Acrobat XI Pro crashes when saving as a reduced size PDF in version 11.0.07
Since upgrading to the v 11.0.7 update, Acrobat XI Pro crashes every time I try to "save as" a reduced size PDF. I have tried several different settings, but still crashes.
You might try to setup the page size in the Adobe PDF printer and then print to the printer. I assume you are using PDF Maker (create PDF) and that may be the problem. You might also open the preferences in PDF Maker and turn off most of the options - none should be needed for a single page since you would likely not be using transitions, bookmarks, etc.
Just as a test, you may want to just start with printing ot the Adobe PDF printer, but you will likely get the default paper size with the PPT shrunk to fit.
Similar Messages
-
Acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date
acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date.
Has anybody else seen this problem? Is there a fix?
I wanted to download the demo of acrobat XI but it says the previous version will be removed and deactivate the license. That sucks!Yes it is up to date.
I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten. -
Acrobat X Pro- crashing when saving
Hello,
I'm trying to use Adobe Acrobat X Pro to edit a large pdf. I can make the edits in the document, but whenever I try to save, the system crashes and all changes are lost unless I'm lucky enough to have the document recovered from the crash. Any known fixes? Thanks!Hi,
May I know the operating system you are using and version?
Have you opened the PDF file from a shared drive?
Are you facing issues with a particular PDF file or all the PDF files? -
Acrobat X Pro crashes when document closed if launched from COM API
Environment: Windows 7
Acrobat X Pro
I'm seeing some unusual behaviour when running the following code which simply launches the Acrobat Application and opens up a document with Acrobat X Pro. Closing the document causes the program to become unresponsive and then crash. The crash dump shows the exception as "The thread tried to read from or write to a virtual address for which it does not have the appropriate access".
I've discounted a problem with the plugin I wrote since the program also crashes without the plugin loaded.
Same code runs fine with Acrobat 9 using the version 9 acrobat.tlb.
Can anyone help or advise?
With thanks,
Evan
HRESULT hr = E_FAIL;
VARIANT_BOOL bRet;
try
::CoInitialize(0);
CComPtr<Adobe10::Acrobat::CAcroApp> pApp;
CComPtr<Adobe10::Acrobat::CAcroPDDoc> pDoc;
CComPtr<Adobe10::Acrobat::CAcroAVDoc> pAVDoc;
CComPtr<IDispatch> pDisp;
CComPtr<IUnknown> pUnk;
CComPtr<IUnknown> pUnk_App;
if (SUCCEEDED(hr = ::CoCreateInstance(__uuidof(Adobe10::Acrobat::AcroApp), 0, CLSCTX_ALL, IID_IUnknown, (void**)&pUnk_App))){
hr = OleRun(pUnk_App);
if (SUCCEEDED(hr)){
hr = pUnk_App->QueryInterface(&pApp);
if (SUCCEEDED(hr)){
pApp->Show(&bRet);
else
return hr;}
if (SUCCEEDED(hr = ::CoCreateInstance(__uuidof(Adobe10::Acrobat::AcroPDDoc), 0, CLSCTX_ALL, IID_IUnknown, (void**)&pUnk))){
hr = OleRun(pUnk);
if (SUCCEEDED(hr)){
hr = pUnk->QueryInterface(&pDoc);
if (SUCCEEDED(hr)){
hr = pDoc->Open((BSTR)CComBSTR(strPath), &bRet);
if (bReadOnly == VARIANT_TRUE){
pDoc->SetInfo((BSTR)CComBSTR(
"ReadOnly"), (BSTR)CComBSTR("yes"), &bRet);}
hr = pDoc->OpenAVDoc((BSTR)CComBSTR(strPath), &pDisp);
if (SUCCEEDED(hr)){
HWND hwnd= ::FindWindowW(_T(
"AcrobatSDIWindow"), NULL);
if (hwnd)ForceForegroundWindow(hwnd);
catch(const std::wstring& s){
EC_TRACE(LVL_ERROR, s.c_str());
if (hr == S_OK)hr = E_FAIL;
return hr;Problem solved. Evidently, the lead document in the file was corrupt. I recreated the file and it compressed without any problems.
