception e) {
e.printStackTrace();
// this is where you create the model
this.setModel(new DefaultTableViewModel(rVector, column));
<b>JSP File:</b>
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<br>
<hbj:textView id = "tv1" text = "<b>TableView Example Using JCA</b> <br>"/>
<hbj:tableView
id="myTableView1"
model="myBean.model"
design="ALTERNATING"
headerVisible="true"
footerVisible="true"
fillUpEmptyRows="true"
navigationMode="BYLINE"
selectionMode="MULTISELECT"
headerText="TableView example1"
visibleFirstRow="1"
visibleRowCount="30"
width="500 px"
/>
</hbj:form>
</hbj:page>
</hbj:content>
<b>Error when Executing this component:</b><u></u>
Portal Runtime Error
<b>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file</b>
If anybody find the error please reply to this post.
Regards,
sireesha.Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
<b>Here the log file:</b>
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job# -
IDoc_02_Error passing data to port-Communication error when sending with HTTP
Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari -
Work flow in error when executed with a user decision.
Hi,
I am executing a workflow for notification of absence. It has a user decision step to Revise the request or to withdraw it when the absence request is rejected by the approver. When I am executing this the workflow is going into error state. User decision step is not starting at all. The first two steps create notification of absence and check notification are getting completed successfully.
Please let me know where I am going wrong.
Thanks & Regards,
Soumya.Hi,
I believe the orginal poster is following the workflow tutorial in the sap help.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/fb/135962457311d189440000e829fbbd/frameset.htm
I'm following the instructions and pretty sure it's been followed exactly on each step but am hitting the same issue - see 'Unit 10 - third step'.
The log is reporting two errors
Work item 000000014093: Object FLOWITEM method EXECUTE cannot be executed
and
Error when processing node '0000000039' (ParForEach index 000000)
You reject the notification and then the work flow errors.
Can anyone help? -
Error when opening PowerPoint related to Data Execution Prevention Mode
I am experiencing an error when attempting to open a PowerPoint file. . Here is the full message: "powerPoint is experiencing a serious problem with PowerPoint com add in. This add-in is incompatible with Data Protection Execution Mode and should be disabled or upgraded to the latest version. Do you wish to disable?" I am using PowerPoint 2010 and Adobe Presenter version 8.
I've continually experience the same issues. I have updated to Presenter 8.02.
If I open a project by double-clicking the .pptx file I get the following error message:
"Run-time error '-2147467259 (80004005)
SlideShowWindow (unknown member) :Invalid request. Automation rights are not granted."
If I then enter the Presenter tab and click an option (for instance "Settings") Powerpoint crashes and restarts itself. Once restarted the following error message is presented:
"PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com adding' add-in. This add-in is incompatible with Data Execution Prevention mode and should be disabled or upgraded to the latest version. Do you wish to disable this add-in from loading?"
I can often crash Powerpoint with the same DEP warning by closing the presentation with the window's "X" button - Powerpoint restarts itself and gives the same DEP warning as above.
I normally choose to not disable and continue working. If I then go to "Settings" in Presenter again, it will open without problem. It seems that after four to six occurences like this, Presenter will then be disabled by Powerpoint and require resetting in the File-Options-Addins section.
Alternately, if I open Powerpoint first and then open my project through the File-Open or Recent Presentations list I do not get the Run-time error mentioned above and usually can open a Presenter option ("Settings") without crashing Powerpoint. I can also close the project without incedent if I use the File-Close menu as opposed the the "X" button.
I am running Win 7 64bit, Powerpoint 2010 32bit with Presenter 8.02.
Sincerely hoping support is continuing to monitor these threads, as this one was started in November without much response. -
Min Mx planning report gives an error when run with RE-Stock yes.
Hi All,
We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
what are the additional setups need to be done for it?
It works fine when running with re stock no.and gives the out put of the report accurately.
Thanks.
MPHHi Garry,
These are the parameters and error codes are also given.
