Acropdf.dll crash

Hello,
I installed Adobe Reader 9.3.4 and the program I build crashed viewing a pdf. I managed to build a minimal program that reproduces the problem. Klik on the button and insert the path to the supplied pdf. After de pdf has loaded (or while loading) press the tab button. The program crashes. Adobe Reader 8 doesn't have this problem. Can you tell me how to fix this or if this will be fixed in a future update.
The program can be found here. http://www.megafileupload.com/en/file/289970/Adobe-Crash-zip.html
Thanks in advance!

My colleague notified me the link has a 0 byte file. Sorry for that. I uploaded it again. This is the new file:
http://www.megafileupload.com/en/file/290718/AdobeCrash-zip.html

Similar Messages

AcroPDF.dll crash systematicaly when pressing TAB in any PDF

I am using the Acrobat ActiveX (AcoPDF.dll) for viewing PDF documents.
When a PDF is displayed, pressing TAB key several times makes the document to scroll to the end of document.
If I press TAB again, then the application crash.
This happens with all PDF.
My application is written in C++, but I did a try with the sample (AcrobatActiveXVB) provided in the SDK (9.1), witthout any modification.
The result is the same.
Does any body has experienced the same ? Is there a way to prevent AcroPDF to crash.
Considering that it happens systematicly, the Reader 9 activex can not be used to display PDF.
By the way, I did a try with the Reader 8 activeX and it worked fine without crash.
Thanks for your help.

It is a problem of Adobe Reader 9 and Adobe Acrobat 9. Read this:
http://forums.adobe.com/thread/530591?tstart=0

Acropdf.dll crashes when opening email in Outlook

I'm not sure what forum to post this question in ... hopefully this is the correct one. We have several users whose Outlook crashes whenever they attempt to open an email with a PDF attached. The crash report indicates acropdf.dll is the culprit. This is happening with various versions of Office and Windows. Out of 30,000 users, we have about 100 people with this problem. This problem does not occur with Web Access, only with the Outlook client. I realize this could be a Microsoft issue, but researching a solution showed a lot of people having this problem, and I was hoping someone on here might be able to point me to a solution.
I have uninstalled and reinstalled Office, Reader, Flash, and ActiveX. I have made sure Windows updates have been installed. I have uninstalled and reinstalled all the fonts (copied from another computer with no problems). Nothing solve the problem.
Any ideas?

I may have posted this in the wrong forum. The computers in question have Reader, Flash, and ActiveX installed. When attempting to open an email with a PDF attachment, Outlook encounters an unexpected error and closes. Viewing the crash report show acropdf.dll is the culprit. I didn't see a generic Reader forum to post this is. Let me know if I need to move it to another forum.

11.0.07 crashes acropdf.dll activex control in 3rd party application

Hi, we use a piece of software that makes use of the acropdf.dll library - when updating Adobe Reader (on any version of Windows) to 11.0.07, the software that uses acropdf.dll crashes as soon as it tries to display a PDF (citing acropdf.dll as the module that failed) - rolling back to any previous version of Adobe Reader cures the problem. (Even 11.0.06 works fine) - this has been repeated several times on different machines and different versions of Windows, all with the same result.
Is this a known problem with the latest 11.0.07 release?
Thanks in advance.

Mesmo problema em minha aplicação VB6
Tudo funcionava corretamente. Quando executei a atualização do Adobe Reader XI para 11.0.07 apareceu o erro na aplicação.
"O Visual Basic Parou de Funcionar"
Um problema fez com que o programa parasse de funcionar corretamente. O windows fechará o programa e o notificará caso uma solução esteja disponível.
O erro ocorre quando a aplicação esta rodando e ao abrir o formulário onde contém o componente baseado na dll AcroPDF.dll
O erro também ocorre ao abrir o formulário que contém o componente dentro do VB6 em modo de desenvolvimento..
Não é possivel nem retirar o componente do formulário pois não exibe o formulário e fecha o VB6.
Acredito q o problema esteja na DLL AcroPDF.dll e sua atualização

