Acrodist.exe version 9.0.0.332 application errors

We are running a Windows Server 2003 R2 server and are having trouble with Adobe Distiller. Below is the exact error we have:
Faulting application acrodist.exe, version 9.0.0.332, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
We are also getting the following. This is showing a information, not an error:
Reporting queued error: faulting application acrodist.exe, version 9.0.0.332, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
Any ideas?

After some research I found some threads that pointed to fonts being an issue. I changed the following:
Ignore True Type versions of standard PostScript fonts
Do not send fonts to "Adobe PDF"
The issue seems to have been resolved.

Similar Messages

Faulting application acrodist.exe version 8.1.3.187 x001e1c44

Around 0200 almost everyday I get a message: Acrobat distiller has encountered a problem and needs to close. When I go into the event view (my computer/manage) I see faulting application acrodist.exe, version 8.1.3.187 faulting module acrodist.dll, version 8.1.3.187. fault address 0x001e1c44. At this time of the morning I am not even sending anything to Adobe PDF.
Does anyone have a clue as to why this is happening or what I can do to get more information and narrow down the problem?

Hello.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

"iTunesSetup.exe is not a valid 32bit application" error received.

"iTunesSetup.exe is not a valid 32bit application" error received. I'm on dial up (no flames or stupid comments in reference to this please) with Toast using IE9. I've uninstalled, deleted, and restarted my computer after each attempt. I've tried with 32bit and 64bit. I've tried at the local library using their WiFi connection and at home with the dial up. I've tried running program and saving before running both download types. This has been 3 days of work since the 24th all so my son can try and use his iPod Touch. Is there no way of accessing iTunes with the iPod Touch without having it installed on the computer? I'm sick of this and so disgusted with Apple right now. I'm sorry that I'm on dial up, but out where I live, everyone is because there is no reception for phones or satelite. And even coming to town to use the quicker internet here, it still was a 6hour plus download time. And right when I click 'Run', it gives me this error message each time.
My son and my whole family and neighborhood after I've asked everyone's help with this problem has become fed up with Apple cause there is no disc they can mail me to get iTunes onto my computer and no one else we've asked can download it either. One person has the program but its iTunes 7 and they can't upgrade because of dial up. His iPod Touch will not even go to any other screen but the one that shows the plug and iTunes icon on it. I would really appreciate some kind of help from someone cause we are all sick of this, my son is not happy, and this was supposed to be a Christmas present that he could use. I can not even remotely begin to....well, I could fill this page with gripes but I would just really appreciate a knowledgeable answer that I can use to quickly fix this for my son's Christmas. Please help.

Karen, this is far off-topic in a sense. But I have a sister in the wilds of central MI. No access to cable no way. And limited 3G minutes.
She finally opted for MiFi and can get much faster online access. She is able to download to her iTouch, iPad and Mac laptop (3 y.o.) much faster than her old dialup.
It's worth checking if it might help. Hers is Verizon (http://www.verizonwireless.com/b2c/mobilebroadband/?page=products_mifi)
AT&T also has MiFi (http://www.wireless.att.com/businesscenter/devices/att-mobile-hotspot-mifi-2372. jsp).
There may be others as well.
I am spoiled w/ cable but it's been great for her. If this is out of line or you've explored it to no avail please ignore.
Best wishes and hope these bumps get smoothed out. Hope you have a good New Year and your son's iTouch problems get worked out.

