Acronis True Image Notifications sending via SMTP

Sometime after 2/23 multiple devices stopped sending backup notifications due to some change at Verizon on the SMTP server. I am starting to believe it is related to phasing out of weaker SSL ciphers.I say this because I attempted to use gmail and received a blocked attempt due to an "older application". I overrode the gmail security settings and now it works but the thought of changing every backup job on every PC is just ridiculous. Other applications can send notifications. I cannot afford to upgrade 10+ licenses of Acronis because Verizon changed settings.
Anyone have ideas of how to work around or fix this?
Or why Verizon would make changes and not let anyone know?

> Hello again Berga
>
> Really sorry to trouble you again, but I've been in
> touch with Acronis support again and they are trying
> to trace the solution they did for you, and have
> asked me if I know the support reference number that
> you had on your emails from them. If you still have
> it that would be really great.
>
> Thanks a lot
Hi, no problem.
I have all the emails, from and to the Acronis, but the only reference
that can be useful is the follow:
----- Original Message -----
> From: "Acronis Customer Service Department" <[email protected]>
> To: <[email protected]>
> Sent: Tuesday, January 17, 2006 1:17 PM
> Subject: [Acronis #461748] RE: Acronis: Please confirm your wish to create
> an account
Thank you for taking the time to contact us.
> > --
> > Best regards,
> > Artem Khalitov
I hope will be useful for you.
Bye. Berga

Similar Messages

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

How do I download Framemaker 11. My copy was wiped out by Acronis True Image.

I tried to clone my program disk with Acronis True Image. Through my fault, or through a program mis-step, the program wiped out my Framemaker 11. How do I download a new copy?

Online resources
For general Adobe Forums visit http://forums.adobe.com/community/framemake
To find help on topics related to downloading, installing, and
getting started with your software visit http://helpx.adobe.com/download-install.html
For product help
plus community-based instruction, inspiration, and support visit http://helpx.adobe.com/framemaker.html
Customer support
For Adobe Customer Care visit http://www.adobe.com/go/customer_support which provides assistance with product information, sales, registration,
and other issues.
Regards
Rajshree

Problems getting Acronis True Image Home 2010 to find my image files.

I have recently purchased this A505-S6005 laptop and it has been nothing but a pain in the pretty much ever since I got it. Recently I have tried to roll back to a previous system image I created with Acronis True Image Home 2010 but am unsuccessful everytime I make the attempt.
Everytime I try to recover from the previous image which I have saved on a external drive I get an error message "Cannot find any hard disk drives" upon startup of the Acronis recovery manager. I get this problem no matter which way I go around it either from the boot cd that I created or directly from Windows and the Acronis software.
I simply cannot restore from my image file no matter how hard i try to get it to work.
Does anyone else have these issues with Acronis True Image 2010?

Satellite A505-S6005
Best to post in the Acronis forums.
-Jerry

Acronis True Image Backup/Restore

Had my 3000 K100 for about a month now - working fine.
Like many others, the one key restore feature, 20 GB "c" drive, hidden partitions all are a bit confusing to me.
I use Acronis True Image to create emergency boot disks, and have an external drive that I use to make an image of my c and d drives. I do a full backup at least once a week. So, I really don't have to rely on on the built in Lenovo restore features.
Is there a way to just "turn it off"? Then I could make my c drive bigger - and not worry about how it would affect the one key restore features, base backups, etc.
Lenovo 3000 K100 57061330 Intel Desktop Computer - Intel Core 2 Duo E6550 2.33GHz, 3GB DDR2, 500GB SATA, SATA DVDRW, Windows Vista Home Premium, Nvidia G-Force 8600, external Maxtor 500GB backup disk.