CoreFoundation.dll crash followed by iTunes Stops Working on Win7 x64

Hello
I had a Sony Vaio laptop (64 Bit Win 7 Pro and Office etc) for almost 2 years. After running latest windows updates (I think) iTunes started stopping at launch.
After searching thru support forums and testing various suggestions, I thought my Win 7 installation got old and corrupted and I was already thinking of upgrading my laptop to i5 or i7, I asked my company to renew my laptop. I started installing my new Sony Vaio.
Same problem reappeared
Safari Quicktime all works. Only iTunes crashes.
Win 7 64 bit Pro
iTunes 10.4.1.10
On event viewer, on iTunes launch, corefoundation.dll crashes, few secs later, I receive
iTunes.exe
10.4.1.10
4e4e1904
CoreFoundation.dll
1.630.14.0
4e0373f7
c0000005
0004bd33
278c
01cc87c8fafbb85e
C:\Program Files (x86)\iTunes.exe
C:\Program Files (x86)\Common Files\Apple\Apple Application Support\CoreFoundation.dll
3c09b303-f3bc-11e0-8034-c0f8daf75f5d
Version=1
EventType=APPCRASH
EventTime=129627786618304736
ReportType=2
Consent=1
UploadTime=129627786624065066
ReportIdentifier=3c09b304-f3bc-11e0-8034-c0f8daf75f5d
IntegratorReportIdentifier=3c09b303-f3bc-11e0-8034-c0f8daf75f5d
WOW64=1
Response.BucketId=2575568783
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=iTunes.exe
Sig[1].Name=Application Version
Sig[1].Value=10.4.1.10
Sig[2].Name=Application Timestamp
Sig[2].Value=4e4e1904
Sig[3].Name=Fault Module Name
Sig[3].Value=CoreFoundation.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=1.630.14.0
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e0373f7
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=0004bd33
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1055
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=9e27
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=9e2778096e7e1e2a2e0302fe58f3eea8
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=9e27
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=9e2778096e7e1e2a2e0302fe58f3eea8
UI[2]=C:\Program Files (x86)\iTunes.exe
UI[3]=iTunes has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a so

Hello
I had a Sony Vaio laptop (64 Bit Win 7 Pro and Office etc) for almost 2 years. After running latest windows updates (I think) iTunes started stopping at launch.
After searching thru support forums and testing various suggestions, I thought my Win 7 installation got old and corrupted and I was already thinking of upgrading my laptop to i5 or i7, I asked my company to renew my laptop. I started installing my new Sony Vaio.
Same problem reappeared
Safari Quicktime all works. Only iTunes crashes.
Win 7 64 bit Pro
iTunes 10.4.1.10
On event viewer, on iTunes launch, corefoundation.dll crashes, few secs later, I receive
iTunes.exe
10.4.1.10
4e4e1904
CoreFoundation.dll
1.630.14.0
4e0373f7
c0000005
0004bd33
278c
01cc87c8fafbb85e
C:\Program Files (x86)\iTunes.exe
C:\Program Files (x86)\Common Files\Apple\Apple Application Support\CoreFoundation.dll
3c09b303-f3bc-11e0-8034-c0f8daf75f5d
Version=1
EventType=APPCRASH
EventTime=129627786618304736
ReportType=2
Consent=1
UploadTime=129627786624065066
ReportIdentifier=3c09b304-f3bc-11e0-8034-c0f8daf75f5d
IntegratorReportIdentifier=3c09b303-f3bc-11e0-8034-c0f8daf75f5d
WOW64=1
Response.BucketId=2575568783
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=iTunes.exe
Sig[1].Name=Application Version
Sig[1].Value=10.4.1.10
Sig[2].Name=Application Timestamp
Sig[2].Value=4e4e1904
Sig[3].Name=Fault Module Name
Sig[3].Value=CoreFoundation.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=1.630.14.0
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e0373f7
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=0004bd33
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1055
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=9e27
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=9e2778096e7e1e2a2e0302fe58f3eea8
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=9e27
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=9e2778096e7e1e2a2e0302fe58f3eea8
UI[2]=C:\Program Files (x86)\iTunes.exe
UI[3]=iTunes has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a so

