Acrobat XI: Printing to networked printer fails without error message

I'm using Windows 8 Professional.
When I use Acrobat XI Professional or Reader XI to print to a networked printer, Acrobat and Reader throw up the Progress dialog, showing the document is getting spooled. However, nothing appears in my printer's status window and nothing gets printed. There are no error messages.
When I use Windows 8 Pro's Reader app to print to the networked printer, it works just fine.
I thus have a workaround, so not all is lost.
However, how do I diagnose why only the Adobe applications on my computer can't use the networked printer?
-- Tim
Timothy J. McGowan

Thanks for the advice.
The problem is not solved. This is what i have tried.
Attempt 1.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
"Repair" Adobe Acrobat XI Pro installation.
Same failure as described earlier.
Attempt 2.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Uninstall Acro XI Pro.
Run : acrobat_ittools_cleaner_p1_040612.zip
Log of "cleaner" shows deletion of very many, but ot all, Registry Acro-associated keys.
At end of uninstall and cleaner processes, re-start machine.
Log-in again as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Disable Norton 360 and Webroot Secure Anywhere prior to Acro XI Pro installation.
Re-install Acro XI Pro (this time, for "Default" choice, as opposed to "Complete" in previous installs.)
Outcome: NO Adobe PDF printer. HOWEVER, both during the "Repair" and re-install processes, a message did flash: "Creating the Adobe PDF Printer".
Both Repair and re-install: The Adobe PDF printer is not listed under "Manufacturer" when "Add Printer" is executed (see image below).
Proceeding via "Have Disk", C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf, yields the failure to install the driver previously described, for all ten (10) instance of the Adobe PDF Converter options.
Thanks for any insights.

Similar Messages

Install fails without error message

I see a few other threads with installation failures, but none match my symptoms. I have 64-bit CS5 Extended on Windows 7.
I downloaded pixelbenderplugin_p2_64bit_090910.mxp and executed it to install.This brought up the CS5 Extension Manager as expected, but then nothing happened. There is no sign of Pixel Bender when I select either Photoshop product from EM's list of products. There is no error message that I can see.Just to make sure it wasn't actually installed, I verified that the Photoshop Filter menu does not show a Pixel Bender item.
I also tried opening the mxp using Extension Manager's File/Install Extension menu. Same effect. It seems to open the file but doesn't do anything with it.
How should I diagnose this problem?
Thanks!

I don't think there's anything really unusual about my installation. Maybe a few extra add-ins, but nothing really weird as far as I know. I keep it all updated. I also use Avast Antivirus and Spybot Search and Destroy, both of which are up-to-date.
My Firefox is version 3.6.10, running on 64-bit Windows 7.
"Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10"
Extensions:
BetterPrivacy 1.48.3
CookieSafe 3.0.5
Flash and Video Download 0.1
Java Console 6.0.20
Java Console 6.0.21
Web Developer 1.1.8
Add-ons:
Wacom Dynamic Link Library 1.1.0.3
Adobe Acrobat 9.3.4.218
DivX Player Netscape Plugin 6.1.0.0
DivX Web Player 2.0.3.4
Google Talk Plugin 1.4.2.0
Google Talk Plugin Video Accelerator 0.1.43.3
iTunes Application Detector 1.0.1.1
Java Deployment Toolkit 6.0.210.7
Java(TM) Platform SE 6 U21 6.0.210.7
Microsoft Office 2010 14.0.4730.1010
Microsoft Windows Media Player Firefox Plugin 1.0.0.8
Mozilla Default Plug-in 1.0.0.15
Musicnotes 1.18.4.0
QuickTime Plug-in 7.6.8.0
ScorchPlugin 6.1.5.22
Shockwave Flash 10.1.82.76
Silverlight Plug-In 4.0.50917.0
Windows Genuine Advantage 1.9.42.0