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Acronis True Image

I just received my x120e but I want to replace the hard drive, I am attempting to clone the factory drive as follows:
Using the clone tool in Acronis True Image, I have the source (factory) drive in my machine and the target drive in an external usb enclosure. After finalizing the settings windows reboots to the clone screen where the progress is documented in text.
Everything appears to be going well until about 70% everytime I have attempted. At this point the screen always turns off for some reason.
I'm not sure if the process is still continuing without the screen on or what, each time I have left it for a little while and then done a hard shutdown. Then when I inspect the target drive it always has one small system partition and then the rest unallocated space.
Anyone have any idea what is going on? Is there an easier way to clone the factory drive onto the new drive?
It is currently running right now and has gone to the black screen, I am going to let it run for an hour or so and see if it comes back.
Thanks!

richk wrote:
I put the current disk into the enclosure, the new drive into the main bay, and boot from the acronis CD.
Me too. In fact I would go as far to say that this point is mission critical.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Acronis True Image Frustration

I have a desktop computer running Windows XP Professional. My old hard drive is a WDC WD800JD. I have purchased and installed a new WDC WD5000AAKS hard drive. I am attempting to clone the old drive onto the new drive using the Acronis True Image WD Edition. I downloaded it recently and it is up to date.
I have now made several attempts to clone the old drive, all of which have failed. For the most part, I get past the point where I restart the computer and the Operation Progress window opens. At some point during "1 of 2 - Copying Partition" the process just freezes. I have let the computer run overnight but once it stops, it never goes any further. The mouse works, I can minimize the window or select the Cancell button. Although, cancell does not work.
I am totally stumped on what to do and quite frustrated with this software. I have tried shutting down as many programs as I can so nothing is running in the background. All my anti-virus programs are shut down. There is 9.64 Gb of free space on the old drive. Any thoughts?
If there is a better (free) cloning software out there, I will try it.

Hello,
I recommend you take a look at these links.
How to manually clone a disk with Acronis True Image WD Edition software
How to automatically clone a disk with Acronis True Image WD Edition software
Review the steps and try again. If you still have the same issue then I recommend you contact WD support.
Contact WD

Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Not that I know of. I have Acronis on all of my PCs, and have had to use a reinstall by the tib file. I believe (someone correct me if I'm wrong) Apple senses ip address, PC hardware configurations etc. to confirm a Authorized Computer Count. I had done a total reinstall of Windows 7, and iTunes still acknowledged that PC as being one of my Authorized PCs. So an Acronis restore should not be no problem. I also think that if a person maxes out on their 5 limit, that Apple allows you to be able to"re-set" it. Again,those who are more proficient here, can also confirm that.

Configuring a custom fax cover page to send via SMTP

Hi,
Does anyone know how we can configure a custom fax cover page in the case of sending fax via SMTP, for instance in the process of sending the payment advice, associated with transaction F110? I have a situation where a fax cover page that clearly was developed (maybe SAPSCRIPT) is being sent along with the document (wich was created as an attachment to the email), but don´t understand where it came from and i want to inhibit it from being sent.
Thanks,
Bruno

Hi Hasan,
I have similar requirement. I see your post is pretty old and hope you would have found the solution at that time.
Could you please share it with me?
Thanks
Puneet

