Acrobat x pro - problem with installation

I could install all the Cs 5.5 package, except the Acrobat x Pro.
I have this message::
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1040-7D70-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1040-7D70-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: error.
ERROR: Install MSI payload failed with error: 1603 - Erro fatal durante a instalação.
MSI Error message: error.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
What can i do?
Thanks.

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Similar Messages

Adobe acrobat X Pro problem with installation

Hi,
I bought a creative Suite 5.5 design standard, evrything installed perfectly but not the Adobe Acrobat X Pro! Before I even install it, it's telling me that the minimum system requirements are not met. Same thing after I install it. What do you think is the problem? I have a 32 bit computer with windows Vista.
Thanks

Good day,
Have you installed SP2 for Vista? If not, try installing the service pack, then relaunching Acrobat X.
Regards,
David
Acrobat Community Manager
Adobe Systems

Adobe Acrobat X Pro problem with 10.1.1 MSP

I have an AIP for Adobe Acrobat X Pro and applied the 10.1.1 MSP to it yesterday.
When I attempt to deploy through Group Policy, I receive:
Error 1334: The file 'acidviewobj.tx' cannot be installed because the file cannot be found in cabinet file Data1.cab
I expanded Data1.cab and the file is definitely not there.
I have built this package using the following:
Downloaded AcrobatPro_10_Web_WWEFD.exe (10.0.0)
Ran -nos_o -nos_ne commands to extract
Created MST using Customization Wizard X
Applied 10.1.1 MSP patch
Am I doing something wrong?

OK, figured it out.
My problem was that I was reusing AIPs, which Adobe discourages in their Enterprise Admin Guide.
For every quarterly update, you have to recreate the AIP, then apply the new quarterly patch. I don't feel this is adequately explained in the guide, but it's the only series of steps that worked for me.
So:
Create a new 10.0.0 AIP
msiexec /a C:\Acrobat\AcroPro.msi (where AcroPro.msi is an unmodified, original 10.0.0 package. Re-extract from the 10.0.0 installer if you only have patched versions left)
choose a unique subfolder for this AIP, something like C:\Acrobat\AIP_1011\
Patch this new AIP with your quarterly patch
msiexec /a C:\Acrobat\AIP_1011\AcroPro.msi /p AcrobatUpd1011.msp
Now you can push out installs with this new, patched AcroPro.msi in your new AIP folder
msiexec /i C:\Acrobat\AIP_1011\AcroPro.msi TRANSFORMS=C:\Acrobat\transform.mst REINSTALLMODE=vomus REINSTALL=all REBOOT=reallysuppress /qb
For more details, see: http://secunia.com/community/forum/thread/show/9808/update_10_10_will_not_install

Acrobat 11 Pro - problem with right-click "Convert to Adobe PDF" output folder

I'm migrating from one machine running Windows XP Pro with Acrobat 8 Pro to Windows 7 Pro with Acrobat 11 Pro.
On the XP machine, when I right-click on a document and select "convert to Adobe PDF" the process works just fine - it always outputs the file to the target destination I have set in the Adobe PDF printer definition.
On the Windows 7 Pro/Acrobat 11 Pro machine, the exact same settings are ignored: the PDF will always end up in the same folder as the source file.
Both the source folder and the destination folder are on one of my office's networked drives.
Under the Printing Preferences, I have the output folder address set the same on both machines, so it *should* go to the right location on the new machine.
Oddly enough, on the Acrobat 11 Pro machine, if I select Adobe PDF as the default printer and do a test print, it *does* print to the correct folder!
This has got me stumped!
Thoughts?
(update from later in the day)
If Adobe PDF is selected as the default printer, I *can* select a bunch of documents, right-click, select "print", and Word will open up, and they'll print to the correct target folder.
So, it's "just" the right-click "Convert to Adobe PDF" that doesn't work correctly.

The reinstall is typically the last ditch effort to do. The first step is Help>Repair and Help>Updates. As far as Office 2013, the PDF Maker of AA X is not compatible and you can only print. In your list of errors it showed a problem with AcroTray.exe. As a first step, go to the print and select print-to-file. The file will be a PS file (maybe with a PRN extension). Once the printer if finished, open the file in Distiller to complete the process. If that is successful, then the problem is with AcroTray. Check your running tasks to be sure AcroTray is indeed running. If not, that is likely the problem. If it is, then restart it (it is located in the Acrobat folder). AcroTray provides the interface between the PS creation and Distiller to automate the process of creating the PDF.

Acrobat 9 Pro: Problem with blacken

Hi all,
after blacken just a Name of a Person in a pdf with Acrobat 9 Pro i get black lines with same pattern on each page looks like sample attached.
Just images are ok - Text is blacken.
Any Idea what i can do?
Regards
Rabe

Thank you for the answer but
the image shows the result of the redaction tool.
After marking one Word and use "apply redaction" the whole document looks like the page shown in the sample image.
Regards
RaBe
Nachricht geändert durch RaBeHH

Hey, I had met a problem with installation. Can any one help me?

Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Thanks

Re: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

Acrobat x pro crash after installation and running it, exit code 16,

Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.

Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum]

RoboHelp 9/Acrobat X Pro Integration with Outlook 2010

Is anyone aware of any issues with RoboHelp 9 and/or Acrobat X Pro integrating with Outlook 2010? When I create a PDF for review using RoboHelp and then try to send it for shared review, I keep getting an error message when I try to add people to the To and CC lists in the Send for Shared Review dialog. Clicking either button brings up my Address Book from Outlook, and I can select people without any problems, but whenever I click OK, I get a Check Names dialog book that says:
Microsoft Outlook does not recognize"/O=Company Name", Select the address to use:
(No Suggestions)
At this point, all I can do is go back to the Address Book and try to add people again, but this leads to the same error.

In Outlook, go to File/Options/Add-Ins, and select Manage Com Add-ins, and click Go...
Then make sure the PDFMaker Office COM Addin is checked, select OK, restart, and it should be available.

Problems with Installer application

Hi!
Lately I've been having problems with Installer with several packages. Some pkgs install just fine, but others fail whenever they try to run some preflight or preinstall scripts.
My mac is new MacBook Pro Core 2 Duo shipped with 10.4.8. I think these problems might have started after some late Security Updates.
I've been doing maintenance tasks prediotically as well as repaired permissions and disk in single user mode. I've also tried to copy Installer from my Tiger install DVD's but with no luck.
Either system.log, console.log nor CrashReports don't show anything. Installer's own log just announces that install failed while running presomething-scripts. But when I run these scripts manually from Terminal, they work just fine without any errors.
I'm hopeless. I wish won't have to see the day coming when I'll have to do that so well known regular windows-like format and reinstall procedure with OS X. Sadly there's several packages I need to have installed, so if reinstall is the only solution please throw some backup and restore tips at me.
With kind regards,
Joona

The first package I noticed this problem with was DivX for Mac installer. The Installer's log pointed that installation failed while running the preflight script. The script is pretty long, but mainly just removes older version of DivX libraries and applications and when I run it from the shell, it works just fine.
I've also tried downloading it again along with another versions, but all the Installer fail at the same point. I've also tried to find some help to this problem from their forums, but it seems to me that I'm the only one having this problem.
Another package which I found failing is Missing Sync for Windows Mobile. I just ordered HTC TyTN -phone and tried to get Missing Sync working. Missing Sync itself installs correctly, but there's a application which comes bundled with MS called Mark/Space Notebook. The installer is multipackage installer and during the installation of M/S Notebook it fails while running preinstall script. The preinstall script is really simple, like this:
#!/bin/bash
rm -rf "/Applications/Mark:Space Notebook.app"
I haven't yet tried these packages on other Macs, but I'm positive they will work just fine. I believe that the problem must be either the Installer app, or something in my shell environment that makes it fail. Any ideas what could it be?
When searching help from this forum first to this problem I ran into post that indicated the same problem and the fix for that was recreating admin/root account. Although I am pretty familiar with *BSD and UNIX systems, I didn't quite get what was meant by that. As far as I know the root account can't be easily recreated?

Problem with installation on PIV

I have a problem with installation Oracle 9.0.1 database on my
RedHat 7.1 and 7.2 dist.
My machine is PIV 1.4/768MB/40Gb
On PIII 933/786/40 everethin works fine.
Where is solution for my problem ??

Hello,
PIV isn't problem on Linux. (I am tried)
What is your problem ?
regards
peco

Problem with installation - Augigy

I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
Help?

same problem here, is there a possibility zu force installation?

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Problem with installation of Adobe Air 2.6

Hi,
I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
[Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
[setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
[setup:11894][INFO] Commandline is:
[setup:11894][INFO] No installed runtime detected
[setup:11894][INFO] Relaunching with elevation
[setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
[setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
[setup:11894][ERR] Runtime Installer end with exit code 7
How can I solve this problem? Thanks in advance for help.

I'm not certain that Mageia 2 Linux is supported. This Release Notes page and this Install Help page don't mention Mageia, just
Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
Roy

My institution purchase Adobe Acrobat XI pro but with a recent software update, I have lost access.

My instituion purchased Adobe Acrobat XI pro. With a recent software upgrade, I have lost all access.

Hi Dawn,
We might want to have a look at the install logs to determine the cause.
Please try the following basic steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

ITunes will not up date get a messge saying problem with installer packge

itunes will not up date get a message saying problem with installer packge

TRy the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Acrobat x pro - problem with installation

Similar Messages

Maybe you are looking for