Acrobat X Security Settings Not Working

I made a PDF portfolio with Acrobat X and set password security to not allow any changes. The document title says it is SECURED, but pages can still be extracted. What is going on? What did I miss?

I also tried changing the compatibility from Acrobat 7 and later to Acrobat X and later. Still no go.
Setting security to "any changes except page extraction" is ineffective. The security dialog says that page extraction is not allowed, but I can definitely extract pages. Setting security to "no changes" is also ineffective.
Here is the dialog from "any changes except page extraction"

Similar Messages

  • Acrobat 9: security does not work in serial emails

    If I create PDF´s as a serial email out of MSWord2003 (XP) or MSWord 2007 (Vista) by the PDFMaker, and set any security options, the security options are ignored in the generated and sended PDF, which means the reciever has none of the set security restrictions and can do everything with this PDF. If I create a "standard" PDF with the same document or convert to PDF and send by email (without serial email) everythings works correctly. What can I do to create serial emails with secure PDF´s?

    Hi Gabriel,
    Please try repairing Acrobat from the 'Help' menu and check.
    Also check if Acrobat has been updated to the latest patch i.e. v9.5.5
    Regards,
    Rave

  • My Acrobat Snapshot function is not working?

    My Acrobat Snapshot function is not working?

    No security and Acrobat 9 Standard
    Michael A. Lough
    Sent: Friday, July 22, 2011 8:49 PM
    Subject: Acrobat Windows My Acrobat Snapshot function is not working?
    Is security set on the PDF? What version of Acrobat?

  • Dimension security is not working if user have two roles in SSAS while connecting from Excel

    Hello Genius,
    I am facing the issue when user trying to connect the cube from excel if user have more than one role in ssas db.
    Role 1: Countryuser, I have implemented the dimension security with country
    dimension and  countrycode attribute.
    Role 2: CityUser,   I have implemented the dimension security with
    city dimension and  citycode attribute.
    If user is mapped to any one of above role dimension security is working perfectly according to the logic but mapped to both role, cube is exposing all the data in this case dimension security is not working.
    Please give me the solution to fix this issue or incase I am wrong kindly advice.
    Thanks
    Ganesh

    This is the expected behaviour as allowed sets in roles are unioned together.
    This is not a problem when your roles are restricting across a single attribute.
    eg.
    US_role = {[Geography].[Country].[USA]
    France_role = {[Geography].[Country].[France] }
    as someone in both roles ends up seeing {[Geography].[Country].[USA], [Geography].[Country].[France] }
    But when you have different attributes:
    NY_role = {[Geography].[City].[New York] }
    France_role = {[Geography].[Country].[France] }
    The first role is unrestricted on countries and the second is unrestriced on cities which is effectively:
    NY_role = {[Geography].[Country].AllMembers , [Geography].[City].[New York]  }
    France_role = {[Geography].[Country].[France], [Geography].[City].AllMembers }
    And when you union those two sets together you end up with:
    {[Geography].[Country].AllMembers , [Geography].[City].AllMembers }
    Which means that someone in both roles can see everything.
    So if you want to restrict someone to City = New York and Country = France you have to create a
    single role where both attributes are restricted. So if you have a lot of these combinations you will either have to create a lot of "combination" roles or look at dynamic security.
    The other thing that might work is make sure that you only give some users access to certain cities and others access to certain countries. It's the mixing of the two for a single person that causes the issues.
    http://darren.gosbell.com - please mark correct answers

  • Acrobat 7.0 does not work with lion

    Why does my Acrobat profeesional 7.0 not work anymore. just installed Lion os.  Can this be fixed? Do I have to buy another version?

    Acrobat X Pro is the only version Adobe states works with Lion. You'll have to upgrade.

  • Settings not working after activating icloud

    settings not working after activating icloud
    clicking on any button under settings leads to icloud. i am a new user of apple

    Hi sona ayanikalath,
    Welcome to the Apple family! I understand that you are experiencing some issues with your new iPhone 6. Can you clarify your issues a bit more? With the information provided, I recommend restarting the settings application as well as your iPhone:
    Force an app to close in iOS - Apple Support
    http://support.apple.com/en-us/ht5137
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201559
    - Matt M.

  • Apple 10.4 managed clients dock settings not working

    I  have an issues with  3 or 4 of my 10.4 clients all are managed by WGM on an apple 10.5 server.  The I have managed dock settings on all apple clients are getting the proper dock settings however I have 3 or 4 clients that are not.  The clients that are not getting the dock settings are in the correct computer group.  And I don't see any of the clients dedicated in the computer group.  And suggestions or tips would be welcome help.

    THAT WORKED and all is back to normal.
    By the way I did not lose any of the icons on my dock either. All the apps light up under the icon and they now mimimize correctly!!
    Thank you very much capfred!!!
    Chet
    captfred East Coast, USA
    This helped meRe: dock settings not working     Sep 3, 2012 7:34 AM    (in response to CaptainChet) 
    Try deleting com.apple.dock.plist from the preference folder located in your user Library.
    You can open the hidden library in Finder's menubar,  Finder > Go > hold the option key down > select Library.
    Edit: you'll have to add back program icons to the dock that you moved there.

  • Clicking "Download now" on the "Download a free trial of Acrobat X Pro" is not working. Any help?

    Clicking "Download now" on the "Download a free trial of Acrobat X Pro" is not working. Any help?  I even opened an account and logged in and it still did not work.

    What?  I don't understand if you are asking me a question or telling me what to do.  I am using IE9 and when I clicked the "Download now" button, a new tab did not open or anything like that nor did another window open.

