Acrobat XI installation failure, with error codes

I've tried but failed to install Acrobat XI twice from Creative Cloud, but the program showed up as installed in Win8 control panel. I uninstalled and tried again, failed, but captured the error codes as follows (hope someone can help):
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Okay, so I've looked at posts with similar issues and error codes and they all seem to point in somewhat different directions and tend to relate to earlier product and OS versions but then I decided to look for the installation files in C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and found the Acrobat.exe file. It successfully launched the application, which appears to have installed properly (still testing that theory). The launch icons appear on the Win8 Start menu and the Control Panel\Programs\Programs and Features indicates the program has been installed. Apparently, the only issue remaining is that the CC App Manager shows the install as failed. Something failed, not sure what but it may have been the final hand-off of the process to CC App Manager. But I'm just guessing.

Similar Messages

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

JDK installation finished with error code -3

I tried to use the installer for netbeans IDE + jdk (jdk-7u21-nb-7_3-windows-i586.exe). All of the netbeans stuff is installed fine, but the jdk part fails, but at least this time it lets me know "Installation of JDK 7 Update 21 was not completed."
The log files just say there is an exception at org.netbeans.installer.utils.exceptions.InstallationException: JDK installation finished with error code -3.
So it has worked fine on my other machine, I am at a loss here. Sorry again that I couldn't figure out where to post this.

I tried to use the installer for netbeans IDE + jdk (jdk-7u21-nb-7_3-windows-i586.exe). All of the netbeans stuff is installed fine, but the jdk part fails, but at least this time it lets me know "Installation of JDK 7 Update 21 was not completed."
The log files just say there is an exception at org.netbeans.installer.utils.exceptions.InstallationException: JDK installation finished with error code -3.
So it has worked fine on my other machine, I am at a loss here. Sorry again that I couldn't figure out where to post this.

Installation failed with error code 1603

Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
Naveed

I have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done

RoboHelp 10.0.1 Update installation fails with error code: U44M2P7

After installing RoboHelp 10, I ran the 10.0.1 Update's installer. It failed with the following error log:
Adobe RoboHelp 10.0.1 Update
Installation failed. Error Code: U44M2P2
I tried re-installing RoboHelp 10, followed by a reboot of the machine. Several attempts to run the 10.0.1 updater gave me exactly the same error. No applications were running when the installation was attempted.
Any help is greatly appreciated!
Layne

Only Adobe can tell the meaning of the error codes.
Are you downloading the update or running it from Adobe's site.
Try downloading from here. http://www.adobe.com/support/robohelp/downloads.html
Otherwise this is an installation problem that is supported free. Contact Adobe.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
using LANDesk to deploy it. All methods are failing.
I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
Microsoft Updates before this one.
When I try Microsoft Update, I receive the following error:
Code B56 Windows Update encountered an unknown error.
Below is the WindowsUpdate.log excerpt:
2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler :: START :: Handler: MSI Install
2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
2013-08-06 12:46:42:265 112 600 Report Uploading 2 events using cached cookie, reporting URL =
http://wsus:8530/ReportingWebService/ReportingWebService.asmx
2013-08-06 12:46:42:358 112 600 Report Reporter successfully uploaded 2 events.
2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
2013-08-06 12:47:52:012 112 938 AU >>## RESUMED ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
2013-08-06 12:47:52:012 112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
2013-08-06 12:47:52:012 3952 dc4 Handler :: END :: Handler: MSI Install
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
2013-08-06 12:47:52:168 112 5c4 Agent *********
2013-08-06 12:47:52:168 112 5c4 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-08-06 12:47:52:168 112 5c4 Agent *************
2013-08-06 12:47:52:168 112 938 AU Install call completed.
2013-08-06 12:47:52:168 112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-08-06 12:47:52:168 112 938 AU #########
2013-08-06 12:47:52:168 112 938 AU ## END ## AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
2013-08-06 12:47:52:168 112 938 AU #############

I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system. Researching the errors I got led me to discover the following:
1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update. Some were able to get it installed by first doing a Repair on Office 210 itself
first, and then installing SP2. But many others have not been able to install it at all.
2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory. This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
during the installation. Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
I am one of those people.
I found a posting that described a way to recreate MSOCACHE from the source CD. I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file. I found the file on the CD and
pointed the installer to it, but it said the file was not found and quit. So my install still failed.
The last response I got at the Microsoft Answers site was to wait until SP2 is debugged. It's not clear to me this will ever happen, but we'll see.
Birk Binnard http://www.birkbinnard.com