Connection to X fails without error messages

Hi all,
I'm having serious problems with a newly installed arch. I'm setting up a laptop for a friend with pretty much the same configurations as I have myself- except that I didn't have this problem.
I installed X, KDE, made configurations, started KDE customized things, logged out and couldn't log back in. The splash screen won't pass "initializing system services". These are the steps I've taken in order to troubleshoot:
1) I created a new user in order eliminate setting-issues with one particular user.
2) I've tried running startx instead of KDE, of course. I get a cursor and then I'm instantly returned to console. This reminds me much of problems with pseudo terminals, especially since kdm starts fine. But..
3) I've checked that I have /dev/pts mounted
4) /dev/null has the appropriate permission
The worst thing is that when I'm returned to console, I don't get any error messages. Neither can I spot anything with "cat /var/log/Xorg.0.log | grep EE" or "cat /var/log/Xorg.0.log | grep WW". Dmesg doesn't yield anything either.
I'm really clueless here. Any ideas?
(I use udev, by the way)

OK; this is so crazy, I can only laugh. Nothing like this ever happened me before: Before trying your suggestions, I tried startx one more time, and for some reason it worked. So I decided to restart the computer and see what happens. When system was back up, I couldn't even start kdm. I took a look around and it turned out there was no "X" in my paths. Weird, since echo $PATH clearly showed /usr/X11R6/bin. So, I try to chdir to /usr/X11R6/bin, but I got permission denied, as root! I can't even run "ls /usr/X11R6" without getting permission denied. ls shows the other two dirs there, but not bin. That's just so weird. And I can't reinstall Xorg, cause that requires write permissions to those dirs...

TM fails without error message

After about 7 GB of 57 GB I find TM has stopped but without any error messages. I have used disk utility to re-format my LaCie HDD but same result. Then excluded all folders other than Pictures and OK. But I want to back-up everything. Any ideas....thanks.

as I said two times already, I am using Windows 2012R2. Also, as I mentioned in my previous post, a non-standard multiplicator seems to have been the reason for the fault.
Is this an answer to my question, or did you by mistake reply in the wrong thread?
What is an "always" block?
I am using genereate statements regularly, usually with the size of up to 32, since it is a design with 32 parallel ADC channels.
Also, the machine on which it initially didn't work has 32GB RAM, while my small notebook on which it worked has 6GB RAM. I think it is unlikely that memory is the cause. The memory recommendation according to your link is below 4GB for XC7K160T.
As far as I can see, there is no answer record 59931: http://www.xilinx.com/support/answers/59931.html
Since the problem seems to have been on the systems hardware side (non-default CPU multiplicator), I will close this thread. If I encounter a similar problem again, I now know the appropriate steps to take before opening a thread.
Thanks again,
Johannes

Inserts Fail without Error Message

I have a Java program which uses a Connection and Statement to insert records into the database. It has been working great. The last couple of days it has been failing, and no Exceptions are returned. I tried increasing the tablespace and it still randomly fails.
Suggestions?
try {
     conn = DBUtil.getConnection();
     s = conn.createStatement();
     res = s.executeUpdate(insertValue.toString());
} catch (SQLException e)
throw new SQLException("SQL Error in: " + e.toString() + " " +insertValue.toString());
} catch (Exception e)
throw new Exception("Error in: " + e.toString() + " " +insertValue.toString());
}//catch

Same thing happened to me. I called Apple and got some advice that worked. Make sure iDVD is not open at the time and be prepared to shutdown your computer after applying the following:
1. Go to the your User>Library>Preferences folder. Find the file: com.apple.iDVD.plist and move it to your desktop.
2. Go to the User>Library>Caches folder. Find the folder com.apple.iDVD and move it to your desktop. (These files will get recreated upon reopening iDVD, so they really aren't that important, but putting them on the desktop will allow you to reference them if need be)
3. Then you shutdown your computer in order to rebuild the power settings.
4. Unplug your computer from the power cord. Remove your battery. Then hold down the power button for 5 seconds
5. Put the battery back in, plug back in the computer and turn back on the power
6. Try burning your project again.
This worked for me and the whole burn process went MUCH faster that before (meaning all the preceding rendering and preparation steps before the actual burn step also went much faster).
Hope the same solution works for you!

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
I am changing the set up of my home computer to add another computer.
I would like to go wireless from my computers to the hub and wired from the hub to my
printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
I am rather new to this way of setting up, so any help would be nice.

You could get a wireless router that supports USB printers, but these only support printing, not scanning. You could just go buy a new wireless printer since your printer is pretty old, anyway.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How To Print To Network Printer

I want to know how to print to network printer which is connected to Windows 7 PC.