**SOLUTION** DLLML.exe Fails to load at startup (application error)

Hello everyone!
I purchased the SB X-Fi Fatalty Champion Edition soon after release, and think this is the best card I have ever used to date. Absolutely love it, unbelievable sound.
Now a year or two ago I noticed a certain file failing to load when I started windows.
This file, DLLML.exe. To my understanding this file is used to load EAX emulation support into older games/modules (essential loads a "middle-man" file between the game's sound files/.dll's, and the hardware SPU [Sound Processing Unit, not a real acronym, but that's what I call it since GPU and CPU are similar distincti've acronyms so if you see it used anywhere, it came from me ] to allow EAX support in non-EAX enabled games), and/or to add EAX effects in your audio files using the Wave Studio app.
I've pinpointed this issue to either a Windows Update, or the Creative auto-update (which could mean it is an error caused by an installaion combination of multiple apps at once) because this issue did not arise until I did these two things (did Windows Update, then Creative Auto-Update, then restarted computer).
Now I've primarily had this issue with Windows XP x64 but I have had this issue at times with Windows XP x86 as well.
After you install the software suite, it adds an entry in your Windows Startup to load the module (Start/Run. msconfig. Startup tab. Look for STARTUP ITEM: DLLML). The entry looks like this:
WinXPx86 looks like: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
WinXPx64 looks like: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
Under most circumstances this module loads fine, but because Creative, for reasons why I have not delved into, loads some of their DLL files differently than the Windows standard, which may also be a cause of this issue (extremely unlikely, I believe it is one of the 2 things i mentioned above).
Either way, after I did those 2 things, the DLLML.exe startup entry failed to load every time.
But I fixed it.
Now what you have to do to resolve this issue, involves editing the startup entry in the Windows Registry.
If you are scared to go into it, have no idea what I am talking about, or never edited the Registry before, don't worry. If you follow these steps EXACTLY, you have nothing to fear.
I will be using default installation parameters for file pathing, so if your Operating System is installed in a different dri've letter other than C:\, then just change the letter to the one your OS is installed onto.
Capitals used for emphesis on actions to take:
-Hit the START button, then select RUN
--------If RUN is not in your start menu, you need to enable it by right-clicking and open area of your TASKBAR, select PROPERTIES. --------Click the START MENU tab, then the CUSTOMIZE button. Click the ADVANCED tab. In the START MENU ITEMS box, scroll down to the entry that says SHOW RUN. Check the checkbox to fill it. Then OK/APPLY/OK, and you should be back to the desktop. Then go to START/RUN
-type the word REGEDIT
--------This opens the Windows Registry.
--------DO NOT change ANYTHING in this other than the exact directions I specify or you may corrupt your registry or even worse, corrupt your system, which means F&R time (Format & Reinstall). Treat it like a stripper. You can look all you want but don't touch or there could be dire consequences.
--------Now the fastest way to find this is to manually navigate to the specific "key" or "entry" you need to modify. Mouse-click the +'s to navitage further into the "hi've" following these maps:
-FOR WINDOWS XP x86 USERS NAVIGATE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
-FOR WINDOWS XP x64 USERS NAVITAGE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Microsoft\Wind ows\CurrentVersion\Run
--------Now you are looking for a specific entry NAME called RCSYSTEM. Depending on which version you are running. They are:
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-------Now we are going to edit the entry. What we need to do is get rid of that * (asterix) character in the name. I don't know why it is there, I'm thinking it may be a coding error. But in my WinXPx64, this was the culprit.
-Double-click the RCSYSTEM key to edit it, and edit it so it looks EXACTLY LIKE THIS (If you're paranoid about doing something bad, COPY and PASTE this line pertaining to your installed OS. KEEP IN MIND THE INSTALLATION DRIVE LETTER, CHANGE FIRST LETTER IF NESCESSARY)
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-click OK button. Now it is changed.
-------And we're DONE EDITING the Registry entry!
-now go to FILE in the top-left menu, then select EXIT
-RESTART your computer
-------You should not receive the "DLLML.exe failed to load" (application error) again!!
To check to see if it loaded into your system properly (as if not getting the error message anymore was proof enough it loaded properly), when you reboot back to the desktop, do the "three-fingered salute" (ctrl-alt-delete), then select the PROCESSES tab. Click on the IMAGE NAME heading to sort it alphabetically, and look for the name (WinXPx86) DLLML.exe or (WinXPx64) DLLML.exe *32.
If you see it listed, it loaded!! CONGRATS, IT BE FIXED!!
If this did not work for you, then your system is posessed, get a priest. I don't think a witchdoctor would give your comp good vibes O_o
Hope this resolved it for you. Enjoy your EAX with Duke Nukem 3d again!
EDIT: As a side note, I also noticed that since after this fix, my computer doesn't hang after sending the restart/shutdown killsignal, so I am wondering with people having similar hanging issues, if their issue could be resolved something similar to this.
Just a thought for any admins/mods/users out there that know what they are doing that maybe wanna test that out.
Sincerely,
Jason Ostapyk
3yr degree, MCP, CCNA, A+ certified, Specialised Electrician Class M Licensed