-
Acrobat X Pro crashes when I try to scan
I recently upgraded my computer to Windows 7 (32-bit). I used to have Acrobat Pro 6 when I was running WinXP, but I knew that wouldn't be compatable with Win7, so I went out and got Acrobat X Pro.
My scanner is part of my multifunction device: Samsung SCX-4720F
Acrobat X Pro installed fine, as did my scanner driver. When I attempt to Create a PDF from my scanner, Acrobat X crashes every time.
I've searched the web for the problem, and have seen posts by lots of other people who have the same or similar problem with Acrobe Pro 9 using Samsung scanners, but I found no solution. Haven't seen any posts about it for Acrobat X Pro yet, but I know it hasn't been out all that long.
My scanner works fine. I have used it with Omnipage Pro 17 with no problems.
Anyone have any ideas?Hi
The crash seems to be happening because of DEP (Data execution prevention) on Win 7. The issue happens when Acrobat tries to communicate with scanner drivers which are not DEP compliant. It seems Samsung driver is not DEP compliant. To verify the same you can turn OFF DEP on Win 7, although it is not recommended.
To turn off DEP follow the steps mentioned below:
- In the Start Menu, navigate to All Programs, thenAccessories.
- In the Accessories menu, right click on “Command Prompt” and select “Run as administrator.“
- You may need to provide Administrator credentials at this point.
- In the Command Prompt window, type “bcdedit.exe /set {current} nx AlwaysOff” and press Enter.
- You should see “The operation completed successfully.“
- Close the Command Prompt.
- You must then reboot your computer.
Turning DEP is not recommended, so please raise this issue with Samsung also. Let us know if these steps help.
-Ravish -
Acrobat 9 pro crashes when trying to distribute
win xp sp3
acrobat 9 pro
new-ish to acrobat
I have an interactive form, created in acrobat 9 pro. Every time I try to distribute it (forms > distribute form > manually collect responses in my email inbox > save a local copy and manualy send it later > finish) it crashes & I get an error message: "AppName: acrobat.exe, AppVer: 9.5.2.295, ModName: acrobat.dll, ModVer: 9.5.2.295, Offset: 00604f17"
The really odd thing here is that it only does this if I try to save it over the network. If I open the form from/save to a local drive e.g. the desktop or a thumb drive it works fine.
Anyone got any idea what's going on & what to do about it?
TIAThere was an update this last week, taking the current version to 9.3.2. The early versions often have little bugs like you describe, so an update is the first thing to try. If you download the updates from Adobe.com (the downloads>updates page), be sure to download all of them and then install them in order. If you use the updates under help, you can usually update the lowest number one they show and return for any further updates.
-
Acrobat X Pro crashes when I open Output Preview
I'm trialling Acrobat X Pro on Windows 7 Home Premium 32bit (why is the trial not available for Mac?) and every time I open Output Preview in a 6 colour file, with a Hexachrome Output Intent, the whole application crashes? This used to happen in v9 but I thought it had been fixed in X.
Does anyone know how to fix this?Have you updated to the latest point update for Acrobat - 10.1.3?
-
Acrobat 8 Pro crashes when customizing toolbars
Good day,
i am using Adobe Acrobat 8.1.2 on Mac OS 10.4.11, and am having some trouble trying to customize my toolbars. i can easily choose which toolbars i want to show up docked into each document, but when i go to "Customize Toolbars" under the tools menu, and start adding or removing specific tools, it allows me to do it only until i try to quit the application, at which time i get the dreaded dialog box "The application Acrobat quit unexpectedly". it doesnt matter which tool i choose, or how many or few, if i change even one tool, it will crash when i try to quit the app, and it does not hold onto the changes.
anyone else have this issue, or any ideas on how to eliminate it? i would love to get rid of a lot of the tools i never use from my tool bars.
thanks
crI can customize the toolbars without problem. I'd suggest looking for a
corrupt preference file or perhaps one with the wrong permissions. As to
the old way of handling tools, I can detach the tools from the document
window. Just drag them off or on if you prefer them there.
Mike -
Acrobat 8.x crashes when saving as PS in WinXP
I'm having a problem with some PDFs when I try to save them as a postscript file. Acrobat Pro 8 (8.0, 8.1, 8.1.2, all of it) crashes.