How to ZIP file and send via SMTP in Oracle

Dear All,
I want to send data every month via email where the data i got from view.
The problem is the file is to big, so i should zip it.
the question is How i can perform it with procedure and send it automatically via Job every 1st month
what i've done was i create a procedure to make the file in zip
[quote/]
CREATE OR REPLACE PROCEDURE production.CREATE_EXCEL_DTKPITerminate IS
    vvrun varchar2(3000);
    vsender varchar2(100);
    vrecepient varchar2(100);
vccrecipient varchar2(1000);
    vsubject varchar2(1000);
    vmessage long;
    v_loc varchar2(5);
   NAME:       CREATE_EXCEL
   PURPOSE:
   REVISIONS:
   Ver        Date        Author           Description
   1.0        10/15/2012          1. Created this procedure.
   NOTES:
   Automatically available Auto Replace Keywords:
      Object Name:     CREATE_EXCEL
      Sysdate:         10/15/2012
      Date and Time:   10/15/2012, 9:42:40 , and 10/15/2012 9:42:40
      Username:         (set in TOAD Options, Procedure Editor)
      Table Name:       (set in the "New PL/SQL Object" dialog)
begin
   vsender := '[email protected]';
     vrecepient := '[email protected]';
vccrecipient := '[email protected]';
     vsubject := 'KPI Terminate'||TO_CHAR(SYSDATE,'MM-YYYY');
     vmessage :=
        'MESSAGE .';
     as_xlsx.query2sheet('
     select cmp_company,emp#,name,class,goucode,goudesc,job,job_name,tglkeluar
            ,nac_seq,nac_code,nac_type,nac_begin,nac_desc,reason,reason_code
            from V_KPITerminate
     --insert into blobs(blob_id,blob_name)
     --values (1,as_xlsx.finish);
     SEND_SMTP_PUZZLE_DTKRY(vsender,vrecepient,vccrecipient,vsubject,vmessage,as_xlsx.finish,'DataKPITerm -'||to_char(sysdate,'yyyy')||'.zip');
--as_xlsx.save( 'BASE_DIR3', 'SWT.xls' );
end;
[/quote]
when i execute this, Error ocured
Message       : ORA-29278: SMTP transient error: 421 Service not available
ORA-06512           : at "SYS.UTL_SMTP", line 21
ORA-06512           : at "SYS.UTL_SMTP", line 97
ORA-06512           : at "SYS.UTL_SMTP", line 399
ORA-06512           : at "PU22PROD_123.SEND_SMTP_PUZZLE_DTKRY", line 151
ORA-29294           : A data error occurred during compression or uncompression.
ORA-06512           : at "PU22PROD_123.CREATE_EXCEL_KPITERM", line 60
ORA-06512           : at line 2
cann anyone help?
the data is too big so i prefer it zip.. can anyone help..
the SMTP I use is like this
CREATE OR REPLACE PROCEDURE production.SEND_SMTP_PUZZLE_DTKRY (pSender VARCHAR2,pRecipient VARCHAR2, pCCRecipient VARCHAR2, pSubject VARCHAR2,pMessage LONG,pattach BLOB,pfilename VARCHAR2) IS
v_src_loc BFILE := BFILENAME('BASE_DIR3', 'pajak.xls');
      l_buffer   RAW(54);
      l_amount   BINARY_INTEGER := 54;
     l_pos      INTEGER := 1;
     l_blob     BLOB := EMPTY_BLOB;
     l_blob_len INTEGER;
      v_amount   INTEGER;
      crlf CONSTANT VARCHAR2(2):= CHR(13) || CHR(10);
v_connection_handle UTL_SMTP.CONNECTION;
    v_smtp_host          VARCHAR2(30) := 'mail.mayora.co.id'; --My mail server, replace it with yours.
    v_subject            VARCHAR2(30) := 'Your Test Mail';
    l_message            VARCHAR2(200) := 'This is test mail using UTL_SMTP';
pcc varchar2(50);
i number := 1;
j number := 1;
l_original_blob blob;
l_compressed_blob blob;
BEGIN
   BEGIN
     /*Preparing the LOB from file for attachment. */
     --DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
     --dBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
     --v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
     --DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
     --l_blob_len := DBMS_LOB.getlength(l_blob);
l_original_blob     := pattach;
     l_compressed_blob   := TO_BLOB('1');
UTL_COMPRESS.lz_compress (src => l_original_blob,
                               dst => l_compressed_blob);
--DBMS_LOB.FREETEMPORARY(l_compressed_blob);
l_blob := l_compressed_blob;
     l_blob_len := DBMS_LOB.getlength(l_blob);
     /*UTL_SMTP related coding. */
     v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
     UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
     UTL_SMTP.MAIL(v_connection_handle, psender);
     UTL_SMTP.RCPT(v_connection_handle, precipient);
    if pCCRecipient is not null then
        if(instr(pCCRecipient,',') = 0) then
        utl_smtp.rcpt(v_connection_handle, pCCRecipient);
        else
       while(instr(pCCRecipient,',',i) > 0)
        loop
        pcc := substr(pCCRecipient,i, instr(substr(pCCRecipient,i),',')-1);
        i := i+instr(substr(pCCRecipient,i),',');
        utl_smtp.rcpt(v_connection_handle,pcc);
        end loop;
        pcc := substr(pCCRecipient,i,length(pCCRecipient));
        utl_smtp.rcpt(v_connection_handle,pcc);
        end if;
    end if;
     --UTL_SMTP.RCPT(v_connection_handle, v_cc_email_address);
     UTL_SMTP.OPEN_DATA(v_connection_handle);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'FROM' || ': ' || psender || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'TO' || ': ' || precipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'CC' || ': ' || pCCRecipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'SUBJECT' || ': ' || pSubject || UTL_TCP.CRLF);
   --MIME header.
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' boundary= "' || 'BASE_DIR3.SECBOUND' || '"' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Body
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: text/plain;' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' charset=US-ASCII' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, Pmessage || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Attachment
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: application/octet-stream' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' filename="' || pfilename || '"' || --My filename
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
   /* Writing the BLOL in chunks */
     WHILE l_pos < l_blob_len LOOP
       DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
       UTL_SMTP.write_raw_data(v_connection_handle,
                              UTL_ENCODE.BASE64_ENCODE(l_buffer));
       UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
       l_buffer := NULL;
       l_pos    := l_pos + l_amount;
    END LOOP;
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Close Email
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || '--' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
     UTL_SMTP.CLOSE_DATA(v_connection_handle);
     UTL_SMTP.QUIT(v_connection_handle);
EXCEPTION
    WHEN OTHERS THEN NULL;
    --return 1;
      UTL_SMTP.QUIT(v_connection_handle);
      RAISE;
END;
END;