D2KWUTIL is a PLL developed by Duncan Mills (who's name you ought to recognise from this forum). It provide's lots of useful functions for enhancing Forms in a Windows environment. You can download it from here: http://technet.oracle.com/software/products/forms/content.html
Cheers, APC

Successfully downloaded and installed Adobe Reader on my PC ... ( Windows 7 home premium (64 bit) OS). Cannot print adobe documents... Error message indicates need to install plug-in for adobe reader for windows 7 home premium (64 bit) OS

Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
Please advise how/where to locate the required adobe reader plug-in...
Thank you,
Joe Curcio

What is the full and exact message you are getting?
If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

IPhoto 08 vsn 7.1.5 software issue. Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
Papasailor

YOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

I am able to print but cannot scan as the error message shown is that 3510 series is not found.

I am able to print but cannot scan as the error message shown is that 3510 series is not found.
Rgds,
Sanjay

Hi VijayAhuja,
Welcome to the HP Support Forums! I see you are able to print but when you attempt a scan on your HP Deskjet 3510 you get an error message saying the 3510 series is not found.
I would first like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What did the PSDR find, are you now able to scan with your DJ 3510? If you are still not able to scan please leave me with the following information:
1. How do you have the printer connected, USB or Wireless?
2. What is you current Operating system?
3. Do you have any anti virus programs running, Norton or McAfee, please disable and retry the scan?
I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

CJS-00084 SQL Statement or Script failed. Error Message: Executable

Hello
Hello
I am facing one problem at the time of installing 4.7 IDES can you please guide me on that. Do I need to reinstall system ageing or it can be sort it out in this stage.
ERROR AT THE TIME OF INSTALLING SAP 4.7 IDES ARE
1. CJS-00084 SQL Statement or Script failed. Error Message: Executable
C:\oracle\ora92/bin/sqlplus.exe returns 3.
2. FJS-00012 Error when executing script.
Complete error log :--
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:29
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:29
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:37
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:37
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:51
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:51
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:07:00
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (C:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2000-06-15 21:07:00
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:07:00
MDB-06030 A call to the system library failed. System error message: [No such file or directory].
ERROR 2000-06-15 21:07:00
MUT-02011 Internal error: A call to syslib failed. System error message: No such file or directory.
ERROR 2000-06-15 21:07:00
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:11:52
Error 1326 (Logon failure: unknown user name or bad password.
) in execution of a 'LogonUser' function, line (537), with parameter (SAPTRANSHOST\godadm).
ERROR 2000-06-15 21:11:52
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:11:52
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2000-06-15 21:11:52
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2000-06-15 21:11:52
FJS-00012 Error when executing script.
INFO 2000-06-15 21:11:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:11:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:11:54
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:11:54
FJS-00012 Error when executing script.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:13:42
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:13:42
FJS-00012 Error when executing script.
INFO 2000-06-16 02:00:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:00:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:00:07
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:00:07
FJS-00012 Error when executing script.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:08:18
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:08:18
FJS-00012 Error when executing script.
INFO 2000-06-16 02:09:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:09:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:09:49
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:09:49
FJS-00012 Error when executing script.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:14:33
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:14:33
FJS-00012 Error when executing script.

> WARNING 2000-06-15 21:07:00
> Error 2 (The system cannot find the file specified.
> ) in execution of a 'CreateProcess' function, line
> (276), with parameter
> (C:\oracle\ora92/bin/sqlplus.exe /NOLOG
> @ora_scr_tmp.sql).
> ERROR 2000-06-15 21:07:00
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
> ERROR 2000-06-15 21:07:00
> MDB-06030 A call to the system library failed.
> System error message: [No such file or directory].
> ERROR 2000-06-15 21:07:00
> MUT-02011 Internal error: A call to syslib failed.
> System error message: No such file or directory.
> ERROR 2000-06-15 21:07:00
> FJS-00012 Error when executing script.
> WARNING 2000-06-15 21:11:52
> Error 1326 (Logon failure: unknown user name or bad
> password.
> ) in execution of a 'LogonUser' function, line (537),
> with parameter (SAPTRANSHOST\godadm).
> ERROR 2000-06-15 21:11:52
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
is that file there (sqlplus)?
as which user are you installing?
Markus

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank you

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank yo

Try power-cycling your wireless router (unplg for 30 seconds, plug back in). Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

Acrobat XI: Printing to networked printer fails without error message

Similar Messages

Maybe you are looking for