Acrobat X's Display Settings

Hello,
I'm not new to Acrobat, but I am new to X.
I just successfully connected my new router to my existing netwotk. This installation was an upgrade. The installation went surprisingly well. I'm very pleased with the installation.
I wanted to know more about the USB port on my new router, so I was able to D/L the User Guide from Cisco.com. The UG is an online PDF document.
BTW, I have a visual impairment which requires me to zoom in on pretty much anything.
I installed the latest Adobe Acrobat reader yesterday (v. 10.x.x, I think) I couldn't zoom nor could I save the UG.
Am I missing something, here?
I even checked Acrobat's 'Display Settings'. The display settings were already set to the 'Fit Width' setting, but when I return to the UG, it's obviously displaying the 'Fit Page' setting, which is too small for me to read.

You have to realize that there is preference setting that allows the user to set a default view when there is no initial view set in the PDF. It appears that Cisco has set an initial view for their PDF. You can over ride this initial view by the short cut key combination of <Ctrl> + 2 after you open the PDF. You could also set the zoom to actual size using the <Ctrl> + 1 key combination.
With Acrobat and an unprotected PDF you could change the vendor's initial view to 'default', the fit width, or actual size.
I could also help you tell us what product manual you are trying to read. Some manuals are part of another application.
You could even contact Cisco and ask them to make their PDF more accessible friendly.

Similar Messages

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

Display settings in System Preferences acting up

I'm having trouble with my Display settings under System Preferences. I am not using an external monitor. My display seems to be working fine, but when I open Display settings to change resolution and colour, weird stuff happens. Basically, I cannot use this preference pane at all.
My display is 1920x1200, but when I open the Display settings, I get two windows, one telling me that "I am about to change [something something], some applications cannot display information correctly if the screen has less than 800x600 pixels", and the other one, the usual main window, telling me that my resolution is now 640x480 (it isn't).
If I hit OK in the extra window that pops up, my resolution changes to 640x480 or something similar, and I am unable to change back unless I reboot. Also, in the main Display settings window, it says <<< DO NOT LOCALIZE >>> under the list of available resolutions, as well as << do not localize >> in the box where I can change refresh rate. None of the buttons seem to be working.
Does anyone have any idea what is going on here? This was working just fine when I received my new MacBook Pro a few days ago, but now it's not. I've been repairing disk permissions and rebooting, etc.
I have been installing the trial version of Adobe CS5, but had massive problems with this installation (as a lot of people are reporting with CS5 and Snow Leopard...) and uninstalled them again, cleaning out Adobe preference files. Could I have deleted some other important files by accident in this process?

Quit System Preferences, then delete these files or folders.
Users/yourname/Library/Preferences /com.apple.systempreferences.plist
Users/yourname/Library/Preferences/By Host/com.apple.systempreferences.xxxxx.plist and com.apple.PrefPane.Network.xxxxx.plist (the X's will be numbers)
Also, Users/Home/Library/Caches
Now relaunch System Preferences. Let us know.
-mj

Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.

VGA CRT will not "wake up".. help please. Reset display settings shortcut?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James

Turned out to be a faulty DVI to VGA adapter.

VGA CRT will not "wake up"... help please. Reset display settings?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some NvDia card
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some Nvidia Graphics card w/ DVI to VGA adapter

Can you start up in "safe mode"? If so, you can reset your display settings and reboot. If not, you have a problem either with your video card or your DVI/VGA adaptor

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

HT5219 how do i get my macbook pro 13" retina to keep its display settings the same when I unplug it from my thunderbolt 27" display?

I have just bought a macbook pro 13" with retina display and a 27" thunderbolt display to go with it.
I plug in the display, set it all up to the look and format that I want to use (same for both displays, I am using the mirroring feature), and then when I unplug the macbook from the 27" display it's settings revert and I can't see half my windows as they fall off the edge of the smaller macbook screen.
Is there a way to make the macbook keep the same display settings, even when I unplug it from the 27" display?