this is my smtp procedure
CREATE OR REPLACE PROCEDURE PROD.SEND_SMTP_PUZZLE_DTKRY (pSender VARCHAR2,pRecipient VARCHAR2, pCCRecipient VARCHAR2, pSubject VARCHAR2,pMessage LONG,pattach BLOB,pfilename VARCHAR2) IS
v_src_loc BFILE := BFILENAME('BASE_DIR3', 'pajak.xls');
      l_buffer   RAW(54);
      l_amount   BINARY_INTEGER := 54;
     l_pos      INTEGER := 1;
     l_blob     BLOB := EMPTY_BLOB;
     l_blob_len INTEGER;
      v_amount   INTEGER;
      crlf CONSTANT VARCHAR2(2):= CHR(13) || CHR(10);
v_connection_handle UTL_SMTP.CONNECTION;
    v_smtp_host          VARCHAR2(30) := 'mail.mayora.co.id'; --My mail server, replace it with yours.
    v_subject            VARCHAR2(30) := 'Your Test Mail';
    l_message            VARCHAR2(200) := 'This is test mail using UTL_SMTP';
pcc varchar2(50);
i number := 1;
j number := 1;
l_original_blob blob;
l_compressed_blob blob;
BEGIN
   BEGIN
     /*Preparing the LOB from file for attachment. */
     --DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
     --dBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
     --v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
     --DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
     --l_blob_len := DBMS_LOB.getlength(l_blob);
l_original_blob     := pattach;
     l_compressed_blob   := TO_BLOB('1');
UTL_COMPRESS.lz_compress (src => l_original_blob,
                               dst => l_compressed_blob);
--DBMS_LOB.FREETEMPORARY(l_compressed_blob);
l_blob := l_compressed_blob;
     l_blob_len := DBMS_LOB.getlength(l_blob);
     /*UTL_SMTP related coding. */
     v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
     UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
     UTL_SMTP.MAIL(v_connection_handle, psender);
     UTL_SMTP.RCPT(v_connection_handle, precipient);
    if pCCRecipient is not null then
        if(instr(pCCRecipient,',') = 0) then
        utl_smtp.rcpt(v_connection_handle, pCCRecipient);
        else
        while(instr(pCCRecipient,',',i) > 0)
        loop
        pcc := substr(pCCRecipient,i, instr(substr(pCCRecipient,i),',')-1);
        i := i+instr(substr(pCCRecipient,i),',');
        utl_smtp.rcpt(v_connection_handle,pcc);
        end loop;
        pcc := substr(pCCRecipient,i,length(pCCRecipient));
        utl_smtp.rcpt(v_connection_handle,pcc);
        end if;
    end if;
     --UTL_SMTP.RCPT(v_connection_handle, v_cc_email_address);
     UTL_SMTP.OPEN_DATA(v_connection_handle);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'FROM' || ': ' || psender || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'TO' || ': ' || precipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'CC' || ': ' || pCCRecipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'SUBJECT' || ': ' || pSubject || UTL_TCP.CRLF);
     --MIME header.
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' boundary= "' || 'BASE_DIR3.SECBOUND' || '"' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Body
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: text/plain;' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' charset=US-ASCII' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, Pmessage || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Attachment
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: application/octet-stream' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' filename="' || pfilename || '"' || --My filename
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
   /* Writing the BLOL in chunks */
     WHILE l_pos < l_blob_len LOOP
       DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
       UTL_SMTP.write_raw_data(v_connection_handle,
                              UTL_ENCODE.BASE64_ENCODE(l_buffer));
       UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
       l_buffer := NULL;
       l_pos    := l_pos + l_amount;
    END LOOP;
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Close Email
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || '--' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
     UTL_SMTP.CLOSE_DATA(v_connection_handle);
     UTL_SMTP.QUIT(v_connection_handle);
EXCEPTION
    WHEN OTHERS THEN NULL;
    --return 1;
      UTL_SMTP.QUIT(v_connection_handle);
      RAISE;
END;
END;
is there a mistake?