G Kudos for a brilliant finding! After a Windows Hotfix on my XP SP3, when shutting down my PC I would wait for a program and then get an error that EAX was not responding before finally shutting down. On next reboot I lost sound on my PC. After running tests, the Direct Sound test failed pointing at EAX.
This solution cured the problem. Again, kudos, job really well done!!!

Sqlplus.exe is not a valid win32 application error

Hi All,
I have installed oracle 10gr2 on windows xp.
if i type sqlplus in command prompt i get this error
"C:\oracle\product\10.2.0\db_1\BIN\sqlplus.exe is not a valid win32 application".
i went to the path where sqlplus is present i observed that sqlplus.exe file was 0KB.
how can i resolve this problem. i want to upgrade oracle 9i to 10g so i need sqlplus of 10g to work properly.
please anyone help me out to solve this problem.
Regards,
Veeresh S

You'd have to find out how and why that file became 0KB in size.
If one file is 0KB in size, what assurance do you have that other files aren't
also corrupted ?
It could have been a virus-scanner wrongly attempting to quarantine the file,
it could have been a backup-restore session that copied the file back as 0KB,
it could have been some command that you executed in attempting the upgrade.

*.exe is not a valid win32 application error message

When I download updates I cannot install them. I get the error message that they are not valid Win32 applications, which I know is not correct. This is apparently a common problem with Windows 7, and nobody has come up with a solution in the
forums.
Any ideas?

OK. I think I figured it out. Neither the forums nor MS were of any help whatsoever. In my case, my recollection was that the problem started at about the same time I had an infection, and installed antivirus SW (Ad Aware), which fixed
the problem. Today, I unistalled Ad Aware, and voila! the *.exe files download and run as they had before the problem arose.

Setup.exe gives 'not a valid win32 application' error

hi
im trying to install 9i on win XP pro.i have a 538 MHz intel celeron processor with 192 mb memory.
everytime i click on the setup.exe i get an error 'not a valid win32 application'.what do i do to rectify this problem?
thanks

Same problem?
Install Oracle9i Release 2 (9.2.0.2)

Acrodist.exe The application was unable to start correctly (0xc0000005)

I have a Creative Cloud account, I had Acrobat 9 on my Windows 7 64-bit machine before. Decided to upgrade to Acrobat XI. Now I keep getting this error:
Faulting application name: AcroDist.exe, version: 11.0.7.79, time stamp: 0x536b6f17
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea8e7
Exception code: 0xc0000005
Fault offset: 0x0002e3be
Faulting process id: 0x1af8
Faulting application start time: 0x01d01c6103dcacf1
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\AcroDist.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 4b93c4ee-8854-11e4-bb20-005056c00008
I tried to uninstall all versions and install the latest. No luck.
Not sure if it's of any relation, but in the latest Photoshop which I also recently upgraded, when I try to use the typing tool, it's crashing, or more specifically becomes unresponsive for minutes. I had a forum question about that and they said it might be related to fonts, but i had no issues with Photoshop CS4, not sure if that's any relation to this issue.

Hi Pixelbendr,
There might be chance of previous version left overs. Try uninstalling Acrobat again using cleaner Tool : http://labs.adobe.com/downloads/acrobatcleaner.html
Then try to install again and see if that make any difference. If it doesn't, uninstall again. Create a new user profile with admin rights and check.
Regards,
Ajlan Huda.

