Acrobat x pro crashes (error 6) under domain user account

Acrobat X Pro (installed under CS6 Suite) crashes when run under a domain users account (receives error 6, uninstall/reinstall product). I've done this many times with the same result. My feeling is that the problem is related to permissions/rights issues as the product works fine when logged into the local administrator account. Any thoughts/comments would be appreciated.

Similar Messages

Acrobat 8 Pro crashing on an OD/AD user account?

I'm doing some testing on a client mac (24", 2.16, 10.4.9). The user account is Active Directory who authenticates via Open Directory on a Mac OS X Server (10.4.9). The user account is set up as an Administrator
We recently installed Adobe Acrobat 8 Professional, but it crashes constantly, within about a minute of launching. We tested it on Local user accounts and encountered no errors whatsoever. The end user called Adobe support and was told to call Apple. Clearly there is some issue here because the account authenticates against a server.
Any ideas? Web search didn't yield any solid answers. The only suggestion I've found so far was to do a permission fix, which I did, but that didn't have any effect and problem continues.
Thanks

is the home directory a local or on the server?

Acrobat x pro crash after installation and running it, exit code 16,

Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.

Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum]

Adobe Acrobat 9 Pro Reinstallation Errors

My hard drive crashed on my computer (replaced with new one) and I had to reinstall my Adobe CS5 and Adobe Acrobat 9 Pro. All of CS5 reinstalled fine. However, everytime I reinstall Adobe Acrobat 9 Pro, it errors every time. It will install, but whenever you open the program, it immediately stops working and errors out saying Adobe Acrobat 9.3 stopped working. Windows cannot find a solution and then closes.
It never gives me the chance to enter my product key or register the product. I went to the Adobe Product page and tried downloading and installing all the updates, but nothing works. No matter what I do it closes right away. Any ideas?
My PC is on Windows 7 - I had to initially install Acrobat on this PC when I got it a year or so ago and it worked fine. Not sure what's changed.
Thanks.

I just tried reinstalling it - again, it wasnt giving me the option to register it or anything. Would close the minute I opened Acrobat.
So I opened the Acrobat Distiller that installed with Acrobat and that asked me to accept the agreement and register the product. Once I did that - Acrobat started working again!

Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already

Hello,
Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already and I do not have the software, so paid for nothing.
I am using a Mac OS X.
Thanks for your help.
Ossama

[discussion moved to Acrobat Installation & Update Issues forum]

Acrobat XI Pro crashes when saving as a reduced size PDF in version 11.0.07

Since upgrading to the v 11.0.7 update, Acrobat XI Pro crashes every time I try to "save as" a reduced size PDF. I have tried several different settings, but still crashes.

You might try to setup the page size in the Adobe PDF printer and then print to the printer. I assume you are using PDF Maker (create PDF) and that may be the problem. You might also open the preferences in PDF Maker and turn off most of the options - none should be needed for a single page since you would likely not be using transitions, bookmarks, etc.
Just as a test, you may want to just start with printing ot the Adobe PDF printer, but you will likely get the default paper size with the PPT shrunk to fit.

Adobe Acrobat 9 Pro runtime Error!

I have an issues with Adobe Acrobat 9 Pro runtime Error!
Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error.....etc
on window xp 32bit with Service Pack3!
Could anyone please help.

Was it running in the past? Also, Reader and Acrobat are different products and you mentioned them as though you think they are the same. If you can open the package, select Help>Repair. Follow up with Help>Updates.

My Acrobat 9 pro crashed on my PC using XP. I deleted it and tried to reinstall. It asked for my license for 9, 7 and 6. I put in the 9

My Acrobat 9 pro crashed on my PC using XP. I deleted it and tried to reinstall. It asked for my license for 9, 7 and 6. I put in the 9 & 7 license which I have. How do I get the version 6 license. Is there a live person at Adobe & how do I reach them??

You have the upgrade serial number for Acrobat 9that is why it is asking the previous qualifying serial number, I am sending you the serial number of Acrobat 6 & 7 by private messaging, you can your self find them by using Find your serial number quickly
Regards
Rajshree

Acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date

acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date.
Has anybody else seen this problem? Is there a fix?
I wanted to download the demo of acrobat XI but it says the previous version will be removed and deactivate the license. That sucks!

Yes it is up to date.
I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten.

Acrobat XI Pro crash on scan option

Acrobat XI Pro crash on scan option. Win7 os

I have just the forum for you
http://forums.adobe.com/community/acrobat/scanning_%26_ocr

Acrobat X Pro Crashes on Yosemite

I upgraded to OSX Yosemite and now my Acrobat X Pro crashes if I try to save or print. I am on 10.1.13 and a MacBook Air Mid-2012. Is there a bug fix pending? I cannot undo my OS upgrade, or I would.