P_ORG_ID='328'
P_LEVEL='1'
P_SELECTION='3'
P_CAT_SET_ID='1'
P_CATG_STRUCT_ID='101'
P_SORT='1'
P_D_CUTOFF='2009/07/03 00:00:00'
P_D_CUTOFF_REL='0'
P_S_CUTOFF='2009/07/03 00:00:00'
P_S_CUTOFF_REL='0'
P_USER_ID='5411'
P_RESTOCK='1'
P_DD_LOC_ID='32488'
P_NET_UNRSV='1'
P_NET_RSV='1'
P_NET_WIP='1'
P_INCLUDE_PO='1'
P_INCLUDE_MO='1'
P_INCLUDE_WIP='1'
P_INCLUDE_IF='1'
P_INCLUDE_NONNET='2'
P_LOT_CTL='3'
P_DISPLAY_MODE='1'
P_SHOW_DESC='2'
P_PUR_REVISION='2'
*MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.* -
Errors when unmarshalling with JAXB
Am getting an error when unmarshalling an xml file .....
javax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: unexpected root element comment]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:298)
at com.sun.xml.bind.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:146)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:131)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:136)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:145)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:163)
at PurchaseOrderClient.main(PurchaseOrderClient.java:18)
My .xsd file is like ----
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="comment" type="xsd:string"/>
</xsd:schema>
and .xml file is ----
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 sp2 U (http://www.altova.com)-->
<comment xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Projects\marshall\sample.xsd">String</comment>
Am running through stand alone java code as below ---
import generated.*;
import java.io.File;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Unmarshaller;
public class PurchaseOrderClient{
public static void main(String[] args) {
try{
JAXBContext jc = JAXBContext.newInstance("generated");
Unmarshaller unmarshaller = jc.createUnmarshaller();
Object po = null;
po = (Name)unmarshaller.unmarshal(new File("sample.xml"));
System.out.println(po.toString());
catch(Exception e)
e.printStackTrace();
plz help me out.
Aditya.Am getting an error when unmarshalling an xml file .....
javax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: unexpected root element comment]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:298)
at com.sun.xml.bind.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:146)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:131)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:136)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:145)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:163)
at PurchaseOrderClient.main(PurchaseOrderClient.java:18)
My .xsd file is like ----
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="comment" type="xsd:string"/>
</xsd:schema>
and .xml file is ----
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 sp2 U (http://www.altova.com)-->
<comment xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Projects\marshall\sample.xsd">String</comment>
Am running through stand alone java code as below ---
import generated.*;
import java.io.File;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Unmarshaller;
public class PurchaseOrderClient{
public static void main(String[] args) {
try{
JAXBContext jc = JAXBContext.newInstance("generated");
Unmarshaller unmarshaller = jc.createUnmarshaller();
Object po = null;
po = (Name)unmarshaller.unmarshal(new File("sample.xml"));
System.out.println(po.toString());
catch(Exception e)
e.printStackTrace();
plz help me out.
Aditya. -
SAML Sender-Vouches errors when using with OWSM
Hi,
We have configured OWSM Policy 'SAML - Verify WSS 1.0 Token' with Allow signed assertions only. We have created jks Trust store location and configured policy to refer to the file with appropriate password.
We have created proxy security to Sender-Voches signed and to sign outbound message.
We are getting following error when we try to run the proxy.
javax.xml.rpc.soap.SOAPFaultException: SAML token verification failed
at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:555)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at vigni4.oracle.srtutorial.datamodel.proxy.runtime.TimeServiceSoap_Stub.getTime(TimeServiceSoap_Stub.java:79)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.getTime(TimeServiceSoapClient.java:41)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.main(TimeServiceSoapClient.java:29)
Process exited with exit code 0.
and Error in gateway.log is
2007-09-01 18:58:56,561 WARNING [RMICallHandler-58] saml.VerifySAMLStep - SAML Token verification failed:
Can any provide information on how to resolve the issue?We have also noticed that correct message is reaching OWSM.
Attaching the same.
