Acrobat9 for 64 bit Vista, program locks up at Form Wizard Import, why?

I installed Acrobat 9 Pro Complete (30 day trial) Version into my 64 bit Vista PC. After doing one Acrobat program required update to Windows, the program fully installed. When I go to Form Wizard, put in the name of a pdf file to open and click NEXT the program whites out and a error box pops up: Adobe Acrobat 9.0 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close Program." Any suggestions of what I can do? Bob--

It turned out to be a failing disk drive, the drive that had the catalog on it.
I had to set up the disk check tool, which had to be run on boot up because the disk had the user profiles on it. (explorer, right click on drive in left panel, select tools and the "check disk for errors" tool.)
It ran for several hours, but at 11% through stage 4 of 5, verifying file data, it stopped and went no further. So apparently at least one of the files couldn't be verified. Without going into detail, I was able to copy the files I needed to another drive (robocopy), swap drive letters around using diskpart and get back into operation.
So, apparently LR needs some additional error handling related to file handles. Somewhere in the initial load of a catalog a file read failed and the LR code doesn't have a handler for that kind of error. What should happen, in my opinion, is that the LR error handling should have displayed a message that indicated an unexpected hardware fault, most likely disk related and recommended I run CHKDSK on the drive where the catalog is located.

Similar Messages

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

Wireless driver for 64-bit Vista

I have installed 64-bit Vista on my 2007 MBP (15", 2.2 Ghz) and everything is working fine except wireless.
Can someone tell me what drivers I need to install since the ones on the Snow Leopard disk don't seem to be working (bootcamp 3.0)

I was able to find drivers online.

A135-S4527 Vista -programs lock up

I purchased my laptop in early 2007 ? With Vista loaded. Several month after I downloaded Firefox and the problems began. 1st the sound went away ( as been posted by many others here ) A little later on when working with Excell or word with a any browser open the program would lock up between switching programs. It does this all the time now and a window will pop up when it locks up asking if I want to restart the program. I do this wait a few seconds everything clears up and the cycle begins again. If I go to the the start button to open another program it will freeze , I then double click wait a few seconds it clears up and the cycle repeats itself all the time. A few months ago I upgraded to 4 Gig ram or I could not use the computer at all. If I have just the browsers open I can go for quite a while without a lock up, but as soon as a program opens the locking up begins. Somehow sound is back but you never know as occasionally it disappears.
Any suggestions would be appreciated.

Satellite A135-S4527
Order the recovery discs from Toshiba.
Order Toshiba Recovery Media
-Jerry

Flex builder for 64-bit vista

Hey,
Flex Builder (Eclipse) is bugging quite a lot in vista 64-bit, for example some of the views in propertise won't show, is there something I can do to get this fixed?

These links may help you out:
http://www.madvertices.com/2009/04/flex-3-vista-64-bit.html
http://www.deitte.com/archives/2008/10/how_do_you_spee.htm
http://forums.adobe.com/thread/427198
If this post helps, please mark it as such.

Site links to incorrect dv5-1058tx sound driver for 32-bit vista

The IDT High-Definition Audio CODEC Driver (Version: 6.10.6087.0 C ) does not appear to work with my dv5-1058tx running windows vista business (32-bit). It gives some compatability error.
How should I proceed?

I just did the same thing 5 days ago with Vista Ultimate. All I used was the Creative CD (option B in your email). I installed that, then used autoupdate to upgrade both the software and the drivers and it worked like a champ.
my rig has:?fatalityasus p5n32-e-sli2 gig memnvidia 8800dual core 6700?

No preview, thumbnails, or search in Windows Explorer 64 bit Vista

No preview in Windows Explorer for 64-bit Vista... is this supposed to be fixed in 8.1.2? Also, can't perform Windows Searches against the contents of PDF files, and the majority of PDF thumbnails are not showing up in Explorer. Not interested in using Tim Heuer/Foxit because it crashes frequently and doesn't deal with searches or thumbnails.
I assume all these problems are related to 64-bit--when can we expect a fix?

There is no fix - the pdfshell driver doesn't support x64 Windows.

Acrobat for 64 bit systems?

How can I upgrade from Adobe Acrobat 8.0 (32 bit) to Acrobat
for 64 bit Vista Business OS? Is this possible?