Hi Kennith ,
Does it crashes when you try to print any of the PDF or happens with any specific PDF?
Are you trying to print with a conventional printer or the Adobe Printer ?
Refer to this link and see if it helps.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/internet-explorer-crashes-when-i -try-to-print-with/50203e4e-5a0f-4610-a9ba-577ba07c9953
Regards
Sukrit Dhingra

"Unable to check revocation" error while checking CDP from non-domain user account

Hi!
I use 3-tier PKI infrastructure:
Stand-alone offline Root CA: RootCA;
Stand-alone offline Intermediate subordinate CA: SubCA;
Enterprise CA: EntSubCA.
In certificate we have three CDP point for CRL check:
ldap:///, http:// and file://
I have Windows 2008 R2 server joined to domain.
I use command certutil –verify –urlfetch <filename.cer> >check.txt for revocation checking of certificate.
When I use domain user account for revocation checking, all OK.
I have access to any CDP and all fine.
But when i use local server user account, I haven't access to ldap:/// and process failed although all other links is OK.
My question is "why check fail with non-domain user accout while other CDP point succesfully verifed"?
Here is the logfile from local user:
Issuer:
CN=EntSubCA
DC=DED
DC=ROOT
Subject:
CN=servername.domain_name
Cert Serial Number: 5a896145000300006ee2
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
ChainContext.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
NotBefore: 05.02.2015 20:03
NotAfter: 05.02.2016 20:03
Subject: CN=servername.domain_name
Serial: 5a896145000300006ee2
SubjectAltName: DNS Name=servername.domain_name
Template: Machine
70 e4 6b 16 05 a1 62 e3 6d 24 96 ff 44 74 ee a2 3e ce df 18
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crt
---------------- Certificate CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
Verified "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Base CRL CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
OK "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
OK "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 018d:
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
33 af 4d be 0e 35 45 94 bc 8b 3f d9 c1 60 e7 0c c4 83 17 b6
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[1] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=SubCA
NotBefore: 13.11.2014 19:12
NotAfter: 13.11.2017 19:22
Subject: CN=EntSubCA, DC=DED, DC=ROOT
Serial: 6109015b000100000008
Template: SubCA
9b 04 17 9f c5 fe 52 ca a5 58 49 6c c6 18 fa db 13 b3 92 9e
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: The network path was not found. 0x80070035 (WIN32: 53)
file://\\sub_ca\CertEnroll\sub_ca_SubCA(1).crt
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\SubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/SubCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (32)" Time: 0
[0.0] file://\\ca\crl\SubCA.crl
Verified "Base CRL (32)" Time: 4
[1.0] http://webserver/crl/SubCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 32:
Issuer: CN=SubCA
8d a9 9d 51 65 a3 8e 77 02 22 40 57 62 70 e8 f6 c5 2e 60 1e
CertContext[0][2]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 28.05.2008 12:09
NotAfter: 28.05.2058 12:19
Subject: CN=SubCA
Serial: 616bd19f000100000004
Template: SubCA
06 d2 47 e7 dc 8f a7 97 a2 b8 c3 92 03 19 24 0c 47 45 22 14
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 4
[0.0] http://webserver/crl/RootCA.crl
Verified "Base CRL (1c)" Time: 0
[1.0] file://\\ca\crl\RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
CertContext[0][3]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 27.05.2008 16:10
NotAfter: 27.05.2110 16:20
Subject: CN=RootCA
Serial: 258de6fbd3bbab92460530e9e9f10536
5d e4 56 38 13 0a 52 aa 66 51 25 61 19 33 c9 d7 a2 c7 dd 38
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 0
[0.0] file://\\ca\crl\RootCA.crl
Verified "Base CRL (1c)" Time: 4
[1.0] http://webserver/crl/RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
Issuance[0] = 1.2.700.113556.1.4.7000.233.28688.7.167403.1102261.1593578.2302197.1
Exclude leaf cert:
5b 8d 96 39 f8 a3 6f af f3 89 bc 8d 78 e2 da 53 21 b8 ff aa
Full chain:
ca 99 30 47 9b ad ab ce 97 cc 70 80 a5 4e 11 b3 1a 83 98 78
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.5.5.7.3.1 Server Authentication
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.

What you have discovered is the reason to *not* use LDAP URLs for CDP and AIA extensions in your PKI. To access those URLs, the account must access to the URLs. In your output, it is quite clear that the local account does not have necessary permissions
(you also use FILE URLs for publication, which again is not recommended).
The best practice is to use a single URL for the CDP extension. It should be an HTTP URL that is hosted on a highly available (internally and externally accessible) Web cluster.
For the AIA extension, it should contain two URLs: one for the CA certificate - again to an internally and externally accessible, highly available Web cluster and one for the OCSP service - also
an internally and externally accessible, highly available Web cluster.
the other issue is that the root CA is *not* trusted when run by a non-domain account. How are you adding the trusted root CA. It is recommended to do this by running
certutil -dspublish -f RootCA.crt.
This will ensure that the computer account trusts the root CA. In your output, the root CA certificate is not trusted.
Brian

