Acrobat X - Text Wrap - Header

Hi,
I need to place a disclaimer on each page of various documents we send to clients. This disclaimer is up to 600 characters long. In previous version of Acrobat the disclaimer text would wrap but with Version 10 there doesn't seem to be any Wrap function i.e. the header text extends well past both edges of the page.
Is there a way to force the header text to wrap?
Thanks
Paul

Ok. I figured out that if I apply the CR LF to the text before pasting it into the Adobe header that this does the job of Wrapping the text.
Next problem - Adobe seem to have restricted the number of characters allowed in a header to 508 (this restriction didn't apply in version 9). Is there some way to increase this to the 600 characters that I need?

Similar Messages

Saving in Acrobat 9 and Opening file in Acrobat 8... text wrap does not work

I work with a client who has Acrobat 8, I use Acrobat 9. I am saving a pdf that has form fields that need to wrap text and scroll. They have the properties of "multi-line" and "scroll text" already checked, and when I test it on my computer, the text wraps and scrolls, as it should. However, when my client tries to type inside the form field, the text will not wrap, even though it is wrapping on my version of acrobat. How can I get the text to wrap on my client's version (8)?

Do you know of any solutions to my problem? To clarify, my client uses Windows XP Professional, Adobe 8 and Internet Explorer 7

WD ABAP: Problem with Header text wrapping in Table Column

Hi,
I am unable to achieve Header Text wrapping for the TABLE columns. I have set the property "HeaderTextWrapping" to TRUE for each column and the "Fixed table layout" property has been set to TRUE.
Is there some property of the table/column I have to set to achieve this? Or does selection of a specific property remove option of HeaderText Wrapping?
Thanks,
Adithya

hi..
Try increasing the width of column keeping other thing as it is as you have done. And yes check whether cell editor property wrapping is set true.

Text Wrap options not showing in InDesign CS3

Using InDesign CS3 on a Mac 10.4. I've had this problem for a couple of months now and it's getting past the point of annoying. When I open my text wrap options pallete it's blank even when I expand options. I can see the text wrap icons in my header panel, but I no longer have options to change the right/left/top/bottom margins. Just a general "add wrap" and "remove wrap". Is there any way I can get my pallete back? I've tried defaulting my tools, but still it does not show up. I don't know what to do to get it back.

Did you try resetting preferences? While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files. If you don't get the message about deleting preferences, you weren't fast enough.
http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
Ken

Text wrap around an achored object

I'm continually frustrated by a text wrap issue around an achored object in a story. I have two anchored textframes that are taking up the top half of a text frame, one of them has a full column text wrap applied to it which forces the first title of the regular text to begin beneath it. My issue is that sometimes this title falls too close to the anchored text frames but if I add space to the bottom of the text wrap, the title does not snug to the text wrap but will stay tight until the wrap adjustment invades the cap height and then it will suddenly jump way down what looks like the full line height of the style, creating way too much of a gap. I can't seem to get a clean even space between my anchored textframe and the first line of text. I'm doing hundreds of files with this set up and they are looking different because the anchored text frames are all different sizes and I can't get that space between them and the first title to be uniform. I'm sure I'm missing an option somewhere, but I can't figure out what it is. I want the first line of text to snug up to the edge of the text wrap, and it just won't do it. I've looked through all my style options and can't figure out what I'm missing. "Align to grid" is set to "None," and "Start Paragraph" is set to "Anywhere."
I'm really confused by this. Anyone have any ideas what I'm doing wrong or if I've run up against a limitation in the application?
I'm using CS5 on a Mac 10.5.8