Unable to verify email in order to send via SMTP f...

Driving me nuts this one.
I just want to receive email notifications from my Synology NAS. So I know I need to verify the email address it is sending emails from in order to access the smtp server mail.btinternet.com.
The email address works correctly and receives email but when I try to verify the address my NAS sends from I get the following error: (#604,E2) You are trying to add an email address that has been blocked by the email address owner. Please enter a different email address.
I can add [email protected] or annoying@thedomainIregisteredjusttogetthisworking.org
It accepts it, sends the email, I receive it no problem.
But will not send to [email protected], which is the email address the NAS uses.
Telephone support "cannot help me, ring home it support".
Grr!

g0nz0x wrote:
Driving me nuts this one.
I just want to receive email notifications from my Synology NAS. So I know I need to verify the email address it is sending emails from in order to access the smtp server mail.btinternet.com.
The email address works correctly and receives email but when I try to verify the address my NAS sends from I get the following error: (#604,E2) You are trying to add an email address that has been blocked by the email address owner. Please enter a different email address.
I can add [email protected] or annoying@thedomainIregisteredjusttogetthisworking.org
It accepts it, sends the email, I receive it no problem.
But will not send to [email protected], which is the email address the NAS uses.
Telephone support "cannot help me, ring home it support".
Grr!
Hi. Welcome to the forums.
Unfortunately an admin account on a personal domain does seem to be blocked, or just not work. A few of "us" have tried and although the blocking message doesn't always appear - no email is received for the admin account in order to verify it.
Clearly there is something that Yahoo! is doing to prevent it for any domain. I expect it's a mistake or a software programming issue.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Airport Extreme + Acronis True Image

I am trying to send a backup to my hard drive connected to the airport extreme by USB.
Acronis requires a user name and password to access the USB drive.
Anybody know what the username should be?
Anybody using this setup for windows?
Can anybody recommend a backup software that does work for them with this arrangement?

Hello,
No specific recommendation as to disk imaging software, but I wrote a document on various backup strategies that you might find of interest: Options for backing up your computer [PDF]
By the way, you might want to consider installing Microsoft Windows XP SP3 and all post-SP3 updates on the T20, just to get it up to date with all of the security and reliability updates Microsoft has made since SP2 was released.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Upgraded to Lion, now Apple Mail no longer sends via SMTP to GMAIL

Greetings! First and foremost, THANK YOU for reading this discussion. I truly appreciate any and all assistance. Being one who likes to exhaust all resources before posting, I have literally spent that last 7 and a half hours reading pages and pages of threads here, on Google Forums along with finding other data across the net.
The problem started immediately upon the LION upgrade. Everything worked fine until the upgrade and then BOOM...no more Apple Mail sending to Gmail SMTP server. I can receive Gmail just fine, but no can send.When a message is sent, after a long while, an error message pops up stating that the SMTP server is "off line." Obviously it is timing out.
I have confirmed the settings in Preferences. I have cleaned the hard drive (running the internal First Aid app). I confirmed the password was correct in KeyChain. I have tried a lot of corrective methods as stated in the threads.
I have tried using different ports (25, 465, 587). I have set the connection from smtp.gmail.com to actual IP addresses including the following:
209.85.227.109
74.125.91.109
74.125.39.16
74.125.157.109
74.125.113.109
173.194.68.109
I tried it with and without TLS/SSL enabled.
With authentication and without.
I even tried to telnet from the Mac to smtp.gmail.com without success. (I can telnet from a Windows machine though...OUCH)
I am NOT running LION OS X server, just plain old LION OS 10.8.2 on my MacBrook Pro.
Thank you in advance for any and all courtesies extended. Looking to resume using Apple Mail with my Gmail account ASAP.
Sincerely,
MWG2

