Acrobat XI Pro crashes Office 2007 Powerpoint when converting to pdf

I have a Dell laptop with Windows 7 x64 and Office 2007.  I also have Acrobat XI Pro.  When I convert a .ppt powerpoint file to .pdf, powerpoint stops working. 
When I click Convert to pdf, Acrobat prepares the slides and then begins publishing and about 1/4 of the way through I get a message that powerpoint has stopped working.
I have run the Office Diagnostics and it found nothing.
I have reinstalled Acrobat and it didn't help
Is there a compatibility issue?  Would an older version of Acrobat Pro work such as Acrobat 9 or 10?
Is there an Acrobat Preference that I could change that would solve the problem?
Thanks
Tracy

Thank you, it actually turned out to be the specific document, other
powerpoints converted without error.
Thanks, and Have a Great Day,
Scott Halet
<http://www.linkedin.com/pub/scott-halet-mba/7/727/740>
http://www.linkedin.com/pub/scott-halet-mba/7/727/740

Similar Messages

  • Acrobat 8 Pro and Office 2007 Problem

    I posted this in the CS3 forum originally. They told me to post here too.
    Issue:
    When logged in as a local user (no admin rights) Word 2007 will crash the whole computer when you type a key.
    The reason I am posting on Adobe forums is that this only happens when CS3 is installed as well on the same computer.
    Troubleshooting:
    Both products work fine as a local user account, if only one or the other are installed.
    During login, Acrobat Pro will display a MSI/Installer progress bar for about 30secs. After I updated Acrobat to 8.1.3, that stops, but the Word crashing problem doesn't.
    When starting Office, setup runs everytime. It shows just a progress bar and goes for about 1min.
    On a doc, if I wait about 5min and don't do anything. A MSI install progress bar will run for "MS Office 2007 Pro", this will re-spawn for several mins. until it finally stops. After that, Word IS usable.
    No other problems with CS3.
    Fully updated both CS3 and Office 2007
    This could very well be an Office issue, but it is associated with CS3 also being installed on the same computer.
    Any help would be great!

    Forgot again! Using XP Pro sp2 and sp3.

  • Acrobat 9 Pro and Office 2007 - Incompatibility??

    I have been reading comments on other forums about a compatibility issues between these two softwares. See Amazon product feedback reviews on Acrobat 9 Pro for example.
    Is this a issue users here are experiencing?.

    Some of what I saw was someone coming to AA9 from AA5. For OFFICE 2007 he had no choice if he wanted the PDF Maker functionality. There is likely an issue, possibly with either AA9 or OFFICE not being updated. Being sure you are up to date is important. Currently AA9 appears to have no updates, only an add-on. However, it may be that OFFICE 2007 has updates, in fact likely. The bottom line is that the complaints did not provide enough information to see if it was an AA9 problem, MS problem, or a user problem. Enough folks seem to have survived the transition successfully, it is a good chance that the latter problem may be the issue in that forum.
    The comment on support is not new in concept. That has been a complaint for as long as I can remember with past versions too. I think it was with AA5 that I started coming to the forum, and that was the move that saved me a lot of time and frustration (other than I now spend a lot of time on the forum).
    For comments about compatibility, I would search this forum and see what others have had problems with and the solutions that have been suggested. I think you will get a much better feel for the compatibility. Two of the comments on the link praised the software.

  • Adobe Acrobat XI and Visio 2013 Freezing up when converting to PDF

    I have been having issues with adobe acrobat XI and Visio Pro 2013 x64. The program freezes when converting a visio document to pdf. It doesnt happen with Visio Premium 2010 x64. Has anyone else experienced this problem?
    Failed Configuration
    Visio 2013 - x64
    Adobe Acrobat XI 11.0.10
    Working Configuration
    Visio 2010 - x64
    Adobe Acrobat XI 11.0.10
    I have tried many steps - see below
    -Reinstall adobe
    -Updated adobe
    -Reinstall visio 2013 x64
    -Test conversion with different documents - works sometimes, fails most times
    -Convert visio to x86
    -No adobe x64 solution
    Any help on this would be greatly appreciated.
    Thanks!

    Thank you, it actually turned out to be the specific document, other
    powerpoints converted without error.
    Thanks, and Have a Great Day,
    Scott Halet
    <http://www.linkedin.com/pub/scott-halet-mba/7/727/740>
    http://www.linkedin.com/pub/scott-halet-mba/7/727/740

  • SLOW PRINTING to Acrobat 8 Pro from Office 2007 on OS Win 7 Pro after updating to 2.0-2.3 ...???

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

  • Acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date

    acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date.
    Has anybody else seen this problem? Is there a fix?
    I wanted to download the demo of acrobat XI but it says the previous version will be removed and deactivate the license. That sucks!

    Yes it is up to date.
    I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten.

  • Acrobat XI Pro crashes when saving as a reduced size PDF in version 11.0.07

    Since upgrading to the v 11.0.7 update, Acrobat XI Pro crashes every time I try to "save as" a reduced size PDF.  I have tried several different settings, but still crashes.

    You might try to setup the page size in the Adobe PDF printer and then print to the printer. I assume you are using PDF Maker (create PDF) and that may be the problem. You might also open the preferences in PDF Maker and turn off most of the options - none should be needed for a single page since you would likely not be using transitions, bookmarks, etc.
    Just as a test, you may want to just start with printing ot the Adobe PDF printer, but you will likely get the default paper size with the PPT shrunk to fit.