Not that I know of... but if someone comes along with a method, I would certainly be interested...
Clinton

Reader XI, An Error Exists on this Page, Acrobat may not display

Hello,
I need some help please. The small business I work for as a contract employee uses Google Doc's, and we input our information into spreadsheets on a daily basis, from our home computers.
My home computer is XP Professional, and I am using Mozilla Firefox 36.0. I know we are using older computer programs, but until we can afford newer computers we have to use what we have.
Prior to today, when I printed off my spreadsheets in Google Doc's I had no problems, however tonight I just starting receiving this error message; An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the file.
I contacted my manager and had her send me a new spreadsheet, Invitation to Edit and input my information into the new spreadsheet.
I then go to my timesheet, and highlight all the rows that I would like to print, then I hit the print key, then I get the box that states, opening my timesheet which is a PDF which is an Adobe Acrobat Document, then I have this message, What should Firefox do with this file? I have it set to open with Adobe Reader (default) do this for files automatically like this.
The file downloads, however I have noticed that Adobe at times has a difficult time opening up right away and then I receive the error message that Adobe isn't responding and I end up closing the program out and restarting my computer.
This error message shows up just before the document begins to print and the document prints off with out any problems.
I even did a repair and that didn't help. My printer is a HP Color LaserJet 4500 and I've had no issues with Adobe prior to tonight.
Do I need to uninstall Adobe Reader & Re-install the program?
I can't send a copy of the file because it contains confidential material.
I've also posted this message on Adobe Acrobat, and have not received a response.
Please advise.
Thank you,

Hello,
Thank you for responding. Sorry that my message is so confusing.
In Google Doc's we are able to highlight/selected portions of a PDF to print.
In Mozilla Fox under Applications, Portable Format Document (PDF) Use Adobe Reader (default).
So when I go to print off my timesheet, after I have highlighted everything, I get this message: I've chosen to open my timesheet which is: Adobe Acrobat Document from https//docs.google.com. What should Firefox do with this file? Open with Adobe Reader (default).
Do this automatically for files like this from now on. I click on the OK and the file downloads as a PDF file in Adobe Reader. On Google Doc's I click on the print key then I am able to open up my printer menu. Its after I click on the print key that I receive this message.
So what do I do please?
Thank you,
Maureen A. Mumm
From: pwillener <[email protected]>
To: Maureen Mumm <[email protected]>
Sent: Friday, March 6, 2015 8:05 PM
Subject: Reader XI, An Error Exists on this Page, Acrobat may not display
Reader XI, An Error Exists on this Page, Acrobat may not display
created by pwillener in Adobe Reader - View the full discussion
Maureen Mumm wrote: I then go to my timesheet, and highlight all the rows that I would like to print, then I hit the print key, then I get the box that states, opening my timesheet which is a PDF which is an Adobe Acrobat Document, then I have this message, What should Firefox do with this file? I have it set to open with Adobe Reader (default) do this for files automatically like this.
This is very confusing to me; Adobe Reader does not have such a functionality (to print highlighted/selected portions of a PDF). Could it be that this is a functionality of Google Docs? Also I have never seen a message "What should Firefox do with this file?". If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262026#7262026 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262026#7262026 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

How to reset display settings? 120 hz over HDMI on 2014 MBPr makes screen go black

Hi, I have a 15" 2014 MBPr with the 750m. Recently, I bought a TV, a vizio M422i-B1. One of my main reasons for buying the TV was to use it as a third display for my mac. I have two displays already connected, a 27 inch 1440 display over thunderbolt, and another 23" display that is 1080 and connected over the other thunderbolt.
I got the TV mounted above my desk, and ran an HDMI down from the TV to where I put my laptop, and plugged the TV in to the computer in the HDMI port on my mac.
It worked, but the refresh rate was set at 60 for the TV on my computer, but since my TV is 120Hz, I set the refresh rate in display settings to 120. It worked fine, and the mouse movement on the TV was more normal looking, so I was happy.
I put the computer to sleep a little later, and came back, and it wouldn't wake up, even after disconnecting all the displays and other peripherals, it would not wake. I restarted the computer, and with nothing connected it rebooted and worked normally.
I connected everything one by one, USB stuff first, fine. 1440 display over thunderbolt, and everything was fine. same with the 1080 display.
I went to plug in the TV again, and everything went black. I had to restart the computer without the TV plugged in to do anything. Restarting with the TV plugged in to the mac doesn't fix anything.
I know my issue is the refresh rate for the TV being set at 120Hz, and I have to change it back to 60 Hz, my problem is that as far as I know I have to have the TV plugged in to change the refresh rate, but if I plug the TV in it kills the computer. Is there a way to reset the display settings so that it doesn't "remember" that I want the TV to be 120Hz?