Faulting application acrodist.exe

I have installed Acrobat 8 Professional on a Windows 2003 server to run Acrobat Distiller. Currently, I am running an MS-DOS batch file that calls "acrodist.exe" to create a large PDF file from a Post Script file with an Administrative task on the Windows 2003 server. It seems that the call to "acrodist.exe" is being passed over and the large PDF file is not created. Listed below is the error from the Application Event Log:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 2/25/2008
Time: 8:00:37 AM
Description:
Faulting application acrodist.exe, version 8.0.0.456, faulting module AcroDistDLL.dll,
version 8.0.0.456, fault address 0x000ca1f6.
This is a nightly report process that needs to run consistently in order to send out two sets of reports to our customers. Please advise on next diagnostic steps or any advice on solving this problem.

Acrobat Professional is not licensed nor designed to be run as a server application.
You can install Acorbat Professional on desktop computer and run distiller with "Watched Files" located on servers.
It should be noted that Micro$oft is also preventing the use of desktop applications on servers by not including or renaming certain desktop services.

Acrobat Distiller Application Error: acrodist.exe ntdll.dll

Hello All,
When submitting a doc to the distiller I intermittently get the follow error;
Faulting application acrodist.exe, version 8.2.2.217, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
Can anyone offer an explanaion for what might be causing this?
If you need more info just ask...
Thanks in advance....
Pit.

If this is a question about Distiller, please repost in the Acrobat forum. This forum is concerned with the Distiller SERVER product for Windows. Please include information about your OS, and the source of the postscript file being distilled as well as the job options file you are using when distilling.

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Acrodist.exe application error

I installed Adobe Acrobat 7.0 successfully. But when I convert a word file into PDF file, a error message pop-up as " AcroDist.exe application error --- the instruction at "0x0048C9e5" referenced memory at "0x0190eb6c", The memory could not be "read" Click on OK to terminate the program "
If I click the program Acrobat Distiller, the same message box shows up.
I tried to uninstalled and re-installed. Couldn't solve the problem.
need help.

This problem came up on my laptop today and I have found a solution, at least on mine. I was getting the exact same error as above (with different memory locations) when I tried to start Distiller (Acrobat 7.0). It had worked fine for years. On mine it was limited to my specific user account. I could run Distiller fine from the Administrator account. I also created a new standard user account to test with and it ran fine from that one as well. But it wouldn't run from my personal account. So I knew it was something with that specific account.
To make a long story short, it ended up being a corrupt cache. You can find the cache in the following location:
C:\Documents and Settings\[your user name]\Application Data\Adobe\Acrobat\Distiller 7\
What I did was just rename the old cache folder and let distiller recreate it. That fixed it. Good luck.

My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          11.0.1.12
Application Timestamp:          50c8fc7e
Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          4ea5d609
Exception Offset:          653f1040
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

ITunes stops working moments after selecting . Microsoft offers to find solution but no response?Problem Event Name: BEX Application Name: iTunes.exe Application Version: 11.2.2.3 Application Timestamp: 5383f31a Fault Module Name:

Microsoft report gives details of problem:
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
11.2.2.3
Application Timestamp:
5383f31a
Fault Module Name:
StackHash_0a9e
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
00000000
Exception Offset:
00000008
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
2057
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789
I have tried reloading the iTunes player but same thing happens after selecting it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

My itunes wount open when i try to open it this message comes up Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.6.3.25   Application Timestamp:     4fd16377   Fault Module Name:     CRYPTU

when i try to open my Itunes this Message comes up
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.6.3.25
Application Timestamp:    4fd16377
Fault Module Name:    CRYPTUI.dll_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4ce7b847
Exception Offset:    68221040
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    5129
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Taken at face value, you're having trouble with a Windows operating system file there.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Acrodist.exe version 9.0.0.332 application errors

Similar Messages

Maybe you are looking for