  • My adobe acrobat XI Pro has been constantly freezing when I open documents.

    My adobe acrobat XI Pro has been constantly freezing when I open documents. I've uninstalled and reinstalled the program, changed some settings based on community threads, nothing is working. I have to close the document, open it back up and wait at least 60 seconds before I can do anything. I use Adobe pdfs for everything this is very bad. I am using MS Office 365, and Adobe CC on Windows 8.1.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • Acrobat X Pro Crashes on Yosemite

    I upgraded to OSX Yosemite and now my Acrobat X Pro crashes if I try to save or print.  I am on 10.1.13 and a MacBook Air Mid-2012.  Is there a bug fix pending?  I cannot undo my OS upgrade, or I would.

    Hi Kennith ,
    Does it crashes when you try to print any of the PDF or happens with any specific PDF?
    Are you trying to print with a conventional printer or the Adobe Printer ?
    Refer to this link and see if it helps.
    http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/internet-explorer-crashes-when-i -try-to-print-with/50203e4e-5a0f-4610-a9ba-577ba07c9953
    Regards
    Sukrit Dhingra

  • Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
    Forms Central forms do not support all the features of Acrobat forms.
    Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field.

  • My Acrobat 9 pro crashed on my PC using XP.  I deleted it and tried to reinstall.  It asked for my license for 9, 7 and 6.  I put in the 9

    My Acrobat 9 pro crashed on my PC using XP.  I deleted it and tried to reinstall.  It asked for my license for 9, 7 and 6.  I put in the 9 & 7 license which I have.  How do I get the version 6 license.  Is there a live person at Adobe & how do I reach them??

    You have the upgrade serial number for Acrobat 9that is why it is asking the previous qualifying serial number, I am sending you the serial number of Acrobat 6 & 7 by private messaging, you can your self find them by using Find your serial number quickly
    Regards
    Rajshree

  • How to Open DOC in Office 2003 and DOCX on Office 2007 automatcally when both installed on same pc

    How to Open .DOC file in Office 2003 and .DOCX on Office 2007 automatcally when both office 2003 and 2007 are installed on same pc
    When tried with open with files automatically open in 2007.

    Presumably you've confirmed that both copies of Word are working alongside each other, and if you right click on a document you see both options listed in the Open With menu?
    If so the first thing to try is to right click on a .doc file, go to the Open With menu and then click "Choose default program". If both versions of Word are listed then simply choose Word 2003, ensuring the option to always use this choice is selected.
    If you find that both options are listed as "Microsoft Word" with no version number, or only one is listed, then select the more options entry and then at the bottom of the list select to find another app on the PC. You can then navigate to the Word 2003 executable
    and select it that way.
    Alternatively, search in the start menu for "associations" and you'll find an option to change the file type associated with a file extension. Open that and you'll get a list of every extension known to Windows, and within that you'll find .doc and .docx
    listed, and you can change which application each is associated to.

  • Acrobat X Pro - I need to export a multiple page pdf into a powerpoint presentation - no editing ability needed

    Acrobat X Pro - I need to export a multiple page pdf into a powerpoint presentation - no editing ability needed

    Then you need to upgrade to Acrobat XI Pro, which you can do from the Adobe Products Page.

  • Acrobat XI Pro crash on scan option

    Acrobat XI Pro crash on scan option. Win7 os

    I have just the forum for you
    http://forums.adobe.com/community/acrobat/scanning_%26_ocr

  • Acrobat x pro crash after installation and running it, exit code 16,

    Acrobat x pro crash after installation exit code 16
    I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
    Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
    Error code shutdown 16
    I’m using window 7 ultimate 32-bit service Pack 1.
    I uninstalled also the adobe reader but with no hope,
    If anyone can support me with this issue I will be grateful.

    Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
    http://forums.adobe.com/message/4648705
    Also, try running the below Microsoft fixit and check if that works.
    http://go.microsoft.com/?linkid=9708107
    If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
    [Moved the discussion to Acrobat Installation & Update Issues Forum]

Maybe you are looking for

  • HOW DO I ADD BOOKS TO MY IPOD NANO?  I PURCHASED SOME AND CAN'T GET THEM ON MY NANO

    How do I add books that I have purchased to my Ipod nano?

  • Query on SALES RETURN PROCESS

    Hi All, Scenario : Sales return domestic. 1) I have created Return sales order with reference to Invoice number 2) Have generated Return Delivery 3) Have generated the Invoive. Now when I check the MB52 report  value appears as "Zero" under value unr

  • Individual purchase order with subcontracting material

    Hi all, I've implemented a individual purchase order in a sale order by means of 'TAB' category item. The material has been set as 'subcontracting'. When I create the sale order, a purchase requisition is automatically created with M imputation and s

  • BPA Suite 11g Installation halts at Step 10

    Hello, I have downloaded BPA Suite 11G from OTN. The installation of BPA suite halts at step 10. No error occures. I was waiting for 10-15 minutes to finish the installation. I am using 11G data base installed along with R12.1 on the virtual machine.

  • Need help on data Conversion

    Hi Gurus, Please help me with process and validations in following conversions. Sub Inventory conversion Hr Locations conversion. I am working on R12 implementation project. Thanks in advance. GVK.