  • Compression settings not working on Premiere Pro CC

    I am a freelance editor working for a satellite delivery company. They have specific settings they require for their uplink signals. These setting have worked great on CS5, CS6 and CC2014. However the company is now using CC and these settings create HUGE pixels and the file is unusable. Why do the same settings not work on CC?

    You're welcome.
    https://blogs.adobe.com/kevinmonahan/2013/09/11/marking-posts-as-correct-or-helpful-on-the -adobe-forums/

  • Acrobat x pro suddenly not working.

    acrobat x pro suddenly not working.can't open any of my pdf files. what should i do?

    Hi,
    Please reset Acrobat Prefrence by Renaming Acrobat to Acrobat_old from below mentioned location and then try to open pdf files.
    1. C:\Users\(USERNAME)\AppData\Local\Adobe
    2. C:\Users\(USERNAME)\AppData\Local Low\Adobe
    3. C:\Users\(USERNAME)\AppData\Roaming\Adobe
    Regards,
    Jatin Dembla

  • Secure boot not working with MSI Z77a-G45 And system reserve not showing

    Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows.  Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference.  I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??. 

    fixed it is my legacy+uefi another forum got back to me.

  • Flash security settings not coming up in Firefox 17.0

    Hi I have been successfully running my web project on Firefox browser till now.
    I am using adobe flash 11.5 version in my project and i am using the same for recording audio and video from webcam and the headsets.
    Before today everything was working quite good ,until..
    I updated my firefox browser to version 17.0 and found that my flash security settings just vanished in the thin air.
    I mean my flash used to show security settings(if the settings are set to deny or ask me mode),but after the update of firefox 17.0 ,i am not getting any security settings windows from flash.
    I am manually changing the settings using control panel.I cant ask my users to do this.
    So please look into this and provide a fix as soon as possible.
    Thanks

    can we get a link to see for ourselves? Or paste the HTML
    code up here (specifically that which embeds the flash in the
    page)

  • Adobe Acrobat 8 Security Settings

    Hi,
    I'm new to this and will try to be to the point. I am currently running a form created in LiveCycle for the staff at my job. They are accessing the form through Reader 7, but when they click the "Email Submit Button" it is telling them the security settings do not allow the propertyy or method.
    I went and checked the security settings and I have no security selected. I am not sure what I am doing wrong, or if this is just Reader not allowing the option at all.
    Any help would be greatly appreciated. Thanks!
    -Ken

    Thanks Geo!
    I tried "Enable Usage Rights" in Adobe Reader, but that didn't work either. Where can I find the "Extended Reader Forms Rights" option at?
    I was thinking I might need LiveCycle ES, but I'm still holding out that I won't. Thanks again for the assist!
    -Ken

  • Flash Global Security & Links Not Working?

    Hi all,
    I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
    I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
    When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
    Actionscript 3 on the Contact page looks like this:
    import flash.events.MouseEvent;
    //---Blog Button---\\
    var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
    Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
    function eClick(event:MouseEvent):void{
    navigateToURL(getBlog, "_self");
    //---Twitter Button---\\
    var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
    Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
    function eClick1(event:MouseEvent):void{
    navigateToURL(getTwitter, "_self");
    //---Flickr Button---\\
    var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
    Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
    function eClick2(event:MouseEvent):void{
    navigateToURL(getFlickr, "_self");
    //---Email Button---\\
    var getMail: URLRequest = new URLRequest("mailto:[email protected]");
    Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
    function eClick3(event:MouseEvent):void{
    navigateToURL(getMail, "_self");
    I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
    Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

    Thanks Samuel.Wong and Ned Murphy for the information.
    I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
    The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
    Maxx

  • [SOLVED] Cinnamon appearance settings not working.

    I have a strange problem concerning Cinnamon 2.2.0-1 from [community-testing], in which some appearance settings simply do not work. Specifically, I can't change icons or gtk theme, and making any change in cinnamon-settings has no effect whatsoever on the system. I've tried changing the appearance with lxappearance to some success - now the panel and some Gnome3 applications show the selected theme and icons, but the rest of the applications keep the old appearance settings. I have no .gtkrc files in my home folder and I start Cinnamon from LightDM.
    This is the output from running cinnamon-settings from a terminal:
    arachnid92 %> cinnamon-settings [~]
    ** (cinnamon-settings.py:3156): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    libupower-glib.so.1: cannot open shared object file: No such file or directory
    Failed to load module: /usr/lib/cinnamon-control-center-1/panels/libpower.so
    Could not find bluetooth module; is the cinnamon-control-center package installed?
    Could not find wacom module; is the cinnamon-control-center package installed?
    __init__ took 131.978 ms
    pacman -Q | grep cinnamon:
    arachnid92 %> pacman -Q | grep cinnamon [~]
    cinnamon 2.2.0-1
    cinnamon-control-center 2.0.9-1
    cinnamon-desktop 2.2.0-1
    cinnamon-menus 2.2.0-1
    cinnamon-screensaver 2.0.3-4
    cinnamon-session 2.2.0-1
    cinnamon-settings-daemon 2.0.8-6
    cinnamon-translations 2.0.3-1
    Last edited by Arachnid92 (2014-04-18 17:27:58)

    Confirming @Arachnid92's problem.
    I've got a whole raft of problems with the latest update, which I've listed here.
    EDIT: I'm going to wait until these two are updated before I start reporting bugs, purely because it may just be that not all the updates have been pushed at the same time.
    Last edited by clfarron4 (2014-04-14 22:38:40)

Maybe you are looking for