Need to track if a user printed a doc via builtin AcroPDF.DLL control

I am creating a small application in Visual Studio 2008, using VB.NET.
I am getting a PDF from a webservice, and need to do a couple things:
1.) Show the PDF to the user with all available controls (i.e. Print, Save, Email, Change Size of viewer, etc.).
2.) If the user selects print, I need to know that the user printed the piece so that I can log it to our database with it's 'last printed date'.
I have the retrieval and presenting part all working perfectly using the AcroPDF.dll to tap into the user's Acrobat Reader (latest version) that they have installed on their computer; but can't seem to figure out if there is some way for me to know that the user went into the print dialog from the automatic toolbar that is created and used by the AcroPDF.dll when I use the following command:
AxAcroPDF1.LoadFile(<file name goes here>)
Is there some way for me to intercept some event within the AxAcroPDF1 object so that I can interrogate it an know whether or not the user printed the report?
While I am asking, I will also ask about the Send Email method, is there a way that I can tell if the user clicked on it and went into, and completed, that function?
If there is no default way to tap into the existing infrastructure, is there an easy way for me to 'override' the existing print button so that it calls a function that I create instead of the one it currently does?
I would like to keep the visual aspect like it is, if possible, to keep it as polished as I can.
Thanks,
Jim

lrosenth,
Thanks for the reply! I have only two follow up questions:
1.) What, exact javascript am I supposed to insert into the PDF that will allow me to know if the user printed the document from within my windows based application? I have injected javascript before into a PDF, but for a different reason.
2.) Where, exactly, would I want to inject the javascript into the PDF?
any example javascript code, etc. would be appreciated!
Thanks,
Jim

Problem in using AcroPDF.dll in vb6 application

I have an vb6 application and i want to display a PDF file in a form. I have used AcroPDF.dll and works fine on developmeny system.
But when i install application on client's system i get error "Out of memory" when i try to open the form with PDF control.
can anyone help me with this.
Thanks

Try asking this question in the Acrobat SDK forum.

Use pdf.ocx or AcroPDF.dll to open a pdf file in a form

Hi to all,
I have this kind of problem.
I need to open a pdf in a form, just for reading.
Even if my project is written in VB6, this is not the problem. It could be also in .NET, so I hope you don't reply anything about the development platform.
In a couple of threads, I found two ways to open a pdf in a form: using pdf.ocx or acropdf.dll.
In both cases, this solution works for me in debug, but not in deployed release.
I have two kind of problems:
- if the computer where I execute the program HAS NOT Adobe Reader installed, I have an error "missing dependencies" concerning acropdf.dll or pdf.ocx
- if the computer where I execute the program has Adobe Reader installed, I have an error concerning dll or ocx file version.
The solution works only if the AcroPDF.dll file included in my project has a version equal to the Adobe Reader version installed on the customer's computer.
How can I solve these problems?
The best would be if I could use one of this components without installing Adobe Reader.
If this is not possible, my further question is: if the Adobe Reader version installed on the customer's computer is greater than my AcroPDF.dll, will my project work?
If you need further informations to understand the problem, you can ask me.
Thanks in advance for replies.
Bye
Nino

PDF.OCX was an UNSUPPORTED COMPONENT that stopped being included as of Adobe Reader 7. Also, VB6 support stopped with Reader 7 as well. As Adobe only supports Reader 8 and later, there is no need to worry about either.
AcroPDF.dll is part of Reader - it isn't available separately. So yes, your users will need to have Adobe Reader 8 or later installed on their computer.
As long as you target Reader 8 or above, and AcroPDF.dll - you'll work with Reader 8, 9 and X...