EMET 4.0 installation fails with error code 1720

On many, but not all, of our systems (Server 2008 R2), installation of EMET 4.0 is failing. Here is an excerpt from the verbose MSI log:
REM kill EMET Agent 4.0 process if running (re-installing scenario) strAppName = "emet_agent.exe"
Set objProces
MSI (s) (A0:50) [10:55:47:325]: Creating MSIHANDLE (27) of type 790536 for thread 6736 MSI (s) (A0:F0) [10:55:47:325]: Creating MSIHANDLE (28) of type 0 for thread 1520 MSI (s) (A0:38) [10:55:47:325]: Generating random cookie.
MSI (s) (A0:38) [10:55:47:325]: Created Custom Action Server with PID 6588 (0x19BC).
MSI (s) (A0:DC) [10:55:47:434]: Running as a service.
MSI (s) (A0:DC) [10:55:47:434]: Hello, I'm your 32bit Elevated custom action server.
MSI (s) (A0:F0) [10:55:47:512]: Note: 1: 2262 2: Error 3: -2147287038 MSI (c) (C8:B4) [10:55:47:512]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2835: The control ErrorIcon was not found on dialog ErrorDialog The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2835. The arguments are: ErrorIcon,
ErrorDialog, MSI (s) (A0:F0) [10:55:52:223]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A0:F0) [10:55:52:223]: Product: EMET 4.0 -- Error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could
not be run. Contact your support personnel or package vendor. Custom action _FA2E7A16_A819_4F3A_AB7E_0A039BE81BD7 script error -2147024770, : Line 21, Column 1,
MSI (s) (A0:F0) [10:55:52:223]: Closing MSIHANDLE (28) of type 0 for thread 1520 MSI (s) (A0:F0) [10:55:52:223]: Closing MSIHANDLE (27) of type 790536 for thread 6736 Action ended 10:55:52: InstallExecute. Return value 3.

I've just spent the last 6 hours trying to find a solution to this. All the steps provided by other user never worked. Running the script separately worked just fine (and YES I was running it as admin). Basically I've come up with a workaround.
The section it's failing on is a CustomAction(VBSCRIPT) that the MSI is calling to 'look for' & 'close' emet_notifier.exe or emet_agent.exe. I know it's not there because I manually removed EMET. When you modify the MSI you can pull out the CustomActions
piece that is failing.
Step 1: Modify the MSI using Orca. Orca is provided by MS in the SDK Tools. I found this site helpful for getting Orca installed on Windows 7:
http://blogs.technet.com/b/bernhard_frank/archive/2010/03/15/how-to-install-orca-exe-from-the-windows-installer-development-tools.aspx
Step 2: After installing Orca, right click EMET Setup.msi and select 'Edit with Orca'
Step 3: Find all instances of the Custom Action and Drop the Rows: Find > _FA2E7A16_A819_4F3A_AB7E_0A039BE81BD7. (Right Click each row found and select 'Drop Row'. I found 4 Rows with this entry)
File > Save (or Save As) and Run the MSI.
EMET installed without problems. Since it doesn't actually fix the problem with Windows (it only fixes the MSI), you'll have to modify future releases of the MSI the same way for that particular PC.

IE11 installation fails with error code 4007 (USER_ERROR_MISSING_REQUIRED_PREREQUISITE)

Hello there
I'm having troubles with the installation of IE11 on Win7 over software deployment: Some clients fail with the error code 4007:
USER_ERROR_MISSING_REQUIRED_PREREQUISITE
All prerequired updates for IE11 (http://support.microsoft.com/kb/2847882/en)
are approved for installation:
2729094
2731771
2533623
2670838
2786081
2834140
However, KB2731771 will not install on the clients with the status: Not applicable. I think, this might cause the problem and I'm wondering, why this update will not install.
Thank you for your ideas and advise.
Cheers,
Simon

Hi,
For Windows update 2731771, please make sure that you've approved the right version for your clients, x86 package or x64 package.
The error indicates that the failed IE installation is caused by the failed prerequisite, so as
Alex_zz mentioned, we can refer to the ie 11 main log to find more detailed information, you can also locate to
%windir%\logs\cbs
%windir%\Windowsupdate.log
to find the detailed information of the failed update.
Yolanda Zhu
TechNet Community Support

When installing cc desktop app installation fails with error code 1

when trying to install CC desktop app on macbook pro running Lion, the installer downloads the software then says installation failed error code 1 when trying to install the files…help

Signals7 please try the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to install the Creative Cloud Desktop application.

WidgetBrowser installation fail with error code 7 (The storage control blocks were destroyed.)

Client machine is Windows 7 x64.
I am using AdobeApplicationManager tool to extract sources from original Set-up.exe.
Extracted sources contain Build and Exceptions folder. The Build directory contain Dreamweaver.msi and Exceptions contains AdobeHelp and WidgetBrowser sources.
After silent installation of Dreamweaver.msi, i'm tried to install WidgetBrowser but it return error code 7(The storage control blocks were destroyed).
I tried on different windows 7 x64 client but still its not working.
Please help.

