Acrobat X automatically deselects Quick Tools after each use

After selecting & using a Quick Tool like line/arrow/etc, the selection is automatically dropped. It must then be clicked on again to re-use the same tool. Any ideas what might cause this. Granted, it's an annoyance, but having to click the same tool over and over again after use gets old fast.
Thanks!

I don't know if Acrobat is the same way or not. but most programs that deal with Graphics when you single-click on a Tool it selects for the duration of that particular use. And if you want it to be remain selected you double-click in fast succession. click on it again just once, deselects it.

Similar Messages

  • Wipe ipad after each use (like invited account)

    How wipe ipad data after each use (like invited account on MacOs)?

    Sorry, but assuming you mean that you want it to wipe automatically, that's not a feature of iOS (except the data wipe that can happen as a security feature after multiple incorrect passcode attempts). If you want to wipe an iPad, you have to do it manually.
    Regards.

  • Do I need to power off my iPad after each use?

    I bought a new iPad. The problem is after each use I have to power off in Order to connect to internet. Is there something in settings I need to do in Order not to have to shut my iPAd off so often

    That shouldn't happen. I almost never turn my iPad off unless I do so for troubleshooting purposes. There is nothing in the settings that you should have to "fix" either as long as WiFi is always turned on.
    Try resetting your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Reset of automatic scheculed Forecast Backround after each Run

    Hi Experts
    We have scenario where forecasting jobs are scheduled for Monthly Run through (MC8G) .Theses jobs are not reseting itsself for next month Run ,Untill Job is reset from status B to Null via MC8E.
    Kindly guide me why manual intervention is requiring each time.
    Thanks in advance
    Regards
    Upinder

    Hi Mario
    Thanks for your update ,we have also checked SDN thread dated 9th Aug 2011 and got below link :
    http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
    Which states that :When a job has been scheduled and run, the job gets a status. This status needs to be reset before the job can run again
    Pls reaffirm our understanding that job status needs manual resetting after each auto run of  Creating production plan and mass transfer to demand management (Background job).
    Thanks in advance
    Upinder

  • License agreement prompts after each use

    I have iTunes 6.0.1 that I installed a while ago. Everytime I open it I have to agree to the license agreement. Everything works fine there after but I am getting tired of this. I have done a search on this but I only see results for windows users. Can anyone help?

    Ok, I repaired the permissions and restarted the computer and that didn't work. Then I moved the preference files to the desktop and restarted and that didn't work. However I could not open the ByHost folder to move those preference files to the desktop. It says I don't have sufficient privileges. Do you know anyway around that?

  • PhotosmartD110 need to reconnect wireless after each use

    I have a MacBook Air. My printer used to work fine on my Toshiba PC at my old home. It took some time to get the printer working, and now it seems to need to reconnect to wireless each time I use it. Thanks.

    We have restarted the router numerous times. We do not have this problem when printing from our PC.
    Router: Netgear Super Hub 2ac (provided by Virgin Media in UK)
    OS: OS X 10.9.3
    Hope that helps get advice

  • Recharge iPod nano 3G after each use, or wait until flat before recharging?

    In order to optimise both the capacity of an iPod nano 3G battery (how long it lasts between charges) and its longevity (how long it will last before it has to be replaced) should the battery be charged up to full after every significant period of use (typically 2 hours playback in my case) or should charging not happen until the battery is flat or almost flat?
    Also, does anyone have any thoughts on my other iPod nano 3G question, which is at:
    http://discussions.apple.com/thread.jspa?threadID=1589301
    Many thanks.

    Charging your iPod battery
    http://docs.info.apple.com/article.html?artnum=61127
    iPod: About the battery charge status icon
    http://docs.info.apple.com/article.html?artnum=60970
    Li-Ion Batteries
    http://www.apple.com/batteries/
    Tips and tricks to get the most out of your iPod's battery
    http://docs.info.apple.com/article.html?artnum=61434
    Cheers,
    Patrick

  • Preferences and quick tools not saved

    How can I get Acrobat X Pro to save the preferences and quick tools after being closed?  The quick tools that I've added remain in the registry file.  It's almost like there is some other registry file that the software is using.

    Hi ghostperson,
    You should visit this link : http://www.adobe.com/devnet-docs/acrobatetk/
    This will answer your every question. let me know the result.

  • Text input - how set an automated space after each word?

    When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks

    lovetennis7 wrote:
    When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks
    I have confirmed that this feature was not included with the basic software package of the Incredible 2. 

  • Waveform Graphs: Is there a way to save data to a file and then clear the graph after each run?

