Acrobat XI - hyperlink properties is changing when the file is moves

02 final file
01 initial file
Good day Support,
Kindly advice the procedure to create documents from MS Word 2010 using the PDF maker add-on and keeping the links absolute.
When created the file, the link in pointing to the initial file as specified in the MS Word - the link is pointing to an file located on a specified path.
Whenever this document is moved is start pointing to another location according to the place this file is moved. the link stays on the same location and it should be called from there only.
Please refer to the pictures attached (01 initial and 02 final).
Your prompt advice will be highly appreciated.
Thanks / Mihai
Email: [email protected]

Further to above...
To solve the problem:
- Uninstalled MS Word 2010 and Removed Adobe Acrobat XI
- Installed MS Word 2007 and Adobe Acrobat PDF Maker 9.
If anyone will find a better solution please feel free to update this post.

Similar Messages

Positions on stage become changed when the file opens

I'm making a Flash animation in Flash CS4, using motion tweens to change positions and sizes of objects on stage. I frequently open the animation file and find a motion-tweened object has been moved to a new position from the one it was in when I last saved the file. All the frames in the tween seem to be affected. If I open the file again without saving, the object is still in the wrong position. I have had to redo or substantially correct a big tween several times. It's wasting time, and I can't rely on my work being in the state that I saved it last. I think the problem happens to the files when I open them after starting up Flash.
Does anybody have any idea what could be happening, and how to stop it?

Sorry, forgot details: I'm using Flash on Window XP Home ed. My version is Flash CS4 version 10.0.2.

How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

They seem to be a lot of extra work, and I don't see what the additional benefit is. I have several hundred links to do. I would appreciate learning what the benefit is, as I don't mind the extra effort if it will deliver the desired results.

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

Does the iphone cpu frequency change when the cpu load is different?

Does the iphone cpu frequency change when the cpu load is different, or it does not change, stay a fixed frequency? if it changes, how can i get the realtime cpu frequency?if anyone knows,please tell me, thank you so much!!!

As a general, historical statement Tonefox is correct. For certain particular cpus woodmeister is correct. Cpus have historically been single frequency units, though over-clocking has been done for several years. Doing so pushes the cpu beyond its guaranteed speed, but has tended to work since most cpus from quality vendors will actually operate at higher speeds. The manufacturer just does not guarantee the results...remember the Pentium fiasco in the early years of that chip? Today manufacturers are ceertifying particular product lines for over-clocking on a periodic basis. And that is what dynamic clocking really is, over-clocking but not at a constant clock speed as has been done in the past.
Much of the silicon on the market will function at higher clock rates, the only question is does the maker guarantee the accuracy and performance at those clock rates.

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

CS6 Illustrator and InDesign colours are changed when the PDF is saved.

CS6 Illustrator and InDesign colours are changing when the saved PDFs are displayed on some different computers and for digital print output. I have ensured that the colours are all CMYK and tried different adjustments like preserving the numbers and the like but nothing is working. It prints properly on my inkjet and has displayed properly on different computers.

You need to read up on color management, color profiles and all that....
Mylenium

[ReachIt] The sharing files progress bar don't have any changes when share file to another machine

Install ReachIt 2.0.5.2, go to video folder to select a file, select shareit to send the video file to another machine, the progress bar don't have any changes after the file have been sent successfully.

Sender file communication channel polling only when the file is written

Hi guys,
I have the following scenario:
I have developed an XI interface that takes a .txt file from SAP R/3's file system, usr/sap/trans/ and delivers it into another ftp location. The problem that we face is that the file is written into source directory from an ABAP program. As a result, XI go and polls into source directory when the file is not completely written, or when it is empty, which blocks the process.
Is there a way to force XI in order to poll the source directory only when the file is complete?
We have thought of exporting the file into a name that XI does not expect and as soon as the file is complete to rename the file from inside ABAP program into what XI expects.
However, the command inside ABAP changed the Code page of the file and we cannot see some special characters in the file that is delivered to the ftp location.
Any ideas??

