Acrobat X failed to install on my windows 7 64bit computer

Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\AMD64\ADREGP.dll.   Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\AMD64\ADREGP.dll.   Verify that you have access to that directory.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050:  - Acrobat Professional: Install failed

Error 1310 indicates that your permissions for C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\AMD64 have become compromised and the installer is not able to write to that location.  You can find more details on how to correct this error at Error "1310: Error writing to file: C:Config.Msi..." | CS4 products - http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html.

Similar Messages

  • Show that Adobe Acrobat Pro XI is installed on my Windows 8 computer, but I can't find the app list

    I am using windows 8 and the Adobe Cloud shows that Adobe Acrobat Pro XI is installed and updated, but I can't find the app, and, when looking at my list of programs to "uninstall", I don't see it listed either. (I thought a possible solution might be to uninstall and install again)
    Any help would be appreciated. Thanks!

    HI Marshapearson,
    Please try removing Acrobat from the link mentioned below.
    Link : http://labs.adobe.com/downloads/acrobatcleaner.html.
    Once you have removed the product, please launch the Creative CLoud APP once again and install ACrobat on the machine .
    Let us know if you face any further issue or if it worked fine for you .
    Thanks & Regards,
    kartikay Sharma

  • My hp deskjet f4180 device driver failed to install to my windows 7 computer even with the updates.

    really need help asap i would greatly appreciate it.

    Have you downloaded the Windows 7 drivers from HP here?  If this is the driver you are using please give some additional details of the error messages you are seeing.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Bought a new iMac 27" yesterday.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

    I bought a new iMac 27" yesterday, running with Mavericks OS.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

    update manually,:  http://www.adobe.com/downloads/updates/

  • Lightroom and acrobat pro fail to install

    I used the CCPLauncher and deployed using an .msi photoshop, dreamweaver, indesign and a few others but lightroom and acrobat pro fail to install. I recreated the packages a few times but no joy, anybody else come across this?
    Thanks

    Did you run ExceptionDeployer.exe --workflow=install --mode=pre for Acrobat and ExceptionDeployer.exe --workflow=install --mode=post for everything else?

  • Itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • ITunes won't install on my windows 7 computer.

    iTunes won't install onto my windows 7 computer. Any suggestions?

    Hello, billymeck. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful in troubleshooting the iTunes installation issue you are experiencing.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    If iTunes has been previously installed, I would recommend completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, attempt a download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling, follow the steps in the article below. 
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • Problem installing itunes on windows 64bit

    problem installing itunes on windows 64bit, help me!!!

    Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

  • I have elements 7 installed on my windows 8 computer and it will not accept my serial number

    I have elements 7 installed on my windows 8 computer and it will not accept my serial number

    You can download the updates from here:
    windows
    Adobe - Photoshop Elements : For Windows
    mac
    Adobe - Photoshop Elements : For Macintosh
    There is no longer anything to sign in to.
    See this for more info and solutions:
    http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

    I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
    I have checked that I have extracted the following assemblies:
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
    Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
    I have run this same set of files on another server and Weblogic was installed. Am I missing something?

    I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Installer fails to install EM on Window XP non English

    Hello,
    I'm new to Oracle and try to install Oracle 10.1.0g on my Windows XP Professional Czech machine.
    Universal installer fails to install Enterprise manager. So I later manually invoke emca.bat -r. However this fails with error - Malformed Encoding.
    Could somebody please help me? Many thanks.
    Log:
    You have specified the following settings
    Database ORACLE_HOME ................ C:\usr\oracle\product\10.1.0\Db_1
    Enterprise Manager ORACLE_HOME ................ C:\usr\oracle\product\10.1.0\Db_
    1
    Database host name ................ Informatika-7.nempodlesi.cz
    Listener port number ................ 1521
    Database SID ................ orcl
    Service name ................ orcl
    Email address for notification ............... d@x
    Email gateway for notification ............... d
    Do you wish to continue? [yes/no]: yes
    Nov 29, 2004 10:04:32 AM oracle.sysman.emcp.EMConfig updateReposVars
    INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\sysman\emdrep\config\repos
    itory.variables ...
    Nov 29, 2004 10:04:32 AM oracle.sysman.emcp.util.PortQuery findUsedPorts
    INFO: Searching services file for used port
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig getProperties
    WARNING: Error reading file C:\usr\oracle\product\10.1.0\Db_1\sysman\config\emd.
    properties
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig addPortEntries
    INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\install\portlist.ini ...
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateEmdProps
    INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\sysman\config\emd.properti
    es ...
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateTargets
    SEVERE: Error saving targets list to C:\usr\oracle\product\10.1.0\Db_1\sysman\em
    d\targets.xml :: Malformed \uxxxx encoding.
    oracle.sysman.emSDK.conf.TargetAdditionException: Error saving targets list to C
    :\usr\oracle\product\10.1.0\Db_1\sysman\emd\targets.xml :: Malformed \uxxxx enco
    ding.
    at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller
    .java:1103)
    at oracle.sysman.emSDK.conf.TargetInstaller.addTarget(TargetInstaller.ja
    va:989)
    at oracle.sysman.emSDK.conf.TargetInstaller.addTarget(TargetInstaller.ja
    va:943)
    at oracle.sysman.emcp.EMConfig.updateTargets(EMConfig.java:2650)
    at oracle.sysman.emcp.EMConfig.updateConfigFiles(EMConfig.java:1355)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:407)
    at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.jav
    a:678)
    at oracle.sysman.emcp.EMConfigAssistant.performSetup(EMConfigAssistant.j
    ava:627)
    at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.jav
    a:332)
    at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:172)
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateConfigFiles
    SEVERE: Error updating targets.xml. Update could not be completed successfully
    Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error updating the necessary configuration files.
    Could not complete the configuration. Refer to the log file for details

    Hello,
    you are facing bug 3610052, on Windows platforms you must not install EM into a directory starting with 'u'. This is interpreted as unicode encode and throws 'Malformed encoding' error message.

  • 12.1 failed to install. Error7 (windows error 193). What is the cause?

    Installation began ok but failed to install correctly

    michaelcrty, I have the same problem with the same error codes. Installed, uninstalled, and reinstalled multiple times. Still the same error message every time.

Maybe you are looking for