Bib.dll crashing PS 5.1

Hey everyone,
I've come across what I strongly suspect is a weird font issue that's preventing me from working. Until today, PS has never acted up before. I'm running 64-bit Photoshop, v12.1. My work .psd was based on a toolkit .psd off the web - I was missing a font, and I substituted it with my own (one version of Helvetica Neue for another). But the moment I tried to edit the text, PS crashed on me. I reopened, worked on it for a couple more hours, when it crashed again doing the same action. After that I could not open either my own working file, nor the toolkit file.
The crash log says this:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    12.1.0.0
Application Timestamp:    4d90d339
Fault Module Name:    BIB.dll
Fault Module Version:    1.2.2.12130
Fault Module Timestamp:    4d077745
Exception Code:    c0000005
Exception Offset:    00000000000154dd
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    13eb
Additional Information 2:    13eb96961af4137840a8c77088b2606e
Additional Information 3:    18b1
Additional Information 4:    18b189364cc7acc5c20656c1fe72cd84
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
When I came across similar font issues like this one in AE I'd just deinstall the suspect fonts and things are good to go again. However even with my Helvetica removed the .psd files fail to open. I've had a coworker open the psd files on his computer with no issues (same machine and sofware specs), and I've also tried to have him change all the type to a default font and saving it as another file name, but even then I cannot open the file. I then began to suspect something was wrong with my PS, so I did a reset of my preferences and blew away my user settings. When that didn't work, I also had PS reinstalled -- still no luck.
Any suggestions how to move forward with this? I don't care so much about losing my current work file, but if I'm unable to even open up my toolkit .psd then I can't do anything. Are there other file formats I can save these files as (does that even change anything)?

I just ran the script through, none of the fonts are corrupted. It seems like the issue began as a font problem, but now it's gone beyond that.
As for corrupt install, I had also tried reinstalling Photoshop. I trashed all my settings and tried opening up a new redownload of the toolkit .psd -- it appeared to be opening it but had the same bib.dll crash when it hit around 40%. I would ideally want this issue resolved without formatting my entire computer...

BOXI 4 SP2 Patch 11 - Constant awt.dll crashes in the Event Log

Hi All,
Since implementing BOXI 4 SP2 Patch 11 I have noticed very frequent awt.dll crash error messages triggered by SAP JVM throughout the event log.
Does anyone know what is causing this and how to resolve?
=================================================================
Faulting application name: java.exe, version: 6.0.170.4, time stamp: 0x4c3bb897
Faulting module name: awt.dll, version: 6.0.170.4, time stamp: 0x4c3bfa5f
Exception code: 0xc0000005
Fault offset: 0x00000000000d2210
Faulting process id: 0x1c80
Faulting application start time: 0x01ccefaba2a15b7a
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\bin\java.exe
Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\jre\bin\awt.dll
Report Id: a6ef5e00-5ba2-11e1-a8c2-da6052897efd
====================================================================
Also notice this error immediately afterwards reporting Transaction Deadlocks in our repository and auditing databases on SQL Server :-
=====================================================================
Database access error. Reason [Microsoft][SQL Server Native Client 10.0][SQL Server]Transaction (Process ID 63) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction..
=====================================================================
SQL Server version is 2008 Release 2.
Have deployed BOXI 4 using Tomcat 6/Java platform.
O/S in Windows Server 2008 Release 2.
This should be a supported configuration so need ideas on why this is happening?
Cheers,
Gary

Hi All,
SAP Support finally came through for us on this.
The issue is due to the version of the SAP JVM that comes bundled with BOXI 4 SP2 Patches 11 and 12.
If you download the latest version of the SAP JVM from the SAP support portal and install this instead then the problems are resolved.
Thanks,
Gary

Difference between AcroPDF.dll and Acrobat.exe while loading standard and custom plug_ins

Hi,
I want to know the difference of behavior when AcroPDF.dll loading the PDF file in the internet explorer and Acrobat.exe application loading PDF in context of plug_ins developed by Adobe or Custom plug_ins using SDK.
When I am loading PDF within Acrobat.exe all the plug_ins (Standard as well as Custom) loaded successfully and working fine but at the same time if I am loading a document within Internet Explorer, behind the scene internet explorer using AcroPDF.dll which is ActiveX for IE to load PDF and it is trying to load plug_ins (standard and custom) but some how my custom plug_in is destroyed or currpted and it is not working any more.
I want to know how AcroPDF and Acrobat.exe using AcroExch.App class or using any other thing to load plug_ins?
Thanks,
Twinkle

For this level of support, you join our developers/partners program and submit a formal support request.