Hi Evaggelos,
from <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">SAP help: Configuring the Sender File/FTP Adapter</a>:
Advanced Mode
To specify additional parameters in the adapter configuration, set the Advanced Mode indicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed
Regards,
Udo

How do I split a pdf file when the file size is too large?

How do I split a pdf file when the file size is too large? Thanks!

With Adobe Acrobat. It can also optimize your document to make the size smaller.

Saving a book as PDF takes significantly more time when the file binary *.fm rater than *.mif?

Is it possible, that saving a book (with FrameMaker 10) as PDF takes significantly more time when the file is formatted in the binary *.fm rather than the *.mif format?
We have books (+160p) that take about 20 min to be saved as PDF, whereas the same book in MIF format can be saved as PDF within about 4 minutes. Is this a known issue?
Or could that be a problem with our books?
Does anyone know how to speed up the process (how to tweak) or are there any special adjustments in the books or documents that might slowdown the process of saving them as PDF?
The distiller seems not to be the problem. The distiller takes equally long for both formats.
best regards

Strikes me as peculiar. I would expect that FM is rendering from the data structures in memory, which I would expect to be essentially identical whether originally opened as .fm or .mif.
If return-to-UI time is important, the fastest path is:
print to local .ps file
Distill separately.
And it sounds like you have the full Acrobat product, and thus have full Distiller.
I don't have sufficient experience with Print-to-PDF vs. Save-as-PDF to opine on potential time differences for those paths.

Loading a file when the file is updated

Is their a way to load a file only when their is something changed in the file?

JoVMo wrote:
Is their a way to load a file only when their is something changed in the file?
Well you're going to have to read it in some form or another to see if 'something changed in the file'..
What about storing the old file's size in bytes and using the 'Get File size' function to return the current size of the file in bytes. If there's a difference between your stored value and the current value, then the size of the file has changed.
Of course this will only work if the file's size changes and will not work if your overwriting an existing file with similar data which may contain the same number of bytes.
Maybe you could provide some more details for futher solutions

How to reference a set of Flash-protected f4v files in a manifest when the files are on Cloudfront?

I have: a self-created AMS 5.0 running on Amazon.
Using latest OSMF player.
I'm Using EZDRM for Flash Access protection.
I have a dynamic bitrate f4m created with the F4F packager. It contains data for three bitrates.
I know that my S3 bucket and Cloudfront distribution are generally working because I can play a set of non-drm files using a RTMP-style manifest
I am successfully issuing the license and playing the videos using that manifest when the files are located on the AMS itself.
The working call to the manifest is this: http://media.blah.com/vod/BlahBlah/Blah.f4m
I think the relevant portion of the manifest is this:
streamId="Blah-1000"
url="Blah-1000"
bitrate="1000"
bootstrapInfoId="bootstrap4543"
drmAdditionalHeaderId="drmMetadata8495"
I think the correct way to approach this it to leave the manifest on AMS and manually change the url in the manifest for each video file
I've tried changing the url in the manifest to point to the cloudfront location
http://blahblah.cloudfront.net/cfx/st/mp4:Blah
But I simply get back: "We are unable to connect to the content you requested."
Your guidance greatly appreciated.
Ken Florian

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

MD5 Checksum Changes When Renaming Files in Bridge?

Just like the title says: MD5 checksum seems to be changing when renaming files in Bridge
Is this normal? Is there anyway to disable this? Checksums do not seem to change when renaming a file outside of Bridge (ie; in Windows Explorer or Mac Finder).
Ken
P.S. System is Windows 7 using Bridge CS6 (64bit)

Thanks for the quick reply Curt.
Until you just now asked the question, I could not explain why it should not change. Now, if I understand correctly after googling around a bit, it appears the hash can be computed either with or without the filename (among other things).
Apparently Bridge computes the hash including the filename. It seems there is an option to compute the hash based only on the file contents (ie; without the filename). My assumption was that by default, the checksum was generated using only the files contents (ie; without the filename).
I'm hoping someone can comment definitively on how Adobe Bridge does it and whether or not there's a way to change it.
Ken

Acrobat XI - hyperlink properties is changing when the file is moves

Similar Messages

Maybe you are looking for