Acrobat x pro won;t install...keeps crashing with same error message

I have tried numerous times to install Acrobat x pro from my creative cloud subscription. It does not install properly each time sending me this error message:
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 4 error(s), 0 warning(s) ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 ----------- ERROR: DW006: Apple Package failed to install successfully. ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 ----------- ERROR: DW006: Apple Package failed to install successfully. ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Acrobat Professional: Install failed ERROR: DW050: - Acrobat X Pro : Install failed -------------
A little more info that might help 1) My first install worked fine for several weeks. I unstalledd it and applied adobe cleaner to assure it was fully uninstalled to fix an unrelated issue, then was never able to reinstall it after
2) here's my system info:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          8 GB
Bus Speed:          1.33 GHz
3) all of my other Creative cloud apps work fine
any ideas?

Error "Exit 6" or "Exit 7"
CS6 applications in Creative Cloud unexpectedly revert to trial mode
Mylenium

Similar Messages

My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while

Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

Lightroom 4.1 keeps crashing with an error message.

Sorry, new to the forums and Lightroom. Please bear with me.
Lightroom 4.1 keeps crashing. I can't get any editing done on my client's photos. I get an error message (no error number given) stating something along the lines of "encountered an error ad must close."
I would be extremely grateful for any help offered.
Thank you in advance!

Any changes to your system lately?
You may want to remove LR 4.1 and install the latest 4.x version which is 4.4.1 Windows / Mac and is a free update.
This will not harm your data.

HT203128 my itunes keeps crashing with an error message.

both my windows and itunes are up-to-date. i've checked all the previously suggested methods to solve this issue (completely remove - reinstall itunes, removing QT, etc.) but none helped. any idea? Thanks.
the error message is usually something like this:
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
12.1.2.27
Application Timestamp:
55236b62
Fault Module Name:
KERNELBASE.dll
Fault Module Version:
6.3.9600.17415
Fault Module Timestamp:
54505737
Exception Code:
80000003
Exception Offset:
00000000000de002
OS Version:
6.3.9600.2.0.0.768.101
Locale ID:
1033

Hello pkiss777,
I'm sorry to hear you are having this issue with iTunes. If you continue to have issues with iTunes crashing or hanging, you may find the troubleshooting steps outlined in the following article helpful:
Fix unexpected quits or launch issues in iTunes for Windows - Apple Support
Sincerely,
- Brenden

Adobe Acrobat Pro DC keeps crashing with "Not Responding" message

Hi there, I just started using Adobe Acrobat Pro DC and it keeps crashing with a "not responding" message. It never used to happen with acrobat XI. Any ideas?
I'm using Windows 8.1 on an Acer with AMD A10-5700 APU 64bit OS...

Hi ,
Does this happen while accessing any PDF ' or when you launch Acrobat ?
You could try repairing Acrobat and see if that helps .
Is there any error number or exit code associated with the error message ?If yes ,please share the screen shot of the same.
You could also uninstall Acrobat using the Cleaner Tool .Here is the link to download Cleaner Tool .
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Once uninstalled you could try downloading it again .If it is a subscription ,you could refer the following link .
https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html
You could restart your machine as well and then try to launch Acrobat .
If it is a perpetual license ,you could refer to this one .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Make sure to disable all the third party software before you start installation .
Let us know how it goes .
Regards
Sukrit Dhingra

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

You have a number of things that will make this not work.
Your mailto link is not the way to go, take a look at this and it should get you on the right path.
http://www.paulgdesigns.com/learncontactform.php
On your action page, you can have it give the thank you message that you want. Having a seperate page saying they forgot to do something complicates matters more than you might wish at this point, and usually irritates people. however if you decide you want to go that way, look up "sticky forms". What this does is re-populate the fields when they have to go back to correct.
A better way would be to validate the information, you can use Spry if you want which is built into dreamweaver.
You also have in your html form this
enctype="multipart/form-data"
That is used for sending files, and since you are not, the form would not work, so you want to remove it.
Hopefully that will give you a starting point.
Gary

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.

Try again in a couple of hours - sometimes it is a temp condition
LN

I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

I am having trouble installing lightroom 5 with this error message:
Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
what should I do? Billmeb

Hi BillMeb,
Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
Regards,
Romit Sinha

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

JPPI-
Did you try it with the iTunes your Mac already has?
Try running Software Update in your System Preferences. That should bring your computer up to the latest software available for 10.4. You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
Fred

Acrobat x pro won;t install...keeps crashing with same error message

Similar Messages

Maybe you are looking for