Sorry Grant,
Your "solution" does not work in this instance. The boxes you see in my image are the first things on that page. The anchor paragraphs are set to start in a new column so that they purposely start a new page. The story starts 3 pages before this and you can't have anchored objects more than a spread away from their anchors, so your solution simply does not work. I would have to break my lesson into multiple stories, which is the very thing I'm trying not to do to keep my workflow efficient.
It looks like it is a limitation of ID's anchored object workflow (which has never been ideal, but I'm trying to work with it). Unfortunately, tables are also not a safe solution because long tables used together with span/split column features cause ID to crash (predictably)--as far as I can tell, Adobe doesn't appear to be interested in fixing this bug. I've learned the hardway not to combine them in any workflow unless I want to restart ID multiple times a day.
In case you are wondering, this complicated workflow resulted from a shortcoming in ID anyway. I have to place the text in table cells so that I can use the SIde Heads plugin to pull them automatically into anchored objects. I have to anchor them into floating objects to get the rounded corners on background squares that is BEHIND the text. I could do it as tables in the flow of text if I could create anchored backgrounds with rounded corners that floated behind the tables, but unfortunately, ID will not let you change the stacking order of anchored objects--they always float in front and there is no option to push them behind--and tables are uniformly square and boring. I tried several times to create an easily automatable workflow for this project, and complicated as it is, this is the only one that actually works.
I will have to manually adjust the paragraph spacing and leading. That seems to be only adjustment that gives me the fine control that I want. I just wish it were consistent from document to document so I could set it in the style and not have to eyeball everything.

Text wrap issue:ShowDetaillItem chop-off in the PanelAccordion.

Issue: Text wrap issue in ShowDetailItem header. Tittle of the S+howDetaillItem+ chop-off does not display completely in the PanelAccordion.
I have a few texts that does not wrap in ShowDetailItem Header used for the panel accordion. I could not fix it after trying a few options like changing the css skin, and in the design property inspector.
Please suggest a way to fix this.
Oracle Jdeveloper 11.1.1.5 is the version.
Windows XP professional sp3
Edited by: 899970 on Nov 30, 2011 11:34 AM

Thanks for your response.
Yes, we dont have enough room on the page.
I want the text to wrap and display in the second line as it has more no. of letters compared to the other texts available.
Please suggest me a way to get the text displayed the way I want it to be.
Thanks
Sam
Edited by: 899970 on Nov 30, 2011 3:13 PM

ID CS3: Text Wrap stopped working!

I suddenly have an odd problem: a text box that refuses to honor the text wrap setting on another box. The one that is supposed to force the wrap does have the wrap turned on. The box that is supposed to honor the wrap setting is not set to ignore the text wrap.
I've tried the common fixes like going into composition preferences and toggling on and off the "Text Wrap Only Affects Text Beneath" box, and trashing ID's preferences. In addition, I have run Onyx to repair permissions and run maintenance scripts, and in desperation also cleaned the font cache.
I'm really stumped here. The box that the text is supposed to wrap around is an object that I keep stored in a library (a column head for a regular contributor to a magazine), and it has performed flawlessly for months. Nothing is changed in that respect from the previous issue of the magazine. The two boxes are on different layers, but that has been no problem in the past.
I should add that the problem is not limited to that particular library item; it seems to also happen with other column heads from that same library.
Does anyone have any hints as to where I should go from here? I'm at a bit of a loss

Finally discovered the problem. Somehow my text box default had changed from text wrap off to text wrap on (I'm sure I wasn't paying attention at some point) and, with both text boxes set to wrap, they were somehow canceling each other out.
Once I shut off the text wrap on the article box, everything snapped back to normal.
(whew)

Text Wrapping issue in Long Texts in ECC 6.0

Hi,
We are migrating Tasklist data from SAP 3.1i system to SAP 6.0. So we were moving the existing Long Text in 3.1i with the same paramenters to 6.0, I am facing an issue of text Wrapping(while displaying).
I am updating complete header data like - TDID, TDOBJECT, TDNAME, Lang, TDFORM(SYSTEM as in 3.1i), Version, Line Size(72 as in 3.1i), Number of Lines by using SAVE_TEXT FM.
I can see the text is updated properly but when i open the text in display mode(With PC Editor), i can see the text getting wrapped. Line size is limited to 40 Characters whereas in 3.1i its 72 characters.
Please help me here.
Thank you.
Prasad