It does not occur on all PDF, but it is repeatable on certain "deadly" PDF files. Oddly, the PS file is created and appears to be complete. The crash occurs after the file is written, but before the 'saving' status window goes away.
This did not used to happen -- some PDFs would throw an error in Acrobat, but Acrobat didn't ever crash because of it.
I re-installed Acrobat back to 8.0 (after uninstalling entire CS3 Design package) and it still happened. I removed any recently added fonts and it still happened. System is Windows XP 32-bit with all the latest MS updates. Also happens on a similarly set up laptop.
I'm leaning towards either a windows update or hotfix that broke something because even older versions of acrobat known to work in the past now crash.
I'm also considering a possible video driver issue, as both the workstation and the laptop have NVidia graphics drivers, though each computer has wildly different versions of the NVidia driver package.
I do this in a batch process through Acrobat Pro, but it also happens when I directly open only the offending PDF and save as Postscript. A few months ago when I needed to run a batch like this, I ended up doing it on a Mac machine and it ran no problems. Again evidence towards a Windows issue.
Is anyone else experiencing a problem like this? Any more suggestions short of reinstalling windows (what a pain that would be -- I would be unable to do my job for a whole day or three.)?on 4/28/2008 12:35 [email protected] said the following:
> Have you found a solution? I'm having a similar problem - I use a batch
> sequence to convert pdf's to ps and re-distill. This worked perfectly on
> XP with Acrobat 7, but I now have Vista with Acrobat 8 and it crashes on
> the first file every time. The error message fingered Pitstop.api as the
> culprit. Enfocus is trying to help, but I was interested in your comment
> about fonts. Incidently, I have to do this because these pdf's are
> incompatible with IDCS3. Any help greatly appreciated.
Vicki,
As I said, I didn't really find a solution. My computer died and I had to
reinstall the operating system and the Adobe software. I also reinstalled
Pitstop Pro, so I know that is also not the cause.
I am thinking that I may have had a corrupt font installed in my system and
when Acrobat was saving as PS, it was reading that font to embed it (as I
have my PDF to PS settings set to include all fonts) and promptly crashing.
I have not verified this, but as far as I can tell, all Acrobat-related
software has been reinstalled just as before, except all of my fonts.
I use Acrobat 8 on XP. I don't use Vista, so I can't comment there.
-Lance -
Adobe Acrobat 9 Pro Crashes When Scanning with Canon DR-4010C Native Interface
When doing a custom scan in Adobe Acrobat Pro 9.2, I need to be able to show the Canon DR-4010C native interface so that it will auto-crop when I am scanning small documents such as receipts, etc. I have another model scanner that does it automatically (a Canon Dr-2510C) but I need that same functionality when I scan with the 4010. I can see the setting when I configure Adobe to use the scanner's native interface however when I choose "auto detection" on the size (in the scanner's interface) and press scan, Adobe immediately crashes. Please help!
Also, your log says: Acrobat.exe, version: 9.0.0.332
Looks like you have not updated Acrobat after install. The current version is 9.4.6. Also try updating Acrobat, Help->Check for updates -
Acrobat 9 Pro Crashes When Scanning Sets of Documents
I am supporting a user at my site who is running a Windows 7 Pro machine (32 bit) with Adobe Acrobat Pro 9 with all latest updates applied. She is continually having an issue when converting sets of scanned documents to PDF. She is prompted that Adobe Acrobat Pro has stopped working and crashes out. It does not exhibit this behavior on individual scans or smaller batches of documents. She seems to be encountering this issue when she tries to process, for example, a batch of 15 pages or more.
Here is what is being generated in event logs:
Log Name: Application
Source: Application Error
Date: 9/20/2011 11:52:42 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: MAWSS6777.mawss.com
Description:
Faulting application name: Acrobat.exe, version: 9.0.0.332, time stamp: 0x4850eb76
Faulting module name: OCRLibraryInf.dll, version: 2.0.0.1, time stamp: 0x4850b821
Exception code: 0xc0000005
Fault offset: 0x000206f1
Faulting process id: 0x1218
Faulting application start time: 0x01cc77ad500567bc
Faulting application path: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PaperCapture\OCRLibraryInf.dll
Report Id: f4534a50-e3a8-11e0-a299-0021700bc14d
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
I have tried running repair installs of the software as well as completely removing, rebooting, then reinstalling the software. I have also ran system file checker and chkdsk to make sure no other corruptions exist. I have also checked to make sure that there were no Windows Updates that may be impacting things and have verified she has the latest driver version for her Fujitsu 6230 Scanner. I am running short of ideas and, so far, not getting any good ideas from Google Searching.