How to use AcroPDF.dll even if addon is deactivated in InternetExplorer

Hello,
hopefully someone can help me with my problem:
I need to instantiate AcroPDF.dll and have it deactivated at the same time in InternetExplorers Addon-settings.
But when I deactive the addon in IE, CreateObject("AcroPDF.PDF.1") throws an error that the instance could not be created, but the dll is still registered.
How does this deactivation work technically? Is there any way to use the dll in other applications regardless of the IE-settings?
Best regards and thanks in advance,
Thomas

For programming issues you should use the forum for Acrobat SDK.

Vb6: open pdf in form using pdf.ocx or acropdf.dll

Hi to all,
I have this kind of problem.
I need to open a pdf in a form, just for reading.
In a couple of threads, I found two ways to make this: using pdf.ocx or acropdf.dll.
In both cases, this solution works for me in debug, but not in deployed release.
I have two kind of problems:
- if the computer where I execute the program HAS NOT Adobe Reader installed, I have an error "missing dependencies" concerning acropdf.dll or pdf.ocx
- if the computer where I execute the program has Adobe Reader installed, I have an error concerning dll or ocx file version.
How can I solve these problems?
The best would be if I could use one of this components without installing Adobe Reader.
If you need further informations to understand the problem, you can ask me.
Thanks in advance for replies.
Bye
Nino

Post your problem in the forum for Acrobat SDK.

PDF.OCX or AcroPDF.DLL

We have a Powerbuilder 9 and 10 application that use to use PDF.OCX, but we can no longer register the
file. We have also read this is no longer supported so we started investigating AcroPDF.DLL. Problem is no matter what we register, we receiv
e an error and this was the same error we receive when we register the PDF.OCX. We recently updated our machines to Windows XP Sp3, but that appears to be the only thing that was done. I have downloaded the Acrobat SDK and cannot figure out what we'd do to have Powerbuilder be able to choose the com object.
"DLL RegisterServer in acroPDF.DLL failed. Return code was 0x80004005"
Any help would be appreciated plz. Thanks.

lrosenth
e como é que posso instalar o AcroPDF.DLL no Delphi 7 ?

When opening a PDF in IE 10 with Enhanced Protection Mode it displays "This website wants to run acropdf.dll"

I am running my application which requires JRE on Internet Explorer 10. Since the IE need to run in 64 bit mode, we have enabled the "Enhanced Protection Mode" in Security option of Internet Options in Advanced tab. But my application also opens
up PDF in the browser, when the page with PDF is invoked it displays "The webpage wants to run 'AcroPDF.dll'. If you trust this site, you can disable Enhanced Protection Mode for this site to run the control.(Disable)(Always Ignore)". And on
clicking any option the PDF is not displayed.
We would not be able to disable the Enhanced Protection Mode as the 64 Bit JRE would not be invoked for other part of the application.
Please let me know how to resolve this issue.
Regards
Navin

... and/or
Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
http://forums.adobe.com/thread/392489 )
Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4). They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
documents in the Web Browser'.
However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser. It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll.
And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
message bar at the bottom of the window. The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
I think it's about time Adobe released an x64 PDF viewer... Or at least there should be an open/save dialogue box in IE.
If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
(The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead. But it doesn't. And with the Reader add-on disabled you get the same page, but without the
message at the bottom.)

Acropdf.dll crash

Similar Messages

Maybe you are looking for