Hi,
I have the exact same problem, except I am using 32-bit Windows 7.
Thanks
Rosy_55

DPM Agent Installation Failed with Error code =0x80070643

Hi,
We had an Virtual Machine TFS server 2010 which had SQL server 2008 R2 installed on it.
On this Server we were running an DPM 2010 agent and it was fine.
Then I had uninstalled DPM 2010 agent and try to Install DPM 2012 R2 Agent on this Virtual Machine it gives me error 0x80070643. And for other VM the agent installation is fine.
When I checked on DPM agent logs in Windows/Temp folder it gives me below error.
I had tried with Deleting DPM Registry but still the Problem remains same.
Thanks

Hi,
Earlier the Protected Server had DPM 2010 Agent installed and while Troubleshooting I had already deleted the
HKLM\SOFTWARE\MICROSOFT\Microsoft Data Protection Manager\Setup Registry
And Tried to Reinstall Agent but still it gives same error.
Regards,
Nadeem

Installation failing with error code 1603

[Topic title updated by moderator to be more descriptive. Was: "Please help me"]
i use skype everyday to talk to my friends and it said i need to update a while ago but it doesnt work but i thought that it wouldnt matter and i could still use the older version but now it says i have to use the newer version but it wont let me download it. i go through the update launcher thing up to the point where it says "please wait while skype is being installed. this may take a few minutes" and then a small box pops up saying "installing skype failed; code 1603. a fatal error occurered while installation." i click "ok" and it closes so now i cant use skype so i cant talk to my friends! please help
Solved!
Go to Solution.

Try to clear any currently installed version using this MS Fix It:
http://support.microsoft.com/mats/Program_Install_and_Uninstall/en
If this will still not help, then try this:
http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m-...
Be aware that if you want to install the currently latest 6.18.0.106 version, then you should use this msi-installer link in order to extract the Skype.exe and Login.cab files:
http://download.skype.com/msi/SkypeSetup_6.18.0.106.msi

Secondary DPM backup failure with error code 0x80070002

Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno Martins

Does Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

BACKUP failure with error code sqlcode: -2419 with DB2 and SuSeLinux

Hi,
I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
> SQL2419N The target disk "/dev/st0" has become full row=1
Database error -2419
I have kept the new tape but still getting the same error, My OS is Suse Linux and Database: DB2 9.7 FP4
Please Help me with the solution
Regards.
Raju

Dear Raju,
Check this & set the "fsize" parameter value.
SQL2419N The target disk “disk” has become full.
August 21, 2009
SQL2419N The target disk “disk” has become full.
Explanation:
During the processing of a database utility, the target disk became full. The utility has stopped and the target is deleted.
User Response:
Ensure enough disk space is available for the utility or direct the target to other media, such as tape.
On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid. Use the chuser command to update fsize. A reboot may be necessary.
On non unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the operating system. Direct the target to other media, such as tape, or use multiple targets.

Backup failure with error code sqlcode: -2419 with DB2 and AIX

Hi,
I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
Op Obj Timestamp+Sequence Type Dev Earliest Log Current Log Backup ID
B D 20070603230002001   N    T S0013124.LOG
Contains 39 tablespace(s):
00001 SYSCATSPACE
00002 PSAPEL31GI
00003 PSAPES31GI
00004 PSAPDDICD
00005 PSAPPOOLI
00006 PSAPUSER1I
00007 PSAPCLUD
00008 PSAPSOURCED
00009 PSAPBTABI
00010 PSAPLOADI
00011 PSAPCLUI
00012 PSAPDOCUI
00013 PSAPSTABD
00014 PSAPPROTI
00015 PSAPBTABD
00016 PSAPPROTD
00017 PSAPLOADD
00018 PSAPSOURCEI
00019 PSAPUSER1D
00020 PSAPSTABI
00021 PSAPDOCUD
00022 PSAPPOOLD
00023 PSAPDDICI
00024 PSAPES46BD
00025 PSAPES46BI
00026 PSAPEL46BD
00027 PSAPEL46BI
00028 SYSTOOLSPACE
00029 PSAPDIMD
00030 PSAPDIMI
00031 PSAPODSD
00032 PSAPODSI
00033 PSAPFACTD
00034 PSAPFACTI
00035 PSAPPEL640D
00036 PSAPES640D
00037 PSAPEL640D
00038 ZSAPBTABD
00039 ZSAPBTABI
    Comment: DB2 BACKUP PRD ONLINE
Start Time: 20070603230002
   End Time: 20070604050110
     Status: A
EID: 40823 Location: /dev/rmt1
SQLCA Information
sqlcaid : SQLCA     sqlcabc: 136   sqlcode: -2419   sqlerrml: 9
sqlerrmc: /dev/rmt1
sqlerrp : sqlubMWR
sqlerrd : (1) 0                (2) 0                (3) 0
           (4) 0                (5) 0                (6) 0
sqlwarn : (1)      (2)      (3)      (4)        (5)       (6)
           (7)      (8)      (9)      (10)       (11)
sqlstate:
can i know what is this

Hello,
that's what db2 ? tray to say:
db2 '? sql2419'
SQL2419N The target disk "" has become full.
Explanation:
During the processing of a database utility, the target disk
became full. The utility has stopped and the target is
deleted.
User Response:
Ensure enough disk space is available for the utility or direct
the target to other media, such as tape.
On unix-based systems, this disk full condition may be due to
exceeding the maximum file size allowed for the current userid.
Use the chuser command to update fsize. A reboot may be
necessary.
On non unix-based systems, this disk full condition may be due
to exceeding the maximum file size allowed for the operating
system. Direct the target to other media, such as tape, or use
multiple targets.
I hope this is helpful for you.
Best regards,
Joachim Müller

Acrobat XI installation failure, with error codes

Similar Messages

Maybe you are looking for