Any help or advice would be greatly appreciated.Also, your log says: Acrobat.exe, version: 9.0.0.332
Looks like you have not updated Acrobat after install. The current version is 9.4.6. Also try updating Acrobat, Help->Check for updates -
Acrobat XI Pro crashing when changing highlighted text properties
After install update 11.0.07 EVERY after highlighting a section of text and attempting to change the properties the program crashes, this is happening in ALL my documents with highlighted text
Here is what I see, first screen shot is a PDF file that I received. To rule out errors in the first file I created the file in the second screen shot with the same results in both files when attempting to change the highlighted text properties ie CRASH
I'm in two mind as to ether uninstall and re install and apply update 11.0.06 , as there was no problem then, as this only seemed to start when update 11.0.07 was applied. OR to totally remove and re-install and then apply update 11.0.07 and see if this continuesI have the same problem with KERNELBASE.dll but the procedure is the same, I change into something thanks
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\KERNELBASE.dll
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f -
Acrobat 9 pro crashes when using Clear Scan OCR on OSX 10.8 (Mountain Lion)
Just wonder if/when there will be a fix available. Anyone experiencing the same problem?
Yeah, they kind of decided to just write off the issue. I mean "Searchable image" works, but for whatever reason ClearScan decides to just crash the program. I wonder if there is a licensing issue. God only knows how much time I've spent dealing with the licensing software in some of their other products (i.e. Premiere Pro), so I wouldn't be surprised.
-
Acrobat XI Pro crashes when I try to open it. Mac OS 10.10.1.
Just purchased and installed. On MacBook Pro Retina. I get a long Problem Report.
Hi Erick5,
What is the exact version of Acrobat XI installed on on you Mac?
Have you tried to install latest updates for Adobe Acrobat? Also you may try to repair disk permission using Safe mode in Mac: http://support.apple.com/kb/PH14204
Repairing Disk permissions: https://us.battle.net/support/en/article/repair-disk-permissions-and-repair-disk
Regards,
Ajlan Huda -
Acrobat X Pro crashes when signing a document
Acrobat crashes on any attempt to sign a document. Error is as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 10.1.0.534
Application Timestamp: 4ded1a14
Fault Module Name: AcroForm.api
Fault Module Version: 10.1.0.534
Fault Module Timestamp: 4ded283d
Exception Code: c0000005
Exception Offset: 000dc6ad
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Tried updating to current version and Acrobat crashed completely. Restored to 10.0.1.
EricYes it is up to date.
I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten.
Maybe you are looking for
-
Re install Office:mac 2008
Hi I bought Office: mac 2008 student and home in 2010 and had no problems. I then had to get my MacBook Pro completly wiped so I lost the software. I still had the backup disc so loaded it up and went through the installation process, I had to ring M
-
Shopping cart - item status table
Hi Friends, I have a requirement to develop a Z report which should include two status fields of Shopping Cart. One status column should show status at header level and the other should show status at item level. I am able to fetch the Status of the
-
hi.. in OME9.....Acct assgn category "cost center" there is one field consumption posting i.e. default "v"... and consumption posting key i.e. "VBR" if we use that cost center in line item then after GR the material is being consumed by cost center..
-
QT can't load external subtitles in mov files
Hi everybody, When I play an avi file, QT is able to load external subtitles (I've Perian installed). However, this week, I downloaded a file from apple, saved it as a mov file and created a subtitle file for it. Then, I put both files in the same di
-
OS 9 on 10.4.11?
Greetings, I have a powerbook G4 which is new to me... It came newly formatted an re-loaded with 10.4.2 from the system discs... I then updated to 10.4.11 from the Apple download site.. I now want to install OS 9 so that I can have access to Classic.