Actually i tested with READ_TEXT function module. All parameters are fine, matches exactly with 3.1i but i am facing this issue while displaying.
In display mode - in 3.1i Ruler shows 7.2 Inches(72 Characters) whereas in 6.0 its 4 inches(40 Characters). Should i go for any settings change so that i can see complete 72 characters in 1 line.
Prasad

Saving in Adobe 9 and Opening file in Adobe 8... text wrap does not workIwo

I work with a client who has Acrobat 8, I use Acrobat 9. I am saving a pdf that has form fields that need to wrap text and scroll. They have the properties of "multi-line" and "scroll text" already checked, and when I test it on my computer, the text wraps and scrolls, as it should. However, when my client tries to type inside the form field, the text will not wrap, even though it is wrapping on my version of acrobat. How can I get the text to wrap on my client's version (8)?

Do you know of any solutions to my problem? To clarify, my client uses Windows XP Professional, Adobe 8 and Internet Explorer 7

Trying to set a hyperlink when text wraps to next line

I'm trying to set a hyperlink in InDesign. The URL text wraps to the next line. One time this worked fine and the link was correct. For two other instances, it did not work. When I checked the link in the PDF file, it only "grabbed" the first portion of the hyperlink address. Anything after the first "/" was lost. Is there a way to make sure the entire URL address gets included in the hyperlink? Thank you!

Acrobat has trouble autorecognizing URLs that break across lines. You ned to create a "real" hyperlink from the text in ID, then include them in the export. If you don't know how to do that, see the Help.

Planning Layout Column Width and Text Wrapping

Hello,
Is there a way in a BPS layout to set the column width to a certain length and have the column heading texts wrap? I noticed an answer for adjusting a table API for BW Web columns, but not BPS.
Thanks,
Cherie

A coworker figured out by selecting the line break in the change subcomponent it wraps the column text.

JOptionPane Text Wrap

I'm trying to display text on a JOptionPane.showMessageDialog, but sometimes the the string can be so long the dialog box goes off the computer monitor. Is there a way to do text wrapping on a JOptionPane box?

Just in case anyone is still struggling with this, I wrote a method that works well to correct the problem. Sorry to dig up an old thread, but I just now joined the forum and saw this was still in stasis.
Hope it helps someone.
    public String wrapText(String passedStr)
        * This method solves the problem of JOptionPanes not automatically   *
        * wrapping long lines of text. Set the LINE_LENGTH constant to      *
        * the length you want each line to be. A newline character will be *
        * inserted at the first whitespace after each character located at   *
        * the LINE_LENGTH postition.                                         *
        * Known problem:                                                     *
        * - Traditional double-whitespace that appears between sentences    *
        *    can sometimes result in lines starting with whitespace, causing *
        *    the left edge of the text to look jagged. This can be "fixed" *
        *    by only hitting the spacebar once between sentences.            *
          // Constant to indicate the length of each line.
          final short LINE_LENGTH = 80;
          // Variable to indicate the next carriage-return position.
          int nextCR = LINE_LENGTH;
          // Create a StringBuffer copy of the string to wrap (passedStr).
          StringBuffer newStr = new StringBuffer(passedStr);
          // Read entire string from beginning to end.
          for (int i = 0; i < newStr.length(); i++)
               // Push back nextCR another LINE_LENGTH for all newlines found.
               if (newStr.charAt(i) == '\n' || newStr.charAt(i) == '\r')
                    nextCR = i + LINE_LENGTH;
               // Insert carriage-return at whitespace on or after nextCR.
               if (newStr.charAt(i) == ' ' && i >= nextCR)
                    newStr.insert((i + 1), "\n");
                    nextCR += LINE_LENGTH;
          return newStr.toString();
     }Usage:
JOptionPane.showMessageDialog(null, wrapText(stringThatNeedsWrapped), header, JOptionPane.PLAIN_MESSAGE);

PHP put page-specific text in header file

Hello! I am creating a website, and I have created a header that includes a title bar (ALL of my pages are .php). This code for the title bar is as follows:
<div id="titlebar"><table style="margin:0 auto;"><tr><td>TEST</td></tr></table></div>
When I put this into each page I create, I use this:
<?php require("header.php"); ?>
What I WANT to do is replace "TEST" in my title bar code with a php code that allows me to put in specific titles (which could be Home, Contact, Merch, etc.) in my individual pages. Is this possible, and if so, how?