These forums are in relation to the 'Acrobat.com' service.
For questions about the Acrobat software please visit the Acrobat
product forum:
http://www.adobeforums.com/cgi-bin/webx?14@@.ee6b2ed
or contact Adobe technical support.
Thank you.
PS, Acrobat 8.1 and later will install and work on Vista 64
bit, so update to 8.1

Palm 130 software needed for new windows vista

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Hi, and welcome to the Palm Community Forums.
Please visit the Windows Hotsync board, where you will find many threads about synchronizing older Palm devices like the m130 to a Vista computer, including this one which is stickied near the top of that board.
You'll need to use Palm Desktop 6.2.2 and a free utility from www.pimlicosoftware.com called PalmHotsyncSetup. Note, this will only work for 32-bit Vista. There are no 64-bit USB drivers. If your desktop is Vista 64-bit, you will be limited to IR (infrared beam) sync, which will also require an IR adapter for your computer.
While I'm at it, I will relocate this thread to the Windows Hotsync board.
Message Edited by smkranz on 06-29-2009 10:24 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I have 64 bit Vista Home Premium. I need to download Flash in order to use Premier Pro CS4. Please help me so I can use your program.

Dear Folks:
I have the trial version of Adobe Premier Pro CS4, and I have 64 bit Vista Home Premium. I can not download Flash in order to view the Help Program Tutorial. I am a student at CCBC Essex Campus, and I need to assemble a three minute video for a class. I have Internet Explorer (latest version), and I also have Firefox. Please help me with a solution.
Thank You,
Dan Pasten
111 Alcock Road
Essex, Md. 21221-2110
United States of America
(410) 686-8067

For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Some tutorial links... these MAY not apply to CS4, but it doesn't cost to look
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

Program for creating a model is locked by User

Hi Guys,
We have created a process chain to create the Integration Model and to activate the Integration Model using this prg RIMODGEN. So, This prg we have created variants for different location wise. This process chain contains 13 processes For each location, which is running in parallel. Some time we are getting the error message " Program for creating a model is locked by User
Regards

Dear Pullaiah,
Locking happens if there is any overlap of models or duplicate scheduling of jobs with same variant.
See include LCIFIF01
CALL FUNCTION 'ENQUEUE_ECIF_IMOD'
EXPORTING
    mode_cif_imod = 'E'
    modelname      = i_modid
    logsys         = i_logsys
    apoapp         = i_appl
EXCEPTIONS
    foreign_lock   = 1
    system_failure = 2
    OTHERS         = 3.
So this means for you, you get the lockentry if the modelname, logsys and apoapp is the same. So please check again your variants if there is one with the same integrationmodels.
This can be the only reason we you get here this entry in your joblog.
Regards,
Tibor

Is QuickTime 7.6.9 Pro for Windows 7 a 64 bit software program?

Is QuickTime 7.6.9 Pro for Windows 7 a 64 bit software program?

Thanks.
Do you know if Apple is going to make a 64 bit version of QuickTime?
Message was edited by: sknernschield

HT1926 I have a French computer running on 32 bits instead of 64 (Vista). Reinstalled several times iTunes but keep on having failure 42110!! No download available for 32 bits????

I have a French computer running on 32 bits instead of 64 (Vista).
Reinstalled several times the latest iTunes but keep on having failure 42110!!
No download available for 32 bits???? This is more an Apple support question!!

Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; I download; I start installer; installation fails unexpectedly; installer rolls back installation; hardware seems PC capable;

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
I can consult Gateway; device drivers web sites; hardware drivers;
Please Email Deanallen@ a*l.com
< Email Edited By Host >

Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support

64-bit Drivers for XP or Vista

I just bought 4bg RAM for my santa rosa macbook pro and would like to install the 64-bit version of either xp or vista to take advantage of the added RAM. Does anyone know the status of the 64-bit drivers for macbook pro's? if apple hasn't released them, i can probably download them from intel's site. what kind of mobo, audio, lan, etc. does a 2.2ghz macbook pro have?

This should help - it helped me
http://forum.notebookreview.com/showthread.php?t=149395
I am running a full 64-bit Vista Ultimate on this MBP (S-R)
I installed it via BC1.3b and Tiger and got it working by downloading these drivers. Actually only the networking was not initially working.
I am now using Leopard and "upgraded" the drivers with the Leopard DVD. I did not notice any difference but I suspect that Vista ignored any driver that was inappropriate, so AFAIK, it's still 100% 64-bit, and it runs like a charm.
Is it just good Karma? But I have had none of the problems others seem to have, either with Leopard, BootCamp or Vista. Some minor "glitches" that we all expect. Safari used to crash in Tiger, so what's new?
Any other questions, let me know. I'll check back.

Acrobat9 for 64 bit Vista, program locks up at Form Wizard Import, why?

Similar Messages

Maybe you are looking for