Acrobat X Pro Only Prints First Page

I have several multipage PDFs that I am trying to print to my HP LaserJet 5si MX. I am on OS X 10.6.5 with all the latest updates applied. When printing, only the first page prints and then the printer queue clears as though the whole document printed.
The PDFs print fine in their entirety from Preview. I tried Reader 7.0.7 which also works fine.
Reader X has the same problem as Pro.
I checked for update printer drivers, but they are included with OS X and HP has no updates.
Thanks for any help!

I have had the same experience. My HP 4050 reported "Insufficient memory" after printing the first page. The PDF was created with Acrobat Pro X by combining PDFs sent as attachments. The file is 238 KB, and is printed without difficulty using Acrobat Pro 9.
Bpb Stoothoff

Similar Messages

HP 4315 printer only prints first page.

HP4315 prianger only prints first page. Canot print any more pages.

Hi there,
If you are running windows; Try downloading and running the print and scan doctor located here:
http://goo.gl/Ujpib
It can fix a lot on its own and if not give a better idea of what is going on. If not windows post back with your OS.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Why can I only print first page

Why can I only print first page of an email wirelessly with my brother printer

Sophie Hubble which Adobe software or service is your inquiry in reference too?

Acrobat Pro 8 will only print first page of pdf at 11x17

Hello all. When I try print 11x17 from Acrobat Pro 8 only the first page prints. I have tried several printers and all do the same. I have tried entering page numbers rather than leaving it on print all. I have tried printing 11x17 from other applications and it works fine. And I am able to print 8.5x11 from Acrobat just fine. I've tried searching all sorts of forums and I cannot seem to find any information on this particular problem. Suggestions anyone? I need to get this resolved...it is highly annoying since we print many 11x17 documents on a daily basis.

Since Acrobat is not an Apple product, you would probably be better off posting your question on Adobe's own forums as they would be geared more toward the issue than an Apple forum:
http://www.adobeforums.com

Adobe acrobat only prints first page with airport express

I got my printer (HP PSC1315) to work with airport express using one of the solutions described in these forums. Printing is fine except when trying to print pdf files with adobe acrobat, in which case only the first page of the document prints. Preview has no trouble printing pdfs. Anyone else experience this? Is there a solution?
Thanks,
Kevin
PS- my version of acrobat is acrobat pro 7.0.5

Figured it out.
Adobe Acrobat/Reader is apparently very picky about printer drivers.
I had to have the users delete their mapped network printers from their Printers & Faxes window.
Then I opened the registry and went to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
I deleted the drivers for the printer(s) the customer had mapped (e.g. Xerox 6360DN, .. etc.)
I rebooted the computer
I had the customer logon and remap their printer.
That resolved the issue.

Adobe only prints first page of multi-page PDF documents.

On a military network, ever since users have been upgraded to Adobe Pro 9, only the first page of their multi-page documents will print from a particular network printer.
The OS is Windows XP.
Adobe Pro version is 9.1.2
Network printer is a Xerox Phaser 3500PS.
Can print other non-PDF documents to the same printer with no problems.
Can print the same PDF documents to other printers in the area and all pages go through.
No error messages on printer and no error message prints out.
I have had the users change their Font and Resource Policy to "Send for each page"
I have reloaded the Xerox Phaser 3500PS drivers.
I have had the users remove and remap the network printer.
I have had them try to print just two pages
I am unable to implement Adobe's Postscript Printer Driver as this is a military network and I cannot install unapproved software on the network printer server.
Any constructive suggestions would be appreciated.

Figured it out.
Adobe Acrobat/Reader is apparently very picky about printer drivers.
I had to have the users delete their mapped network printers from their Printers & Faxes window.
Then I opened the registry and went to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
I deleted the drivers for the printer(s) the customer had mapped (e.g. Xerox 6360DN, .. etc.)
I rebooted the computer
I had the customer logon and remap their printer.
That resolved the issue.

P1102W only prints first page or two of a job

A week or so ago, my P1102W stopped printing the complete job. Only the first page, sometimes two, would appear. The green light would be left flashing quickly rather than the slow pulse (3 seconds) when a job has completed. Pressing the red X button would often cause another page to appear but this would only work once or twice, after which the rest of the job was lost.

Hi , Welcome to the HP Forums! I see that your HP Laserjet Pro P1102w is only printing the first page or two of a job, on Windows 7. I am happy to help! Please try the steps within this guide, Print Jobs Stuck in Print Queue (Windows), and let me know what happens! (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this works! “Please click the Thumbs up icon below to thank me for responding.”

Only Prints First Page

For some reason when I try to print multiple photos from IPhoto only the first page is sent to the printer. Forinstance, if I want to print a contact sheet of the 20 photos I just shot, this is what I'd do:
Select and highlight the 20 photos in the Library, file > print, select "Contact Sheet" and select 10 photos per page from the drop down menus in the printer dialog box, and then select "Print".
Then is where the problem begins: The computer only spools one page and sends it to the printer. It will not print the balance of the sheets.
I'm using a Canon Pixma IP 5000 and an Epson 900, both are having the same difficulty so I suspect the problem is in the computer somewhere.