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="urn:Test:GetTime">
- <env:Header>
- <wsse:Security env:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="_FNfXFOVi1OcPKSyRUAHDyw22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">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</wsse:BinarySecurityToken>
- <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
- <dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <dsig:Reference URI="#mvDwzM5hZWAdG6n5tKLufA22">
- <dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>zBFquf+Y0ngNapyK4Xq0Jws1FPM=</dsig:DigestValue>
</dsig:Reference>
- <dsig:Reference URI="#nwWnNm69TPcdyp0yT8fa7g22">
- <dsig:Transforms>
- <dsig:Transform Algorithm="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform">
- <wsse:TransformationParameters xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</wsse:TransformationParameters>
</dsig:Transform>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>rgHU/BWcaOiwuP/Q72oybFcEQO8=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>R+RGFjzRYpGVPGINbzsFbXSQ7Slc04/mzQ+BX57oD7NhMKxCcO1C9cV2cJzWAeN5WuDlfsh3RZR/5sTsyEi3yO69ECcLUNDlbjey57GBr5W9PRRIWPs2fZVk2EH4+KOnXVghcAsrXPgm1Ai9UZQUXh0aPiOkQMDplnnhENTkKUo=</dsig:SignatureValue>
- <dsig:KeyInfo>
- <wsse:SecurityTokenReference xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Reference URI="#_FNfXFOVi1OcPKSyRUAHDyw22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" />
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
</dsig:Signature>
- <wsse:SecurityTokenReference wsu:Id="nwWnNm69TPcdyp0yT8fa7g22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.0#SAMLAssertionID" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">YFfqXnq2xlt426HB9uDInw22</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
- <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="YFfqXnq2xlt426HB9uDInw22" IssueInstant="2007-09-01T13:40:06Z" Issuer="https://phaos.com/idp" xmlns="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2007-09-01T13:40:06Z" NotOnOrAfter="2007-09-02T13:40:06Z" />
- <saml:AuthenticationStatement AuthenticationInstant="2007-09-01T13:40:06Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
- <saml:Subject>
<saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">oc4jadmin</saml:NameIdentifier>
- <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</wsse:Security>
</env:Header>
- <env:Body wsu:Id="mvDwzM5hZWAdG6n5tKLufA22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <ns0:getTime env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<format xsi:type="xsd:string" />
</ns0:getTime>
</env:Body>
</env:Envelope> -
Getting an error when outputing with Autocad
I have the latest Adobe viewer installed 10.1.1. Yet I get an error when trying to output to a PDF. It wasn't always this way.
error is; "No PDF viewer installed"
Please helpMac or Win? Can you open Reader? In any case, you cannot create PDFs with Reader, which is, well, very little more than a reader of PDF files.
-
Hi All,
We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
2. An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
Please help me from this error.
Thanks in Advance
RaviHi,
Check following thread and underlying note..
error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
Abhijeet
Reward pts if useful.. -
Error when posting with Safari 10.3.2
Hi all,
This is odd, I can't post in 10.3 Usage and the Leopard Usage forum and here using Safari 1.3.2 but using Camino I was able to get right in and post here (or at least I'll see when I hit the "Post Message" button. Safari let me in but would keep returning errors when trying to post a topic or reply.
Just thought I'd post here my situation as of right now. Anyone else having problems? Sorry, I lost the copy/paste of the error when I tried to post here with Safari.
littleshoulders
edit: Just now am editing this post with Safari again and it seems to be working again. Weird...I suppose just another small glitch while posting.
Message was edited by: littleshouldersproblem resolved itself. Thanks.
-
"Connector Specific Error" when synchronizing with BlackBerry Desktop Software
Hi
i have a connector specific error when I synchronise my contact.
that's my iloptcfg.cfg
[General]
ErrLogMaxSize=500000
ErrLogBackups=0
TraceDetail=0
TraceLog=0
UseNtEventLog=1
UseThreadIDLogFileNames=0
AttendeeDisplayNameOnly=0
[ilwin]
HeapLogging=0
MultiJobTraceLog=1
EngineTracing=799
ILXflags=0
TranslatorLogVerbosity=0
SingleSessionXlateLogs=0
ILTRflags=0
TifLog=0
LoggingFilter=0
ILLOGflags=0
DirectionForRecurringRemove=0
AutoCleanse=1
HistoryFileCompression=0
AllowTwoTierHistoryFiles=0
XlateLogBackups=0
HistoryFileBackups=1
[CAAR Options - Contact]
Add Empty KF Records=0
Perform Email Matching=0
and my PtTrace.log
Sat Jun 05 00:38:41 2010 -- Intellisync Log File --
Sat Jun 05 00:38:41 2010: Error Failed to retrieve field on the device.4238 at RIM:eviceIConnector.cpp line 1415
Sat Jun 05 00:38:41 2010: Error 4.4 at .\sdk_data.cpp line 3846
Sat Jun 05 00:38:41 2010: Error 4238.4087 at .\ciltrans.cpp line 1077
thank yo for your helpHi and welcome to the forums!