Thanks Lanny...tried it...still doesn't work. Called Apple Support...switched to Tier 2 support person Chris P. Was on the phone with him for 2 hours and 38 minutes...we tried everything under the sun...still can't get to smtp.gmail.com...can't even telnet to it from Mac. We did network testing too...he thought my router was blocking ports 25, 465 & 587 but the router wasn't. After exhausting every concievable MAC setting, trying a number or solutions, killing the account and re-installing multiple times, his conclusion is that there is a third party software "blocking" the send in gmail...ummmmm...makes no sense to me as everything worked perfectly until I upgraded to OS X. Hence his solution is for me to take my Mac to the Apple Store and have them look at it. My solution? Don't use mail on the Mac and keep using Mail on my Windows machine. I prefer Mac, but I have now spent over the last two days in excess of 10 hours on this problem...it's not supposed to be this difficult. Lesson Learned...if something's working, DON'T goof with it...Apple Mail under Snow Leopard worked perfectly...upgraded to Mt. LION (paid for it) and now I am really paying the price for doing that.

Unable to send via SMTP with 10.6.1

I'm having difficulty getting Mail to send outgoing mail through SMTP at work. I also run Mozilla T-Bird and it works fine with the same settings, so it's not a firewall issue. I upgraded to 10.6.1 today with no good effect. The other systems in our office (Windowz) are able to SMTP fine.
By the way, our ISP does not require username/password or SSL.
Since T-Bird works fine, I am using that (with all the same SMTP settings!) Too bad, I was considering migrating to Apple Mail as my mail client, maybe I will reconsider ...
Any ideas anybody?
Thanks, Todd
P.S. The Connection Doctor output is as follows;
CONNECTED Sep 11 13:07:56.216 [kCFStreamSocketSecurityLevelNone] -- host:smtp.nuvox.net -- port:25 -- socket:0x116364a40 -- thread:0x116429ec0
READ Sep 11 13:07:56.280 [kCFStreamSocketSecurityLevelNone] -- host:smtp.nuvox.net -- port:25 -- socket:0x116364a40 -- thread:0x116429ec0
220 smtp05.atlngahp.sys.nuvox.net ESMTP Fri, 11 Sep 2009 14:07:56 -0400
WROTE Sep 11 13:07:56.302 [kCFStreamSocketSecurityLevelNone] -- host:smtp.nuvox.net -- port:25 -- socket:0x116364a40 -- thread:0x116429ec0
EHLO [192.168.1.119]
READ Sep 11 13:07:56.337 [kCFStreamSocketSecurityLevelNone] -- host:smtp.nuvox.net -- port:25 -- socket:0x116364a40 -- thread:0x116429ec0
250-smtp05.atlngahp.sys.nuvox.net Hello 216.215.204.98.nw.nuvox.net [216.215.204.98], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE 52428800
250-DSN
250-ETRN
250-STARTTLS
250-DELIVERBY
250 HELP
WROTE Sep 11 13:07:56.356 [kCFStreamSocketSecurityLevelNone] -- host:smtp.nuvox.net -- port:25 -- socket:0x116364a40 -- thread:0x116429ec0
QUIT
Message was edited by: stlsmiths

I've tried using "Disk Repair" per Carolyn Samit's other posts ... no luck.
I think Apple Mail is broken ... based on the large number of other posts about this outgoing mail topic !!!!

Mail app refusing to send via smtp

Hi there i was wondering if anyone could help me. i have been using mail app for collecting my aol mail as well as sending. i have awoken one morning to find that it can no longer send mail and it keeps asking me to change the SMTP settings.
I conect to my router through airport as does my fiance on our iBook G4. the iBook is configured exactly the same as the iMac and has no problems connecting to aol accounts, as well as sending and recieving mail.
any ideas?

I'm just posting my solution to help others.

Acronis True Image Notifications sending via SMTP

Similar Messages

Maybe you are looking for