OK, I deleted the table (I had used that when I first started making these pages, I was completely new to html, then learned css, and I'm just now tesing out php). Works better than I thought it would. Now, as far as everything else... this is my website: http://pcassistant.net It's a band website, and ALL I'm using the php for is putting the header and footer on my page. The top image, nav bar, and title bar are included in the header.php, the footer.php contains all normal footer info. I'm doing this to help out with changing the info in both the header and footer ,that way I don't have to do it to every single page, just that file specifically.
My index.php code looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Home</title>
<link href="http://asc.pcassistant.net/main.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="wrap">
<?php require("header.php"); ?>
<div id="content">
<p>I STILL have no freakin clue what to put on this page.</p>
</div>
<?php require("footer.php"); ?>
</div>
</body>
</html>
My header.php looks as follows:
<html>
<body>
<div id="image"></div>
<div id="nav">
   <ul>
   <li><a href="http://asc.pcassistant.net/index.php">HOME</a></li>
   <li><a href="http://asc.pcassistant.net/music.php">MUSIC</a></li>
   <li><a href="http://asc.pcassistant.net/band.php">BAND</a></li>
   <li><a href="http://asc.pcassistant.net/merch.php">MERCH</a></li>
   <li><a href="http://asc.pcassistant.net/contact.php">CONTACT</a></li>
   </ul>
</div>
<div id="titlebar"><p>TEST</p></div>
<br>
</body>
</html>
If you looks as the website, every page displays "TEST" in the titlebar. I want to be able to change this according to each page, but I want to keep the titlebar located in the header.php file. These pages are in their very early stages, and there's TONS more info to put on the pages, and more pages to add, so I want to keep all changes required as simple as possible, hence using php. With all that being said, is there a way to put in my titlebar in my header.php a php code to allow me to edit the title of each page individually.

How to make text wrap like this

Hello all.
I am working with text, and want to have a similar effect to that in the picture. What I mean by this is that I really like the columns, and how it indents when it needs to and the text still remains aligned across the columns.
Any ideas on how to do this? Thank you

But this is the point of going with InDesign: that you put in your text so that you can harness the power of InDesign to flow it along the columns and wrap it around inserted blocks automatically.
There's no point in simply copying images from Fireworks into InDesign. You'll just have some low resolution images in a layout program. It won't help.
Open InDesign. Open your Fireworks file. Select each text object in Fireworks, and copy the text from the vector object. Paste the text into InDesign. Maybe paste it into a text editor, first, so you have it as all one block.
Then, here's what you want to do in InDesign:
text flow: http://www.designertoday.com/Tutorials/InDesign/5245/Text.Flow.InDesign.CS3.Tutorial.aspx
and
text wrapping: http://www.creativepro.com/article/on-the-move-to-indesign-wrapping-text (sorry, this one's really old, look in the documentation)
Fireworks can't do either one of these things. Even Word and Acrobat (or another PDF creation program like Primo PDF) would work out better than Fireworks for what you want to create.

Text wrapping when exporting to .pdf

I'm running Pages 5.2 on OSX 10.9.2. When exporting my document to .pdf, it does not retain it's text wrapping. When viewing the document in Pages, everything is where I put it. When viewing the document as a .pdf after exporting, some of the text will no longer be wrapped around some of the pictures. Which text no longer wraps around which picture changes every time I export, even without altering the document in any way. I have tried grouping the objects and the text together, which only seemed to cause more text to fail to wrap.

I'm using Acrobat X. I've attached a cap of the InDesign poster, and what I get when exporting to PDF -- I lose the title, and "Directed by..." (which is the same type size/color as the playwright). Also, I have overprint preview checked for automatic (and tried all the other settings, too).

Acrobat X - Text Wrap - Header

Similar Messages

Maybe you are looking for