Here is an article on how to resolve the problem.
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Unknown Error When Saving with CS6
I am receiving an unknown error when trying to save my document. I have tried to take off the PDF convertable part, and tried saving it legacy style, but it's still not working. I have a doc open I need to save and won't be able to shut my computer down until I fix this... What could be the issue? Is there a fix for it?
Thank you!!!!!!
HenriAfter nearly ripping my eyeballs out and chucking my laptop out the window, I finally fixed the problem!
For some reason I didn't have a CMaps folder in my Adobe - Common Files - Font folder:
C:\Program Files\Common Files\Adobe\Fonts\Reqrd\CMaps
So I made the "CMaps" folder and copied and pasted the files "Identity-H" and "Identity-V" from an "Adobe Reader" CMap folder, and now I can save text in an *.ai file with PDF Compatibility checked.
It's pretty strange Illustrator was working for 2 years without this folder, and now all the sudden it needed it. Also, this is a very obscure fix.
Hopefully the programmers at Adobe have fixed these bugs in newer versions. -
Error when working with fillin or droplist fields as part ofgrid field
Hello,
A customer at Eli Lilly & Co. is experiencing an error when trying to
change the properties of a gridfield that contains droplists as part of an
array that is gridded. They get this error when trying to do any
modification of the grid field.
Have any of you experienced this? Any insight for resolution? We do have
a trouble ticket into Forte regarding this but wanted to see if anyone
else has experienced this. We get this bug in C1 and F2 versions:
System Error: Unable to allocate resources for object
‘dtlArray.status_ind’ of class ‘qqds_DropList’.
Class: qqsp_systemResourceException with ReasonCode: SP_ER_WINDOWLIMIT
error#[701,13]
detected at widget. ThrowResourceException at 1 Last tool statement:
method cw.load
error time: thu feb 20 8:47:23.
Exception occured (locally) on partition ‘Forte_cl0_client’,(partition
Id=BD14F94489D1-11D0-9BEE-06814DBAA77:ox124:0x1,taskid=[BD14F94489D1-11D0-
9BEE-062814DBAA77-ox1243654 on node p8888 in environment DevEnv_2F2.
Thanks,
Peggy Adrian
[email protected]Hi Jason,
If you have problems with the network this has to be solved.
I don't think we can have a software working if a cable was unplug ).
We advice our customer to use citrix servers in case if the latency into network is high (more than 200 ms) and of course in case of loosing packages.
But I don't think the problem in your case is related to the network.
It seems in your case it was a problem of send governor.
This can have problem when the cube and dimension are not syncronize or you have an error in one of dimensions.
Also can you check the table sgqueue if you have any record there when nobody is sending data?
If you have records there then you have to delete these records.
Check also tbl"your application"lock if you have records.
Regards
Sorin Radulescu
Maybe you are looking for
-
How to configure Mail for business contacts?
How can I configure Iphone 4S Mail to include default spaces to enter business phone, business fax number, and business address?
-
Dual-routing messages in gateway/ext-domain
Here's another question related to our impending rollout of Groupwise to our stores... Currently, our stores' POS systems receive text messages via the mainframe. To allow corporate users with Groupwise to send mail to the stores, we set up many year
-
Deleting modified/original images
I had a question earlier for how to delete original pictures after I had rotated them, but today I found out that pictures that I had deleted from the library (cause I didn't want them) still are in the iPhoto folder! My camera automatically rotates
-
Problem with Archive and Install - Second disc won't complete
I'm trying to run an archive and install for my iMac, OS 10.4.11. I get through the first disc fine, but after I put in the 2nd install disc, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs
-
Question about small symbol in "inbox"
To the right of the word "Inbox" in the gray rectangle is a small white circle with a curved gray line in it. I tired clicking on it and the background becomes dark gray and the curved line becomes white. It was never there before. What the heck is i