Did you ever figure this out?

My screen will no longer turn on, how do i reset my display settings on mac pro

Hi, i'm using a mac pro and cinema HD display, the display was usually set to using the power button on the side as an actual power button, i decided to change it to turn computer sleep mode on and off and it still worked fine whilst it was on, i then turned the set off for the night, the next day the screen did not come on with the computer and i cant turn the screen on becuse the button is set to sleep the computer. Any way to reset my display settings or turn my screen back on?. thnks

nevermind solved

Read Only Display Settings Help

Hello,
I am trying to control what some users can see in a page. Right now I have an item field (Roles) display as checkbox. Roles is a field in my table that I created with RolesA, RolesB, RolesC. Note: these are not htmldb roles.
In my Edit Page Item --> Read Only Display Settings --> Read Only Condition Type --> PL/SQL Function Body Returning a Boolean. Under Expression 1, I coded:
return not htmldb_util.current_user_in_group(p_group_name => 'APP Admin')
I want this item to read-only unless the user happens to be a member of group 'APP Admin'.
The expression is not working. It seems that no matter what user is logged in they can modify this item. Is there another way I can do this for controlling what my RolesA, RolesB, and RolesC can modify? BTW, this item is a checkbox.

Dung,
That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
Scott

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Display settings

Hi Experts,
Is there any other classes available for display settings in ALV other than the below mentioned.The following classes doesn't works in SAP 5.0.
Is this belongs to NetWeaver family?
cl_salv_table
cl_salv_functions
cl_salv_display_settings
Can any one pls help it out to do the same in abap objects?
Regards,
User

Hello Raj
If you are indeed working on an ECC 5.0 system then I do not see where the problem is. The following sample report ZUS_SDN_CL_SALV_TABLE_DISPLAY demonstrates how to adjust the layout of the ALV list. In addition, you see the coding for event handling and column adjustment.
*& Report ZUS_SDN_CL_SALV_TABLE_DISPLAY
REPORT zus_sdn_cl_salv_table_display.
TYPE-POOLS: abap.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
DATA:
go_table TYPE REF TO cl_salv_table,
go_events TYPE REF TO cl_salv_events_table,
go_columns TYPE REF TO cl_salv_columns_table,
go_column TYPE REF TO cl_salv_column,
go_display TYPE REF TO cl_salv_display_settings.
PARAMETERS:
p_outlen TYPE lvc_outlen DEFAULT '20',
p_title TYPE lvc_title DEFAULT 'New Grid Title'.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_double_click FOR EVENT
 if_salv_events_actions_table~double_click
 OF cl_salv_events_table
 IMPORTING
 row
 column.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
 DATA:
 ls_knb1 TYPE knb1.
 READ TABLE gt_knb1 INTO ls_knb1 INDEX row.
 IF ( syst-subrc = 0 ).
 SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
 SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
 CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
 ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
 WHERE bukrs = '1000'.
* Create ALV grid instance
TRY.
 CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
 IMPORTING
 r_salv_table = go_table
 CHANGING
 t_table = gt_knb1.
 CATCH cx_salv_msg .
ENDTRY.
* Create event instance
go_events = go_table->get_event( ).
* Set event handler
SET HANDLER:
 lcl_eventhandler=>handle_double_click FOR go_events.
PERFORM adjust_column.
PERFORM adjust_display.
go_table->display( ).
END-OF-SELECTION.
*& Form ADJUST_COLUMN
* text
* --> p1 text
* <-- p2 text
FORM adjust_column .
CHECK ( p_outlen > 0 ). " In this case use default output length
* Get columns instance
go_columns = go_table->get_columns( ).
* Get single column instance
TRY.
 go_column = go_columns->get_column( 'LOEVM' ). " delete flag
 go_column->set_output_length( p_outlen ).
 CATCH cx_root.
ENDTRY.
ENDFORM. " ADJUST_COLUMN
*& Form ADJUST_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM adjust_display .
go_display = go_table->get_display_settings( ).
go_display->set_striped_pattern( abap_true ).
go_display->set_list_header( p_title ).
ENDFORM. " ADJUST_DISPLAY
Regards
Uwe

Acrobat X's Display Settings

Similar Messages

Maybe you are looking for