Error while submitting job under another user account

Hi,
Im logging with my userid (ie: prem). I have dba privilege. Im trying to submit a job under scott user account.
Im getting the below error.
prem@db1>BEGIN
2 DECLARE
3 wk_job NUMBER;
4 BEGIN
5 sys.DBMS_iJOB.SUBMIT(wk_job,LUSER=>'SCOTT', PUSER=>'SCOTT', CUSER=>'SCOTT','INSERT_JOB;',
6 TO_DATE(TO_CHAR(TRUNC(SYSDATE),'dd/mm/yyyy') || '23:55','dd/mm/yyyy hh24:mi'),'SYSDATE+1');
7 COMMIT;
8 END;
9 END;
10 /
sys.DBMS_iJOB.SUBMIT(wk_job,LUSER=>'SCOTT', PUSER=>'SCOTT', CUSER=>'SCOTT','INSERT_JOB;',
ERROR at line 5:
ORA-06550: line 5, column 3:
PLS-00306: wrong number or types of arguments in call to 'SUBMIT'
ORA-06550: line 5, column 3:
PL/SQL: Statement ignored
Please help me in this regard.
Thanks,
Prem

Hi,
As you may know, in versions 10gR1 and higher, Oracle recommends the use of dbms_scheduler instead of dbms_job.
You can easily create jobs in other user's schemas using dbms_scheduler, but this is not supported in dbms_job.
dbms_ijob is an Oracle internal package which should never be called directly (it is neither supported or recommended by Oracle and doing any updates may break this usage). What you should be doing is connecting as that user and then using dbms_job.submit (or better yet using dbms_scheduler.create_job).
The error message you are getting is because you are not calling the internal procedure correctly. This procedure is not officially documented by Oracle and your use of it will not be supported by Oracle.
Hope this helps,
Ravi.

[SOLVED]winbind ... Error looking up domain users

I have followed the Active Directory intergration Wiki to the letter, but stuck at the winbind section when i do i wbinfo -u or i get Error looking up Domain users or domain groups....
[gigabyteme@wkstn1-arch ~]$ sudo wbinfo -u
[sudo] password for gigabyteme:
Error looking up domain users
[gigabyteme@wkstn1-arch ~]$ wbinfo -u
Error looking up domain users
[gigabyteme@wkstn1-arch ~]$ wbinfo -g
failed to call wbcListGroups: WBC_ERR_WINBIND_NOT_AVAILABLE
Error looking up domain groups
[gigabyteme@wkstn1-arch ~]$
Here is my krb.conf file....
[libdefaults]
default_realm = CLICK-IT.CA
clockskew = 300
ticket_lifetime = 1d
forwardable = true
proxiable = true
dns_lookup_realm = true
dns_lookup_kdc = true
[realms]
CLICK-IT.CA = {
kdc = CITADSVR01.CLICK-IT.CA
admin_server = CITADSVR01.CLICK-IT.CA
default_domain = CLICK-IT.CA
[domain_realm]
.citadsvr01.click-it.ca = CLICK-IT.CA
.click-it.ca = CLICK-IT.CA
click-it.ca = CLICK-IT.CA
click-it = CLICK-IT.CA
[appdefaults]
pam = {
ticket_lifetime = 1d
renew_lifetime = 1d
forwardable = true
proxiable = false
retain_after_close = false
minimum_uid = 0
debug = false
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/kdc.log
admin_server = FILE:/var/log/kadmind.log
and here is my smb.conf file
/etc/samba/smb.conf
[Global]
netbios name = WKSTN1-ARCH
workgroup = CLICK-IT
realm = CLICK-IT.CA
server string = %h ArchLinux Host
security = ads
encrypt passwords = yes
password server = citadsvr01.click-it.ca
idmap config * : backend = rid
idmap config * : range = 10000-20000
winbind use default domain = no
winbind enum users = Yes
winbind enum groups = Yes
winbind nested groups = Yes
winbind separator = +
winbind refresh tickets = yes
template shell = /bin/bash
template homedir = /home/%D/%U
preferred master = no
dns proxy = no
wins server = pdc.example.com
wins proxy = no
inherit acls = Yes
map acl inherit = Yes
acl group control = yes
load printers = no
debug level = 3
use sendfile = no
Any help with this would be greatly aprecieated...
Last edited by 0n3 (2014-03-28 05:27:43)

0n3 wrote:Please mark as solved, for some reason the winbindd service wasnt being started, i enabled and started it manually and it works now
You need to do that yourself.
https://wiki.archlinux.org/index.php/Fo … ow_to_Post

Logitech HD Pro Webcam C920 Won't Work Under One User Account in Windows Vista 32-bit

My Logitech HD Webcam C920 seems to work fine online on Flash Player under all user accounts except one. How do I fix this without having to delete that user account?

Thing is (and this is just basic troubleshooting principles):
If it works (under any account at all), - it ISN'T the camera, or it wouldn't work at all. Likewise, if it DIDN'T work under any account, it COULD be the camera.
If it works (under any account at all), - it ISN'T flash player, or it wouldn't work at all. Likewise, if it DIDN'T work under any account, it COULD be Flash Player.
So the problem HAS to be specific to this one account, and some setting(s) for the account, since the plug-in and hardware have already been proven to be working.
Unless you can pinpoint what setting for this one accoiunt is preventing it from working, you'll most likely have to create a new account to use it.

Acrobat x pro crashes (error 6) under domain user account

Similar Messages

Maybe you are looking for