    This is just an added feature that I would like to insert because I end up having to erase the previous graph(for viewing and simplification purposes) after almost every plot cycle. Does LabVIEW 7.0 have a built-in feature that allows the user to automatically clear the graph after each run.
    Thank you,
    Keith Blackwell

    May I recall you that to clear a graph you have to create a property node,
    choose value and connect an 1D array with its first value to zero.
    Then using a Select vi enables you to choose from clear or graph value.
    Gérard
    Gérard Férini
    Switzerland
    http://home.tiscalinet.ch/gferini/
    remove -move to reply personally
    "Greg McKaskle" wrote in message
    news:xEmJc.43762$[email protected]..
    > > I went into the function pallette-->signal manipulation-->align and
    > > resample
    > >
    > > and found something that may be useful, but I'm not sure how to use
    > > it. I guess I have to play around with it by trial and error. Was this
    > > the VI seetting that you were referring t
    o?
    > >
    >
    > The option I was talking about is for the entire VI. It resets the
    > value of all indicators prior to running. The setting is located in the
    > VI Properties dialog on the execution page I believe. In the end, there
    > are multiple ways to get this to work, and if you want just a few
    > indicators to be reset, you want to use locals or control methods, but
    > th eVI Properties is a convenient way to get all indicators cleared at
    once.
    >
    > Greg McKaskle
    >

  • Brush tool after filler

    hya guys been using ps cs5 for the first time and I can not use the brush tool after already using the filler tool, it just seems to ignore me. please help

    Ah ha.. You must be using a Smart Object, which is not directly editable. create a new layer above the S.O. and use the brush tool on it.
    As for a screen shot with Windows 7 - Press PrtScn/Print Screen. Got to Photoshop, create a new document by pressing Ctrl+N and press Ctrl+V to paste. Now save and upload to the forum by clicking the camera button and selecting the saved file.
    Benjamin

  • Why is it when I choose "block cookies always"  I still get lots of cookies showing in my preferences even though I clear them after every use

    Why is it when I choose "block cookies always"  I still get lots of cookies showing up when I look at my preferences.  I always clear my cookies after each use but I don't understand how I can get any at all if they are supposed to block cookies always?  I have a desk top Mac and am using safari. 

    Safari caches cookies in memory and will sometimes write them back to disk after they've been deleted, for reasons known only to the developers. After deleting cookies, quit Safari immediately, then relaunch it. The cookies should now be gone for good, or until you visit the same sites again.

  • Customizing Quick Tools  in Acrobat X let it crash

    Hello,
    ich freshly installed the Creative Suite Design Premium 5.5 and now test the Programs.
    When I customize the quick tools  in Acrobat X (e.g. adding an item), Acrobat crashes, when I click the OK Button of the customization window (this open a second time after the first OK-click, when clicking OK again, Acrobat X crashes.).
    I use:
    Mac OS X 10.6.7
    Creative Suite Design Premium 5.5
    Also installed and heavily used before is Creative Suite Design Premium 4
    Important hint: I did a test as another user, in my case as root, in whose account I normally never work with the Creativ Suite(s). When logging in as root and starting Acrobat X, the customizing does NOT fail. So I think, the error has to do with some corrupt preference file or similar from prior CS4 use, but I couldn't find the culprit.
    What reason could my problem have?
    Regards, Joachim

    I have to update this for the sake of completeness and to avoid misleading people.
    I thought that the above had sorted it out: however, the problem came back and was then completely intractable - I could no longer do anything with it at all.
    In the end after trying quite a few other solutions I backed up, removed and recreated my user account. This fixed this problem, and a couple of other software issues besides. It was not without pain, and I would advocate great care and/or expert help in doing this, but it is nice to have my programs working properly again.
    Best wishes to all
    V

  • How to Deselect Tool after use ?

    Newbie Question - Adobe Acrobat 8.1
    How do I "deselect" or turn off a tool after I have finished using it, and get the document back to original state as when first opened.
    Example
    When I select :
    Tools-> Advanced Editing-> Link Tool
    a checkmark appears next to the link tool, and I can review and edit, or create links.
    Once done, How do I turn this off,?? to then see how the newly created or edited link works....without having to close the entire pdf document and then reopen it.
    Thanks for any advice...I have done much searching looking for an answer to this with no success..

    Click the hand tool.
    Aandi Inston

  • Photoshop Elements Photo Bin No longer stays open while working on photos but closes after each tool selection.

    In Elements 13.1 on a Mac running Yosemite 10.10.2, the "Photo Bin" no longer stays active below the photo work area but closes after each tool action.  The Bin used to stay open with all photos visible throughout, which was very helpful.  Couldn't find a preferences option for this.  Any help?

    Hi,
    It is possible to stop the Tools options automatically opening if that is what you want. You can not have the tools options and the photo bin both open at the same time.
    To stop the tools options always opening, go to the options menu and uncheck the auto show tools options.
    Brian

Maybe you are looking for

  • BAPI_ALM_ORDER_MAINTAIN- adding work duration operation

    <<u r g e n t is NOT permitted.>> Hello, I'm trying to add work duration operation via BAPI_ALM_ORDER_MAINTAIN. i want to update the "Actual Work" field but the data is put in the "Remaining Work" field. in addition fields "Activity Type for Confirma

  • Making a script that generates an output file dynamic

    I've created the following script to run it from within SQL*Plus on my PC to generate a report regarding specific details about all my databases in one file. The idea is to get 1 result of all my databases. Spool C:\output.txt; -- start DB1 CONNECT s

  • SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

    Does MAP tool capture User Summary  (count of users, their details) for SQL Server 2008?  At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008.. Does the User Summary only works for SQL Server 2008 Enterprise ed

  • Column A shows up on everypage of a large spreadsheet

    The first column of my spreadsheet is gray and shows up on every page of a large spreadsheet. If I delete it from any page, it gets deleted from all. Any help would be appreciated.

  • PO Info Record scales

    Hi sapians, We have created scale based info records for   material  A  and vendor B such as: quantity          price 0-100               10 per unit 100-200             9 per unit and open a PO for vendor B like : item 1 : material A   quantity 50 i