Ebo!:
As a workaround try selecting the option to select the pages to print and put in form 1 to xx. See if that will jump start the spooling of all pages.
As a fix: first delete the iPhoto preference file, com.apple.iPhoto, that resides in your User/Library/Preferences folder. Then try again. Next run either OnyX or Tiger Cache Cleaner to clean out the caches.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Printing to printer on windows xp computer, only prints first page

hey all,
I need some help. i just switched to a mac and I am loving it, but in my small office, I am having trouble printing. Two printers are connected to a Windows XP computer. I can connect to them via the network and print, but it only prints the first page...Any ideas on how to fix this problem?

Hello Cate_B and welcome to Apple Discussions.
The CIFS host error message is often a result of the Mac not being able to resolve the Windows computer name. This would be confirmed by the fact that when you selected Add Printer > Windows, your mums computer did not appear after selecting the workgroup. A solution could be to check what workgroup name is set in her Windows and ensure your Mac is set to the same workgroup name (set via the WINS section of the Advanced network settings.
For an easier fix you could try the SAMBA method again, but this time I suggest you try the following syntax.
smb://IP Address of Mums Computer/Sharename
Some other things to check...
1. Make sure the printer is shared by mums computer and ensure a guest can access it.
2. Ensure the share name is short (about 8 characters) and contains no spaces.
3. Check that your Epson driver will work when shared by a PC. Some Mac printer drivers will only work when connected directly to the Mac via USB (this is the case with a number of Canon drivers). In this case, you need to use an alternate driver based on CUPS, such as the Gutenprint driver set. These will work across a network and a cross-platform share.
Hope this helps you...
Pahu

My C4180 will only print first page of multi page document.

Hi, My C4180 printer will only print the first page of a multi page document - any ideas as to why?

Hello @highsal51 ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
So that I can get you the answer you are looking for, please answer the following questions.
1. What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
2. How is your printer connected to your computer?
3. What software are you using to print?
4. Do you experience this through printing with all programs?
Look forward to hearing back from you. Have a great day!
I worked for HP.

Report only printing first page.

Please Help.
After editing a report to fit onto a regular 8 1/2 * 11 inch page, the first page is all that is printing. I have tried many things yet nothing seems to work. The old report printed to a large bar type page on an old dot-matrix printer. I have set the new report to run to a smaller page on a laser printer. All fields/frames print perfect, except for not printing next page. Please help if you can.
Thank you
Rachel

Hi Chris,
Which ALV technique will you use to print out?? (LIST, GRID or something else...).
Please give us more information.
Thanks,

Multi-page reports only print first page

Post Author: reedpaulr
CA Forum: General
Hello...I'm using Crystal Reports version that comes with Visual Studio 2003 (I think its Crystal 9).
I have a report that has totals at the end. All is fine if the report is less than a page. If the report is more than a page...then the report only produces a page and I don't get anything else (i.e., missing detail and of course the totals).
Kind regards,
Paul

Post Author: reedpaulr
CA Forum: General
I figured out my own problem after comparing to some reports that worked the way I wanted. My "SeparatePages" parm was set to True...changed to False and all is good.
Thanks

Acrobat Reader 11 only prints the first page of a multipage document.

When printing a commercially created document with printing permissions enabled, only the first page prints when printing all or a selected range of pages on HP LaserJet 4000 and 8000 printers. Access is denied is displayed on ocassion.

They gotta fix this. It's been a huge problem for me for more than a year. I''ll defect to Chrome soon if they dont address this bug soon. Printing has been atrocious, even pathetic, i hate to say it. I can only print one page, maybe two if i am lucky. Sometimes, if it prints more than one page, the first page is mostly blank and the formatting of the text and sidebars is completely overlapped and sometimes unreadable. Basically, printing in Firefox is useless - it's a joke. I have to take the URL from Firefox and paste it into Chrome to get a decent print job. Why isnt this bug a higher priority?
Tags: Firefox cannot print, Firefox printing bug, Firefox only prints one page

Acrobat 8.1.4 only prints 1 page when I select "all"

Hi all,
I'm hoping you can help me. Just spent 27 minutes on hold with Adobe tech support and gave up.
I have an iMac running OS 10.5.8 and had successfully used other versions of Acrobat. I bought a ScanSnap printer and it was bundled with Adobe Acrobat Pro 8.1.4. Installation seemed to go fine, but now when I try to print a multi-page document, it only prints one page, even when I check "all" on the print menu.
Also, when I try to click on print prevue, it says "Prevue is not supported." That's new, too.
So far I'm not thinking this is such a great bargain, even for free! Can you help?
Thanks,
Kathy

Print preview is not supported any longer. I think it is due to the fact that both use pdf technology and there may be a conflict.
As to why it only prints one page rather than all, that is a hard one. You could try deleting the printer driver and re-installing the driver to see if that helps.

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

Acrobat X Pro Only Prints First Page

Similar Messages

Maybe you are looking for